Search results for: 'ascender rope caving device for 1 2 rope'

The Ascension Ascender by Petzl is the benchmark for handled ascenders and has been refined to provide greater comfort; efficiency, ease of use. Learn More

Our enhancements include adjustable spring tension, a reversible cable and pin, and "mud vents" to help prevent dirt caked on rope from degrading ascender performance. Learn More

1 1/2: Manila rope Learn More

Designed by top cavers for tight places in the most remote areas on earth (or under it). Surprisingly simple the new designs are comfortable to use thanks to the ergonomic grips. Learn More

A comfortable, durable caving harness with metal attachment points. The FRACTIO's double belt is very comfortable and the aluminum attachment points are specially designed for comfort and ease of use. Learn More

Cable Clamp: Crosby Wire Rope Clip Learn More

Rope thimbles protect the rope from wear whenever you have a fixed loop in the end of the rope, whether the rope is tied, spliced, or swaged. Learn More

When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More

A 1" Climbing Rope and/or a Swing Rope. We make our 1" Climbing/Swing Ropes with Multiline II Rope. Multiline II Rope is strong, durable and resistant to UV rays. Our 1-1/2" Ropes are made with Combo Rope, aka poly-dac rope, which is similar to Multiline. The 1" Nitro Swing Rope also have a Pear Shaped Sling Link on the thimble to make it possible to hang them with a Rapid Link. All of these ropes have a metal thimble at one end and a back-splice at the other end.We offer multiple lengths. If you require a length other than what we have listed; please give us a call at (877) 206-8967

Learn More

The GRIGRI 2 belay device with assisted braking is designed to facilitate belay maneuvers. Learn More

Our Galvanized Aircraft Zip Lining Cable is made in accordance with Federal Specification RR-W-410D, meeting the dimensional and strength requirements of MIL-W-83420D. Learn More

This self-trailing MIO rope grab grips automatically in the event of a fall and dissipates the energy of the fall by slipping along the rope. When used within OSHA guidelines on approved ropes, the amount of slip is well within the OSHA requirements. This rope grab comes with a lanyard and an ANSI Snap Hook. for use on 1/2" ropes.

 

Learn More

Originally designed for single rope descents in caving, the Stop has become a standard tool for the rope access worker. The Stop is designed to automatically "stop" the descent when the red handle is not depressed. Learn More

Rope climbing is made easier by the CMI Foot Ascender. The addition of this boot-mounted device maintains tension on the rope, allowing for easier advancement of the main ascender, and promotes better use of body mechanics by keeping your body in an upright position. Learn More

3 Strand Import Polydacron Rope combines filament and staple/spun polyester wrapped around a polyolefin core to produce a rope with considerably lower stretch, better wear life and superior handling characteristics.

• Color: White/Red
• Material: Polyester Blend
• Construction: 3 Strand
• Easy to splice
• Ideal for Element Construction

Learn More

Teufelbergers - New England Ropes 3 Strand Multiline II is a unique construction that combines filament and staple/spun polyester wrapped around a polyolefin core to produce a rope with considerably lower stretch, better wear life and superior handling characteristics.

• Color: White/Orange
• Material: Polyester Blend
• Construction: 3 Strand
• Easy to splice
• Ideal for rigging

Learn More

CMI Twin Expedition Arborist Ascender, The Twin Expedition is the first single-handled dual ascender designed to meet the needs of industry leading arborist professionals. The EXPTWIN easily accommodates three rope techniques - 2:1 doubled rope technique (DdRT), 1:1 single rope technique (SRT), and 1:1 twin line ascent (DbRT). Learn More

Zipline Cable Ferrule - Zinc Plated, Two ferrules are required for life support and ziplining applications (ACCT Standards). The extra ferrule serves as a backup in case of primary ferrule failure due to defects or improper swaging. A 12 ton crimper/compression tool is required for 1/4" - 1/2" ferrules Learn More

Kong Futura Hand Ascender, It is extremely small though easy to use, weighs only 125g, and comes with two different sized handles for ergonomic customisation Learn More

Petzl Pantin Ascender, A big advantage for long rope ascents. With the Pantin Ascender supporting the foot, the body is held in a more upright position thus making the ascent faster and less tiring for the arms. Learn More

Steel cable with aluminum rungs. Can be used in ropes courses, caving, rope access work, or emergency preparedness kits.

• Length 32 feet
• Weight: 3 lbs 4 oz.
• Width: 6"
• Breaking Strength: 1324 lbs.

Learn More

CMI EXPEDITION ASCENDER, The Expedition Ascender is a perfect choice for big wall or mountaineering endeavors. Engineered for comfort, the handle opening is extra wide to accommodate gloved hands. Works with 7mm-12mm ropes. Sold individually. Learn More

Gripple Ropes Course Cable Connector, Learn More

100% polyester static kernmantle construction that is lightweight and offers super low-elongation. Learn More

Petzl Shunt Ascender, It locks onto either a single rope or double ropes of the same diameter and holds well on icy and muddy ropes. Learn More

Compact belay device with assisted braking for lead climbing or top rope. All metal construction with cam and friction components in stainless steel for great durability. The rope exits following the device’s axis to avoid twisting. The BIRDIE can be used with all dynamic single ropes from 8.5mm to 11mm.

• All steel construction
• Compatible with ropes from 8.5mm to 10.5mm
• Weight: 210g 7.4 oz

Learn More

Petzl ASAP Fall Arrest Device, In normal use, the device moves freely along the rope without any manual intervention and accompanies the user in all his movements. Learn More

A 5/8" Climbing Rope and/or a Swing Rope. We make our 5/8"Climbing/Swing Ropes with Multiline II Rope. Multiline II Rope is strong, durable and resistant to UV rays. Our 1-1/2" Ropes are made with Combo Rope, aka poly-dac rope, which is similar to Multiline. All of these ropes have a metal thimble at one end and a back-splice at the other end.We offer multiple lengths. If you require a length other than what we have listed; please give us a call at (877) 206-8967

Learn More

Ferrules must be properly crimped to achieve holding strength. Properly swaged ferrules can hold 90% of cable strength. Two ferrules are required for life support and ziplining applications (ACCT Standards). Learn More

Trapeze bar designed for use on ropes challenge courses: leap of faith. Our Trapeze Bar is made from 1-1/2" solid high density PVC. Learn More

Our Galvanized Aircraft Zip Lining Cable is made in accordance with Federal Specification RR-W-410D, meeting the dimensional and strength requirements of MIL-W-83420D. Learn More

Petzl Basic Ascender, The BASIC is a compact ascender that offers excellent grip for rope ascents. The lower attachment hole is large enough to hold the carabiners for the lanyard and the footloop. Learn More

Petzl Croll Ascender, The CROLL chest ascender is unmatched for efficiency on fixed lines. Compact and lightweight, it does not interfere with progression. The stainless steel wear plate improves durability by reinforcing the rope friction zone. Learn More

Petzl Rope Bucket, The Petzl Rope Bucket has a unique tapered design and thin layer of closed cell foam enable the bag to stand up by itself and stay open. Learn More

In a bind, this ultra-lightweight ascender can be used to build hauling systems or as a Prusik-replacement in self-rescue situations. Learn More

Kong Futura Foot Ascender, the Futura system (hand ascender, chest ascender and foot ascender) will be the most compact SRT hardware available on the market - but it will not be the cheapest! The Futura is here. A radical new approach to climbing ropes. Designed by top cavers for tight places in the most remote areas on earth (or under it). Surprisingly simple the new designs are comfortable to use thanks to the ergonomic grips. Learn More