Back to Top
Search results for: 'comparison life'
- Did you mean
- companion line
- comparison line
-
Head Rush Gorilla RopeAs low as $362.40The Head Rush Gorilla Rope is specially designed to work as a reduction line for zipSTOP zipline braking system. Brings high strength, a long life span, and minimal stretch to your zipline runs. Learn More -
Swaging Tools - 1/4" - 3/8" Cable CrimperAs low as $174.00The 1/4, 5/16, and 3/8 Swaging Tools are designed for crimping copper and aluminum oval sleeves and stop sleeves on zip lines, life lines,ropes course elements. Learn More
-
CMI ROPE PULLEY RP103$91.00For hostile environments and maximum service life. Blue Anodized Aluminum sideplates, 2 3/8" Aluminum sheave, Bearing, and Stainless Steel axle. Learn More
-
Shoulder Eye Screw LagAs low as $5.94Shoulder Eye Screw Lag, Use for connecting hand lines, spiders webs to trees, etc. on challenge courses. Do not use in life support applications. Also used when wrapping cable around a tree. Learn More
-
Wire Rope - Zipline Cable Copper Ferrule -1/4"$2.10Ferrules must be properly crimped to achieve holding strength. Properly swaged ferrules can hold 90% of cable strength. Two ferrules are required for life support and ziplining applications (ACCT Standards). Learn More
-
Wire Rope - Zipline Cable Copper Ferrule -3/8"$5.00Ferrules must be properly crimped to achieve holding strength. Properly swaged ferrules can hold 90% of cable strength. Two ferrules are required for life support and ziplining applications (ACCT Standards). Learn More
-
Wire Rope - Zipline Cable Copper Ferrule -1/2"$9.00Ferrules must be properly crimped to achieve holding strength. Properly swaged ferrules can hold 90% of cable strength. Two ferrules are required for life support and ziplining applications (ACCT Standards). Learn More
-
CMI MICROTROLLEY PULLEY$129.95The CMI Velocity Micro Zipline trolley is a fast zip line trolley that is small and light weight. Stainless steel side plates assure long life and minimal wear. Learn More
-
Wire Rope - Zipline Cable Ferrule - Zinc PlatedAs low as $2.25Zipline Cable Ferrule - Zinc Plated, Two ferrules are required for life support and ziplining applications (ACCT Standards). The extra ferrule serves as a backup in case of primary ferrule failure due to defects or improper swaging. A 12 ton crimper/compression tool is required for 1/4" - 1/2" ferrules Learn More
-
ROPE: Three Strand Polydacron - Import RopeAs low as $1.10
3 Strand Import Polydacron Rope combines filament and staple/spun polyester wrapped around a polyolefin core to produce a rope with considerably lower stretch, better wear life and superior handling characteristics.
- Color: White/Red
- Material: Polyester Blend
- Construction: 3 Strand
- Easy to splice
- Ideal for Element Construction
-
Zip Line - Super Swage Compacted Cable / Wire Rope$2.94
Zip Line Super Swaged Compacted Cable / Wire Rope - Zip Line Super cable aka Swaged galvanized cable or compacted wire rope is now available! This incredible cable has at least five times the life of ordinary cable, 25% more strength, 10% faster, and runs 50-70% quieter than traditional cable! This is the wire rope to use for a smoth zipline ride.
Learn More -
ROPE: MULTILINE II Ropes Course RopeAs low as $1.10
Teufelbergers - New England Ropes 3 Strand Multiline II is a unique construction that combines filament and staple/spun polyester wrapped around a polyolefin core to produce a rope with considerably lower stretch, better wear life and superior handling characteristics.
- Color: White/Orange
- Material: Polyester Blend
- Construction: 3 Strand
- Easy to splice
- Ideal for rigging
-
Head Rush zipSTOP Zip Line Braking System$5,400.00The Head Rush zipSTOP Braking System. This zipSTOP Brake Trolley is engineered for a fine balance. It is able to handle the abuse of heavy impact collisions, yet light enough to increase the odds of reliable reset. Learn More
-
RP 129 NFPA rescue Pulley$156.50
Stainless steel sideplates, 3" red anodized aluminum sheave, bushing, and stainless steel axle.
*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition.
MBS
Rope Capacity
Size
Weight
Efficiency
16000lbs
1/2"
6.75x5.25in
1.65lb
91.7%
Learn More -
Uplift$418.95
Red/Black anodized aluminum sideplates, two 3" aluminum sheaves, bushing, and stainless steel axle.
*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition. *Not Certified*
Learn MoreMBS
Rope Capacity
Size
Weight
Efficiency
12000lbs
1/2"
10x4in
2.6lb
184%
-
Head Rush zipSTOP IR/ zip STOP IR Zip Line Braking System$5,880.00The best brake for your zip line,Head Rush zipSTOP Zip Line Brake uses Head Rush's self-regulating eddy current magnetic braking system to brake zip line riders smoothly, comfortably, and consistently, even at high speeds. Learn More
-
Klein Linemans Wrench - Blue Smasher$100.00
Klein Tools' Lineman's Wrenches are forged from special bar steel and heat-treated for durability and long life. These wrenches are designed for use on heavy three-bolt guy clamps where clearance is limited. Each end has two different size openings, plus a hole at the larger end for turning-in standard pole steps.
- Forged from special bar steel and heat-treated for long life
- Each end has two different size openings
- Small end has 5/8-Inch and 13/16-Inch openings; large end features 29/32-Inch and 1-3/32-Inch openings
- Hole is provided at larger end for turning-in standard pole steps
- Made in USA
- Wrench is suited for use on the heavy three-bolt guy clamps on which clearance is limited
- Dark blue painted finish
-
CMI Swivel$122.95
Rescue Swivel helps to eliminate twisting in critical lines due to load rotation. Its 9000lb (40kN) MBS gives you piece of mind when moving the heaviest of loads, and its sealed ball bearing will keep it operating smoothly for years.
*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition. *Not Certified*
Size: 4 1/4" x 1 3/4"
Learn More
Weight: 5.6 oz
Breaking Strength: 9,000 pounds -
3/4" Timber BoltsAs low as $14.003/4" Timber Bolts, Super strong and easy to install, Timber bolts are used for pole to pole attachments, deck beam mounts, climbing towers, climbing walls, adventure towers, high ropes course elements and low ropes course elements Learn More
-
CMI SHRB$132.00Stainless steel sideplates, 3" aluminum hard coated sheave, bushing, and stainless steel axle. Learn More
-
Turnbuckles: Cable Zip Line TurnbuckleAs low as $15.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Ropes Course Zip Line StaplesAs low as $2.95Ropes Course Zip Line Staples, Staples are the preferred way access ropes challenge course elements and zip line platforms: easy to install, easy to inspect, and easy to climb. If properly installed, the 8" staples can perform as fall protection anchors Learn More
-
Sterling 7mm Accessory Cord 50' (15.5m)$31.14Our larger cords have a very durable sheath and high MBS which makes them great for prusik cords, cordelettes, ice threads, and lightweight low-stretch fixing and hauling "tag" lines. Learn More
-
Sterling 7mm Accessory Cord 50M$95.94Our larger cords have a very durable sheath and high MBS which makes them great for prusik cords, cordelettes, ice threads, and lightweight low-stretch fixing and hauling "tag" lines. Learn More
-
5/8 NUT EYE BOLTSAs low as $6.95Nut Eye bolts are the main bolts used in ropes challenge course and zip line construction. Zipline and other cables are terminated to the eye bolt around a thimble to prevent cable deformation at the turn back. Learn More
-
Petzl Trac Plus Zip Line Trolley$191.94TRAC PLUS Zip Line Trolley, They cannot be dropped, thanks to the VERTIGO WIRE-LOCK carabiner, simplifying their functionality Learn More
-
Robertson Stargate Spinstatic SRD$107.00STARGATE SRD -Shear Reduction Device, The 4" aluminum sheave is hard anodized and pared from any excess weight, while the stainless frame surrounds the sheave with minimal surface contact Learn More
-
Head Rush zipSTOP Bump Stop Replacement$94.80The Head Rush Bump Stop is considered a sacrificial part that is designed to wear out over time Learn More
-
New England Redi-Line$0.74An excellent choice for shore-based responders, this cost-effective polypropylene throwline features hollow-braid construction, which makes it easy to handle and stuff into throw bags. Learn More
-
Small UltrascendersAs low as $180.00Our new Ultrascenders are designed to be the most convenient, easiest to use and most comfortable ascenders around. We've added a new ergonomically designed safety mechanism which is integrated into the handle channel for maximum ease. Learn More
-
3/4" Nut Eye Bolts$11.40Nut Eye bolts are the main bolts used in ropes challenge course and zip line construction. Zipline and other cables are terminated to the eye bolt around a thimble to prevent cable deformation at the turn back. Learn More
-
Petzl TRAC GUIDE Zip Line Trolley$189.95Learn More
The Petzl TRAC GUIDE is a trolley designed for adventure parks. Featuring an ergonomic captive carabiner, it allows the guide to quickly install the trolley on the cable with one hand. Because the carabiner pivots, the trolley remains in position on the cable when it makes contact with the end brake of the zip line. The ends are equipped with protective impact surfaces to reduce the risk of pinched fingers, and two connector support grooves to help avoid abrasion from the cable. The JOKO and AVENTEX lanyards (sold separately) are directly integrated in the carabiner, limiting the risk of separation or loss. The carabiner’s reinforced construction provides greater resistance to damp and salty environments. Product life is extended with highly durable bearings and removable impact surfaces available as spare parts.
- Ergonomic captive carabiner allows the guide to quickly install the trolley on the cable with one hand
- Two aligned sheaves provide excellent stability on the zip line
- Because the carabiner can pivot, the trolley remains in position on the cable when it makes contact with the end brake of the zip line
- Front and rear impact surfaces limit the risk of pinched fingers
- Two positioning support grooves for the connectors limit abrasion from the cable
- JOKO or AVENTEX lanyards are directly integrated in the carabiner, limiting the risk of separating or losing the trolley/lanyard unit (Sold separately)
- Connect easily to the harness with the CARITRAC stowing accessory (included)
- Double-row ball-bearings offer optimal durability
- Carabiner with reinforced construction and hard anodization for greater resistance to damp and salty environments
- Impact surfaces optimize contact between the trolley and the end brake of the zip line
- Carabiner and impact surfaces are completely removable and available as replacement parts to extend the life of the trolley
- Also available in 5-packs
Specifications
- Cable diameter: 9 to 13 mm (may also be used on ropes)
- Material(s): Aluminum frame and carabiner, stainless steel sheave, nylon
- Maximum speed: 25 m/s
- Certification(s): CE EN 17109, CE EN 12278, UIAA
- Weight per unit: 425 g
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Eye 3/4" x 12"$27.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Hook-Hook 3/4" x 12"$27.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Hook 3/4" x 12"$27.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Jaw 3/4" x 12"$27.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
