Search results for: 'tandem speed'
- Petzl Tandem Speed Pulley$99.95Petzl Tandem Speed Zip Line Trolley & Cable Pulley Designed for use on Zip Lines, slightly inclined Tyrolean traverses, on cable or rope. Learn More
- Brakehawk- Zip Line Hand BrakeAs low as $131.94Brakehawk- Zip Line Hand Brake, No more burning through bulky welding gloves or slamming into a zip line bungee brake that leaves you with a hurting neck Learn More
- Yates Speed Wall Ladder$70.00Yates Speed Wall Ladders are designed with the same configuration as the Big Wall Ladders but have 1" wide steps to reduce bulk and weight. Learn More
- Robertson Zip Tour Trolley - Professional Zip Line TrolleyAs low as $300.00A practical zip line tour trolley for professional zip line tours and canopy tours. The ultra-long design provides superior stability and travel on any zip line at any speed. Learn More
- Head Rush zipSTOP IR/ zip STOP IR Zip Line Braking System$5,880.00The best brake for your zip line,Head Rush zipSTOP Zip Line Brake uses Head Rush's self-regulating eddy current magnetic braking system to brake zip line riders smoothly, comfortably, and consistently, even at high speeds. Learn More
- Rock Exotica SwivaEye Carabiners$107.52Rock Exotica Swivel Ropes Course Zip Line Carabiners , The SwivaBiner features a high-strength bushing that will withstand greater abuse than a bearing. The SwivaBiner is designed to re-orient a load, and not provide high-speed rotation. Learn More
- Belay 8- Mini Rescue 8As low as $17.00The Ballet 8 is one of the smallest and strongest mini 8's available. Equipped with Ears, it will serve as a rescue 8, personal escape device, or a regular rappel 8. Learn More
- Robertson Cobra Zip Line TrolleyAs low as $242.00The "COBRA" cable pulley zip line trolley represents the most advanced design work using state of the art engineering techniques to build the safest and finest zip line trolley for the ropes course industry. Learn More
- SINGING ROCK TARZAN HARNESSAs low as $279.95
Full adjustable full body harness intended for rope courses and adventure parks. Speed buckle on the shoulder straps for quick on and off.
- Weight: 1530 grams/54 oz
- Easy to put on and take off
- Shoulder straps connect with Speed Buckle
- Padded waist belt and legs
- Buckle with captive bar matches ANSI and CSA standards
- CE 1019, EN813, EN361
- Zipline Brake Barrell Spring$130.00
These patented barrel springs reduce initial impact by stopping the rider more gradually than traditional springs.
Determining how many springs you will need is easy! Simply take the incoming speed of your rider and for each mph, you need that many springs. (e.g., a 20-MPH zipline needs 20 springs for a 230-lb zipliner).
All spring systems REQUIRE TESTING to the maximum anticipated speed and load as per ACCT. Can be completed with a minimum of 250 lb. weights, sandbags, or bagged rock salt.
These Zipline Brakes install in minutes, NOT hours.
Made in the USA.
Each spring array includes a bumper at the beginning for trolley strikes.
Learn More - Mighty Mini Zip Line Trolley$120.00The Mighty Mini is the only zip line trolley that has 2" wheels which means full size bearings, fast zip line runs, a unbeatable longevity for a small frame trolley Learn More
- Head Rush zipSTOP Brake TrolleyAs low as $238.80The Head Rush Brake Trolley is a replacement for the brake trolley that came with your Head Rush zipSTOP Zip Line Brake. Please ensure that you select the correct size for your zip line cable. Learn More
- Head Rush Lightspeed EZ Clip Zip Line Trolley$214.80The Head Rush Lightspeed EZ Clip Zip Line Trolley’s split-second, one-handed installation (just press the trigger against the zip line) will make your guides happy and increase throughput. Learn More
- Robertson Guide HarnessAs low as $72.00The Robertson Guide Ropes Course/Zip Line Harness is one of the most popular harnesses for ropes challenge courses, caving and adult zip lines. Learn More
- Head Rush Impact Zip Line Trolley$178.80The Impact Trolley is the only trolley on the market engineered specifically for smooth and consistent impact braking with the zipSTOP Zip Line Brake system. Learn More
- Head Rush zipSTOP Brake Trolley with CatchAs low as $288.00The Head Rush Brake Trolley is a replacement for the brake trolley that came with your zipSTOP Zip Line Brake. Learn More
- TECHNIC - ANSI FULLBODY HARNESSAs low as $179.95
A fully adjustable, full body harness for work positioning and fall-arrest. Padded hip belt and leg loops for comfort. Available in Easy Lock buckle or Speed Lock buckles. NFPA version includes Speed Lock buckles and all steel components and attachment points.
- Independently adjustable leg loops and shoulder straps
- Front and rear (dorsal) attachment point for descender placement or work positioning (EN813)
-
Lateral attachment points in accordance with EN 358
- Steel D-rings are movable into "parking position" avoiding being caught-up while in use
- Easy-Lock buckles enable fluent and fast adjustment to fit to users body
-
Slots designed to secure hanging equipment
- Identification and methodical label
- Chest attachment point according to EN 361
- D-ring, flat and padded dorsal attachment point according to EN 361
- Weight: 1620 grams / 57 oz
-
CE 1019, EN 358, EN 813, EN 361
- Singing Rock Technic Full Body HarnessAs low as $176.95
A fully adjustable, full body harness for work positioning and fall-arrest. Padded hip belt and leg loops for comfort. Available in Easy Lock buckle or Speed Lock buckles. NFPA version includes Speed Lock buckles and all steel components and attachment points.
- Independently adjustable leg loops and shoulder straps
- Front and rear (dorsal) attachment point for descender placement or work positioning (EN813)
-
Lateral attachment points in accordance with EN 358
- Aluminum D-rings are movable into "parking position" avoiding being caught-up while in use
- Easy-Lock buckles enable fluent and fast adjustment to fit to users body
-
Slots designed to secure hanging equipment
- Identification and methodical label
- Chest attachment point according to EN 361
- D-ring, flat and padded dorsal attachment point according to EN 361
- Weight: 1620 grams / 57 oz
-
CE 1019, EN 358, EN 813, EN 361
- Fat Cat Zip Line Trolley-5/8", 3/4" CableAs low as $214.00The Fat Cat is from a line of proven performers for zip line operations: Robertson Mountaineering. This specialized design works great for the thicker and larger 1/2" - 3/4" cables used more and more by zip line tours and canopy tours. Learn More
- Head Rush zipSTOP Zip Line Braking System$5,400.00The Head Rush zipSTOP Braking System. This zipSTOP Brake Trolley is engineered for a fine balance. It is able to handle the abuse of heavy impact collisions, yet light enough to increase the odds of reliable reset. Learn More
- Yates Nylon & Dyneema Daisy ChainsAs low as $25.00Yates Nylon & Dyneema Daisy Chains, Classic designed daisy chain made of 11/16" Nylon Super Tape or 12 & 14 mm Dymeema webbing. Learn More
- Edelweiss Challenge Sit HarnessSpecial Price $47.50 Regular Price $49.50
The Challenge harness is built for group-use activities like ropes courses, indoor and outdoor climbing as well as mountaineering. It is an adjustable unpadded harness with three auto locking buckles. A single visible attachment point, closing of the waist on the right side, and two different leg colors for ease and speed of use.
Learn More - Head Rush Lightspeed Micro Zip Line Trolley$130.80It may be small, but don’t underestimate the Head Rush LightSpeed Micro Zip Line Trolley. Learn More
- Head Rush zipSTOP Bump Stop Replacement$94.80The Head Rush Bump Stop is considered a sacrificial part that is designed to wear out over time Learn More
- Robertson SR71 Blackbird Zip Line TrolleyAs low as $190.00Unlike the competition it is assembled using machined axles which may cost more but give the SR-71 zip trolley unparalleled structural integrity. Learn More
- D4 Rescue Descender$295.95
The D4 Work/Rescue Descender features a unique and innovative cam action, which offers precise control at slow or fast speeds. The progressive cam works by way of one cam operating inside another cam. The D4 is the only ANSI certified descender on the market today.
- Weight: 655 grams (23 ounces)
- Strength: MBS 16kN (3597lbf)
- For use with single ropes from 10.5 - 11.5mm (7/16")
- Working Load Rating (WLL): 240kg (551lbs.)
- Certifications: CE EN12841, NFPA 1983, ANSI Z359
- Petzl ZigZag Prusik$335.94Petzl ZigZag Prusik The linked rings provide precision and fluidity when moving around. The pulley is mounted on ball bearings to allow the slack to be taken up easily. Learn More
- Robertson SR71 Hammer Zip Line Trolley$206.40Using machined axles which may cost more but give the SR-71 Hammer zip line trolley unparalleled structural integrity. Learn More
- Petzl Pirana Descender$47.07The PIRANA descender offers multiple braking options and can be installed on the rope without removing it from the harness. Designed for use with canyoning descent techniques. Learn More
- Bungee Cord Shock CordAs low as $25.00Nylon Shock Cord consists of a stranded rubber core covered with braided fiber resulting in an elastic cord with consistent stretch and strength. The durable "bungee type" cord is covered with nylon. Learn More
- Petzl Trac Plus Zip Line Trolley$191.94TRAC PLUS Zip Line Trolley, They cannot be dropped, thanks to the VERTIGO WIRE-LOCK carabiner, simplifying their functionality Learn More
- Petzl Jag Rescue Kit$935.94Ready-to-use reversible rescue kit designed to easily pick off and lower a victim. Learn More
- Serving SleevesAs low as $2.05Serving Sleeves, These are usually in a 1x7 configuration: 1 bundle of 7 strands. Cable used in ropes courses and zip lines is usually 7x19 or 6x24: Much more flexible Learn More
- Zippy Clip N Zip Trolley$214.95
The Zippey Trolley is bi-directional, so there’s no wrong way to fit it. Zippey offers a one handed action with either a single or double locking mechanism for increased safety.
Zippey has a speed rating of 60mph (90kph), which is based on the use of the same high spec deep groove, double row ball bearings, as used in our Zipspeed range. The expected life of the bearings should be more than 1000 miles (1500km).
Accessories available for the Zippey Trolleys
ARC – Anti Roll Back Cam. This innovative add on solves many of the issues associated with modern zip lines. Riders who reach the egress platform can roll back out onto the line requiring staff intervention. The ARC ensures that the rider remains in position over the egress platform by camming against the zip line cable maintaining their position.
Handle Accessory – There is now an available handle accessory for the Zippey making it possible for riders to ‘steer’ into the arrival station.
Learn More - Petzl TRAC GUIDE Zip Line Trolley$189.95
The Petzl TRAC GUIDE is a trolley designed for adventure parks. Featuring an ergonomic captive carabiner, it allows the guide to quickly install the trolley on the cable with one hand. Because the carabiner pivots, the trolley remains in position on the cable when it makes contact with the end brake of the zip line. The ends are equipped with protective impact surfaces to reduce the risk of pinched fingers, and two connector support grooves to help avoid abrasion from the cable. The JOKO and AVENTEX lanyards (sold separately) are directly integrated in the carabiner, limiting the risk of separation or loss. The carabiner’s reinforced construction provides greater resistance to damp and salty environments. Product life is extended with highly durable bearings and removable impact surfaces available as spare parts.
- Ergonomic captive carabiner allows the guide to quickly install the trolley on the cable with one hand
- Two aligned sheaves provide excellent stability on the zip line
- Because the carabiner can pivot, the trolley remains in position on the cable when it makes contact with the end brake of the zip line
- Front and rear impact surfaces limit the risk of pinched fingers
- Two positioning support grooves for the connectors limit abrasion from the cable
- JOKO or AVENTEX lanyards are directly integrated in the carabiner, limiting the risk of separating or losing the trolley/lanyard unit (Sold separately)
- Connect easily to the harness with the CARITRAC stowing accessory (included)
- Double-row ball-bearings offer optimal durability
- Carabiner with reinforced construction and hard anodization for greater resistance to damp and salty environments
- Impact surfaces optimize contact between the trolley and the end brake of the zip line
- Carabiner and impact surfaces are completely removable and available as replacement parts to extend the life of the trolley
- Also available in 5-packs
Specifications
- Cable diameter: 9 to 13 mm (may also be used on ropes)
- Material(s): Aluminum frame and carabiner, stainless steel sheave, nylon
- Maximum speed: 25 m/s
- Certification(s): CE EN 17109, CE EN 12278, UIAA
- Weight per unit: 425 g
- SINGING ROCK PROFI WORKER 3D STANDARD HARNESSAs low as $234.95
Fully adjustable harness for work positioning withcontinuous adjustable webbing, SPEED buckles, padded wide waist belt, anatomicleg loops and shoulder straps.
- super comfortable wide waist belt padding provides maximum comfort when working at height
- strength webbing on the waist belt is stitched in the way that at normal working situation the body weight is absorbed by the padding only
- reflective strap and printing on the waist belt and a reflective strap on the shoulder padding increase the visibility in dark working conditions (the black version of the harness is not equipped with the reflective elements)
- anatomic leg loops and waist belt are covered with strong PES fabric providing high abrasion resistance
- standard easy lock buckles enable smooth adjustment
- narrowed padding and webbing on the shoulder straps in a neck area enhance comfortable work
- leg loops connection straps made from durable PES webbing for better abrasion resistance
- front and back attachment points for fall arrest according to EN 361 marked with additional “A“ marking
- flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus
- front lower attachment point for descender placement or work positioning according to EN 813
- 2 side attachment points for work positioning according to EN 358
- 4 ergonomic braided gear loops with a bearing capacity of 5 kg
- heavier items up to 35 kg can be attached to the webbing on the waist belt
- additional loops on the waist belt and leg loops with a bearing capacity of 5 kg offer additional space for the gear and better gear organization
- wide elastic band at left shoulder strap for the gear attachment (e.g. transmitter)
- slots at the waist belt for Porter tool holder to carry your industrial tools
- shoulder attachment points for confined space rescue according to EN 1497
- chest ascender smart fixation system (using an additional maillon), works best with Cam Clean
- all steel components finished with E-coating for higher corrosion resistance
- identification and methodical label
- Weight: 177g, 62.68oz
- Max Rated Load: 150 kg
- Certifications: EN 358, EN 361, EN 813, EN 1497, CE 1019