Search results for: 'petzl ascension ascenders ascender rope grip climbing ascenders'

Stainless steel sideplates, 3" red anodized aluminum sheave, bushing, and stainless steel axle. 

*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition. 

 

MBS	Rope Capacity	Size	Weight	Efficiency
16000lbs	1/2"	6.75x5.25in	1.65lb	91.7%

 

 

 

Learn More

Red/Black anodized aluminum sideplates, two 3" aluminum sheaves, bushing, and stainless steel axle. 

 *Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition.  *Not Certified*

 

MBS	Rope Capacity	Size	Weight	Efficiency
12000lbs	1/2"	10x4in	2.6lb	184%

Learn More

Robertson and Adventure Gear introduces the Total Transfer PT harness system, a combined transfer and therapy harness system that offers patients a new way to sit, stand, and walk without complex therapy harness transfer setups. Learn More

AVAO BOD Harnesses, The harness also facilitates carrying and organization of tools with multiple equipment loops and retainers for attaching CARITOOL tool holders and TOOLBAG tool-holder pouches. Learn More

LIFT Spreader for NEWTON harness Learn More

Aspir Adjustable Harness, Its low bulk and large range of adjustability also make it great for mountaineering and glacier travel. A great harness too for via ferrata and adventure parks. Learn More

Learn More

Multiline 3-Strand Spliced Rope Zip Line Lanyards (tethers). Plastic teardrop shaped thimble on each end.

Learn More

Nail Chipper Tri-Cut Auger Bits, Typically when drilling a hole for a through bolt as used in ropes course or zip line construction, you will need to drill a hole 1/16" bigger than the bolt you are using. 5/8" bolt requires a 11/16" hole. These are all 18" long bits. 7-1/2" are available by request. Learn More

A proven winner for the ropes course. Double-back buckles on the legs and waist.

One Size Fits Most

Learn More

The Rescue Figure 8 is a special figure 8 for rescue situations and fast rappeling.  It has a special shap for multiple rope locking, allows rappeling with heavy loads, has a high strength, and fits a wide range of rope diameters. Available in light alloy or stainlees steel.

• Weight: 154g, 5.43oz (alloy) 451g, 15.9 oz (stainless steel)
• Material: Light alloy or stainless steel
• Strength: 40kN

Learn More

The original Adaptive Ropes Course harness, the ARC allows all participants to experience challenge courses and ziplines, without regard to physical ability. Designed especially for participants with physical challenges, the ARC features a thickly padded, rigid seat, with integrated chest and pelvic harnesses, secure four point attachment system and dorsal head panel, providing a safe, comfortable harness for experiencing modern ropes courses.

*ARC Spreader Bar sold separately*

Learn More

Stainless steel sideplates, 3"aluminum sheave, bushing, and stainless steel axle. 

 

MBS	Rope Capacity	Size	Weight	Efficiency
16000lbs	5/8"	6.5x4.25in	1.35lb	92.1%

Learn More

Stainless steel sideplates, 2" aluminum sheave, needle bearing, and stainless steel axle.

 

MBS	Rope Capacity	Size	Weight	Efficiency
8000lbs	1/2"	5x2.5in	0.5lb	90.6%

Learn More

Black anodized aluminum sideplates, 2 3/8" zinc coated steel sheave, bushing, and stainless steel axle. 

MBS	Cable/Rope Capacity	Size	Weight	Efficiency
6000lbs	5/8"	4.375x3.5in	0.75lb	91.4%

 

Learn More

Full adjustable full body harness intended for rope courses and adventure parks. Speed buckle on the shoulder straps for quick on and off.

• Weight: 1530 grams/54 oz
• Easy to put on and take off
• Shoulder straps connect with Speed Buckle
• Padded waist belt and legs
• Buckle with captive bar matches ANSI and CSA standards
• CE 1019, EN813, EN361

Learn More

RSRP431 R-ALF Rescue Hauler Pulley- 2 Way Auto Locking Approved standards CE 0120 ANSI Z359 :4: 2007

 The R-ALF Pulley is the latest innovation in Accessability, Rescue, Confined Space working and Work Suspension Systems. The R-ALF Pulley has an over-speed brake built in so that the Pulley will lock on and hold when a fall occurs. The load rated Becket Eye on the R-ALF means that it can be used in combination with Prussic Pulleys to create a 3: 1 or 5: 1 Mechanical Advantage System. The unique design of the R-ALF (design patent applied for), means that an internal brake is not required and therefore it is capable of several thousand cycles and many arrests (minimum 12 monthly service intervals apply). Weight (grams) 1200 Weight (ounces) 43 Rope diameter range (mm) Approved 11mm EN1891-A Ropes Only Number of persons 2

Learn More

 Rescue Swivel helps to eliminate twisting in critical lines due to load rotation. Its 9000lb (40kN) MBS gives you piece of mind when moving the heaviest of loads, and its sealed ball bearing will keep it operating smoothly for years.

*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition.  *Not Certified*

Size: 4 1/4" x 1 3/4"
Weight: 5.6 oz
Breaking Strength: 9,000 pounds

Learn More

The D4 Work/Rescue Descender features a unique and innovative cam action, which offers precise control at slow or fast speeds. The progressive cam works by way of one cam operating inside another cam. The D4 is the only ANSI certified descender on the market today.

• Weight: 655 grams (23 ounces)
• Strength: MBS 16kN (3597lbf)
• For use with single ropes from 10.5 - 11.5mm (7/16")
• Working Load Rating (WLL): 240kg (551lbs.)
• Certifications: CE EN12841, NFPA 1983, ANSI Z359

Learn More

A Super-efficient slicing tool that makes the most of its simple design and sturdy construction, the Vital Zip Knife holds a utility blade which is easily replaced once dull with a quick release of the Phillips screw holding the blade in position. The Vital Zip works well for cutting webbing and rope and to remove clothing from injured persons in rescue situations. And its feather light aspect means it can be carried along on a belt or in a kit pack without adding undue weight to your gear.

Learn More

The Redirection Pulley is the first pulley of its kind for the zip line industry; lightweight, corrosion-resistant and specially engineered to be virtually resistant to snagging. Learn More

The CMI Velocity Micro Zipline trolley is a fast zip line trolley that is small and light weight. Stainless steel side plates assure long life and minimal wear. Learn More

This is a great low profile SRD with a parallel attachment to easily align cable and belay loading. Super strong with a triple axle design and a thick folded plate design. Learn More

Shoulder Eye Screw Lag, Use for connecting hand lines, spiders webs to trees, etc. on challenge courses. Do not use in life support applications. Also used when wrapping cable around a tree. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Stainless Steel Cable clamps are ideal for use in salty and acidic environments like zip lining close to oceans or salt lake. These are durable and outlast Drop Forged clamps in harsh environments. Learn More

The smallest and strongest knot passing pulley on the market today! With an incredible MBS of 15,000 lbs and high strength stainless steel, our knot passing pulley puts the others to shame. Learn More

Yates Figure Eight Chest Harness, Great for use on zip line operations. Attachment points at waist and between shoulders. Safety attachment at rear of waist. Padded waist belt. Super easy to get on and adjust. Learn More

The Figure 8 by Omega Pacific remains a popular device for their simplicity, durability and dependability. Learn More

Our most versatile belay and abseil device made of solid stainless steel for durability. Learn More

Nylon Shock Cord consists of a stranded rubber core covered with braided fiber resulting in an elastic cord with consistent stretch and strength. The durable "bungee type" cord is covered with nylon. Learn More

They fit securely on a wide range of flange widths and beam sizes, with a built-in suspension bar that provides for close mounting. The clamp jaw design reduces flange stress by distributing the load away from the flange edge. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More