Back to Top
Search results for: 'tool d rope course harness'
-
CMI Micro Haul Pulleys$190.34The perfect size for light and tower rescues. Fits ropes from 8mm to 1/2". Features built in safety cam for use in "jigger" or "short haul" systems. Use with CMI micro single or double pulley 3:1 or 4:1 mechanical advantage systems. Features a centered bronze bushing. Strength: 7000 lbs. The CMI Single Micro Hauler is 154 mm. tall, 53 mm wide, and 40 mm. thick and 19 g. Learn More -
-10%KONG CHUY BELAY DEVICESpecial Price $17.50 Regular Price $19.50
A smooth feeding, controlled braking device that looks great. Notch on one side of the device provides additional braking friction for thinner ropes giving you controlled descents and belays. Use on 8mm to 12mm ropes.
- Weight: 54 grams
- Rope Diameter Range: 8mm - 12mm
- CE EN15151-2
-
Kong Futura Foot Ascender$102.00Kong Futura Foot Ascender, the Futura system (hand ascender, chest ascender and foot ascender) will be the most compact SRT hardware available on the market - but it will not be the cheapest! The Futura is here. A radical new approach to climbing ropes. Designed by top cavers for tight places in the most remote areas on earth (or under it). Surprisingly simple the new designs are comfortable to use thanks to the ergonomic grips. Learn More
-
LEAP Anchor -As low as $9.95Zip Line LEAP Anchor, A high-strength, multi-purpose anchor that can be used equally well as self-belay anchors on staple climbs or as the ideal termination fitting on belay cables anywhere where the cable load is at 90° to the angle of the bolt Learn More
-
RP 129 NFPA rescue Pulley$156.50
Stainless steel sideplates, 3" red anodized aluminum sheave, bushing, and stainless steel axle.
*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition.
MBS
Rope Capacity
Size
Weight
Efficiency
16000lbs
1/2"
6.75x5.25in
1.65lb
91.7%
Learn More -
Uplift$418.95
Red/Black anodized aluminum sideplates, two 3" aluminum sheaves, bushing, and stainless steel axle.
*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition. *Not Certified*
Learn MoreMBS
Rope Capacity
Size
Weight
Efficiency
12000lbs
1/2"
10x4in
2.6lb
184%
-
CLICK-UP PLUS BELAY DEVICE WITH HMS$89.99
CLICK UP + is an innovative belay device with manual assisted-braking, designed for indoor and crag climbing. It can be used with 8.5-11mm single ropes. The CLICK UP + is compact and lightweight. Allows for the belayer to keep both hands on the rope while belaying or lowering the climber. The V-Proof System (patent pending) reduces the chance of error due to an incorrect handling of the rope when braking. CLICK UP + is supplied, and must be used together, with the specific HMS carabiner CONCEPT SGL HC. The wear-resistant anodizing and ACL system of the carabiners prevents the possibility of minor-axis cross-loading.
- Weight: 110 grams
- Rope diameter range: 8.5mm - 11mm
- CE and UIAA Certified EN15151-2:2012 type 2
Learn More -
5/8" Zip Pulley lanyardAs low as $22.30
Multiline 3-Strand Spliced Rope Zip Line Lanyards (tethers). Plastic teardrop shaped thimble on each end.
Learn More -
-5%RESCUE FIGURE 8Special Price $42.80 Regular Price $44.99
The Rescue Figure 8 is a special figure 8 for rescue situations and fast rappeling. It has a special shap for multiple rope locking, allows rappeling with heavy loads, has a high strength, and fits a wide range of rope diameters. Available in light alloy or stainlees steel.
- Weight: 154g, 5.43oz (alloy) 451g, 15.9 oz (stainless steel)
- Material: Light alloy or stainless steel
- Strength: 40kN
-
RP105 Heavy Duty 3" Pulley$113.50
Stainless steel sideplates, 3"aluminum sheave, bushing, and stainless steel axle.
Learn MoreMBS
Rope Capacity
Size
Weight
Efficiency
16000lbs
5/8"
6.5x4.25in
1.35lb
92.1%
-
Removable Climbing Hold - Flush Mount -Removable Hold - With Bracket - Concrete$68.95
Removable climbing holds have been machined not to overlap the baseplate. Building this product is a complicated process using climbing holds intentionally designed for the baseplate and key. We recommend you purchase this fully assembled version.
If a climbing hold overlaps the baseplate, it will not meet commercial playground standards. Other products in the industry have their climbing holds overlapping the baseplate.
Once the base plate is attached to your wall, no tools are required to remove and reinstall the hold assembly. A removable climbing hold is ideal when your wall is not in use and you must prevent access to meet ACCT/CPSI standards.
To install, screw the baseplate to the wall, insert the key/climbing hold into the top of the slot and slide the climbing hold down to the bottom of the bracket.
- Plate dimensions are 4-3/4" at the widest x 6-1/2" tall.
- One rock climbing hold and bracket assembly included.
- This product comes fully assembled and includes attachment screws.
- Insert into the slot and slide down to lock in place.
- Slide up and lift out of the slot for easy removal.
- Ten different designs, which are all jugs.
- Large base plate to accommodate large holds and meet ASTM, ACCT, CPSI, and CSA standards.
-
CMI RP117 2" Stainless Steel Service Line Pulley$66.50
Stainless steel sideplates, 2" aluminum sheave, needle bearing, and stainless steel axle.
Learn MoreMBS
Rope Capacity
Size
Weight
Efficiency
8000lbs
1/2"
5x2.5in
0.5lb
90.6%
-
RC 102 Cable Able Pulley$83.50
Black anodized aluminum sideplates, 2 3/8" zinc coated steel sheave, bushing, and stainless steel axle.
MBS
Cable/Rope Capacity
Size
Weight
Efficiency
6000lbs
5/8"
4.375x3.5in
0.75lb
91.4%
Learn More -
Petzl TRAC GUIDE Zip Line Trolley$189.95Learn More
The Petzl TRAC GUIDE is a trolley designed for adventure parks. Featuring an ergonomic captive carabiner, it allows the guide to quickly install the trolley on the cable with one hand. Because the carabiner pivots, the trolley remains in position on the cable when it makes contact with the end brake of the zip line. The ends are equipped with protective impact surfaces to reduce the risk of pinched fingers, and two connector support grooves to help avoid abrasion from the cable. The JOKO and AVENTEX lanyards (sold separately) are directly integrated in the carabiner, limiting the risk of separation or loss. The carabiner’s reinforced construction provides greater resistance to damp and salty environments. Product life is extended with highly durable bearings and removable impact surfaces available as spare parts.
- Ergonomic captive carabiner allows the guide to quickly install the trolley on the cable with one hand
- Two aligned sheaves provide excellent stability on the zip line
- Because the carabiner can pivot, the trolley remains in position on the cable when it makes contact with the end brake of the zip line
- Front and rear impact surfaces limit the risk of pinched fingers
- Two positioning support grooves for the connectors limit abrasion from the cable
- JOKO or AVENTEX lanyards are directly integrated in the carabiner, limiting the risk of separating or losing the trolley/lanyard unit (Sold separately)
- Connect easily to the harness with the CARITRAC stowing accessory (included)
- Double-row ball-bearings offer optimal durability
- Carabiner with reinforced construction and hard anodization for greater resistance to damp and salty environments
- Impact surfaces optimize contact between the trolley and the end brake of the zip line
- Carabiner and impact surfaces are completely removable and available as replacement parts to extend the life of the trolley
- Also available in 5-packs
Specifications
- Cable diameter: 9 to 13 mm (may also be used on ropes)
- Material(s): Aluminum frame and carabiner, stainless steel sheave, nylon
- Maximum speed: 25 m/s
- Certification(s): CE EN 17109, CE EN 12278, UIAA
- Weight per unit: 425 g
-
-6%XF FORGE BELAY DEVICESpecial Price $18.80 Regular Price $19.99
By incorporating a rigid stem on this belay/rappel device, climbers go from full lock-off to whipping out rope in a single, smooth action. No more binding up as the device tries to free itself. The amount of friction can be easily adjusted to suit your particular need. Climbing with fat ropes, a skinny partner or on low-angle slabs? Belay with the U-Grooves and clip into the bottom hole of the XF Forge for less friction. For the ultimate control, wrap that skinny cord around the rigid stem and rappel, figure-8 style.
Learn More -
Petzl P58 SO Open Gated Swivel with Sealed Ball Bearings, Yellow/Black$79.95
The SWIVEL OPEN gated swivel features a wide opening and thus can be attached to a range of products (pulleys, lanyards). It reduces the bulk and weight of component systems and solves the twisting and tangling problems of ropes and lanyards. Sealed ball bearings offer excellent performance and reliability.
Learn More -
ISC R-ALF 5:1 Mechanical Advantage Haul / Rescue Kit$1,528.00
RSRP431 R-ALF Rescue Hauler Pulley- 2 Way Auto Locking Approved standards CE 0120 ANSI Z359 :4: 2007
The R-ALF Pulley is the latest innovation in Accessability, Rescue, Confined Space working and Work Suspension Systems. The R-ALF Pulley has an over-speed brake built in so that the Pulley will lock on and hold when a fall occurs. The load rated Becket Eye on the R-ALF means that it can be used in combination with Prussic Pulleys to create a 3: 1 or 5: 1 Mechanical Advantage System. The unique design of the R-ALF (design patent applied for), means that an internal brake is not required and therefore it is capable of several thousand cycles and many arrests (minimum 12 monthly service intervals apply). Weight (grams) 1200 Weight (ounces) 43 Rope diameter range (mm) Approved 11mm EN1891-A Ropes Only Number of persons 2
Learn More -
CMI Swivel$122.95
Rescue Swivel helps to eliminate twisting in critical lines due to load rotation. Its 9000lb (40kN) MBS gives you piece of mind when moving the heaviest of loads, and its sealed ball bearing will keep it operating smoothly for years.
*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition. *Not Certified*
Size: 4 1/4" x 1 3/4"
Learn More
Weight: 5.6 oz
Breaking Strength: 9,000 pounds -
D4 Rescue Descender$295.95
The D4 Work/Rescue Descender features a unique and innovative cam action, which offers precise control at slow or fast speeds. The progressive cam works by way of one cam operating inside another cam. The D4 is the only ANSI certified descender on the market today.
- Weight: 655 grams (23 ounces)
- Strength: MBS 16kN (3597lbf)
- For use with single ropes from 10.5 - 11.5mm (7/16")
- Working Load Rating (WLL): 240kg (551lbs.)
- Certifications: CE EN12841, NFPA 1983, ANSI Z359
-
GriGri 2 Belay Device$99.95The GRIGRI 2 belay device with assisted braking is designed to facilitate belay maneuvers. Learn More
-
Petzl Rollclip$47.94Pulley carabiner, available in versions with or without TRIACT-LOCK locking system. Learn More
-
Petzl ZigZag Prusik$335.94Petzl ZigZag Prusik The linked rings provide precision and fluidity when moving around. The pulley is mounted on ball bearings to allow the slack to be taken up easily. Learn More
-
Redirection Pulley$105.60The Redirection Pulley is the first pulley of its kind for the zip line industry; lightweight, corrosion-resistant and specially engineered to be virtually resistant to snagging. Learn More
-
-
-
Petzl Kootenay$239.94Knot-passing pulley allows passage of joining knots Large diameter sheave mounted on sealed ball bearings for excellent efficiency. Learn More
-
Petzl Micro Traxion$149.94MICRO TRAXION is an ultra-compact, extremely light progress capture pulley that is exceptionally efficient. The cam can be locked in open position so the device can be used as a simple pulley. Learn More
-
Petzl Jag Traxion$161.94Double progress capture pulley designed for use with the JAG double pulley to make a 4:1 haul system. Sheaves mounted on sealed ball bearings for excellent efficiency. Learn More
-
CMI Highline Knot Passing Pulley$243.95The smallest and strongest knot passing pulley on the market today! With an incredible MBS of 15,000 lbs and high strength stainless steel, our knot passing pulley puts the others to shame. Learn More
-
Kong Pro Cave Ascenders$117.00Designed by top cavers for tight places in the most remote areas on earth (or under it). Surprisingly simple the new designs are comfortable to use thanks to the ergonomic grips. Learn More
-
Petzl Caterpillar Edge Protector$179.94Petzl Caterpillar Edge Protector, The Caterpillar Edge Protector can be positioned independently to adapt to whatever the terrain throws at you Learn More
-
Petzl Jag Rescue Kit$935.94Ready-to-use reversible rescue kit designed to easily pick off and lower a victim. Learn More
-
Petzl Pro Pulley$89.94Openable even when attached to the anchor, the PRO pulley is designed for maximum simplicity when setting up hauling or load deviation systems. Learn More
-
Edelrid Mega Jul$43.14Our most versatile belay and abseil device made of solid stainless steel for durability. Learn More
-
-10%HAULERBINER RESCUE KIT 300 CMSpecial Price $354.00 Regular Price $391.95
The HaulerBiner Compact Rescue Kit is a lightweight, compact and simple to use/deploy device. The HaulerBiner is fully rated for lifting people. The HaulerBiner has three pulley wheels incorporated into each carabiner, creating a compact and lightweight 6:1 or 7:1 (theoretical) mechanical advantage system. The HaulerBiner also has a purpose-designed progress capture cam with, an ‘on/off’ position. The HaulerBiner utilises purpose-developed 6mm (1/4") rope, for strength and easy handling/best grip. The kit is supplied in a two-pouch bag, for easy deployment. The HaulerBiner is load rated to 140kg (310lbs) but it has an MBS of at least 16kN/3500lbs tested as a complete system. The length of the system, when fully contracted is only 32cm (12"). EN 12278, EN 567 certifications
Learn More -
CMI Double Expedition Ascender$171.95CMI Double Expedition Ascender, The cam is the same design as those in our now famous Ultrascenders and carries the same lifetime wear-out guarantee. Extra large handgrip opening easily accomodates gloved or mittened hands Learn More
