Search results for: 'Ropes Course'/**/and(select'1'from/**/pg_sleep(3))>'0'

This self-trailing MIO rope grab grips automatically in the event of a fall and dissipates the energy of the fall by slipping along the rope. When used within OSHA guidelines on approved ropes, the amount of slip is well within the OSHA requirements. This rope grab comes with a lanyard and an ANSI Snap Hook. for use on 1/2" ropes.

 

Learn More

Nylon Shock Cord consists of a stranded rubber core covered with braided fiber resulting in an elastic cord with consistent stretch and strength. The durable "bungee type" cord is covered with nylon. Learn More

The "COBRA" cable pulley zip line trolley represents the most advanced design work using state of the art engineering techniques to build the safest and finest zip line trolley for the ropes course industry. Learn More

Used as spacers or supports under screw or bolt heads. Our washers are heat treated galvanized. Learn More

Crosby Fist Grip Cable Clamps Learn More

Nail Chipper Tri-Cut Auger Bits, Typically when drilling a hole for a through bolt as used in ropes course or zip line construction, you will need to drill a hole 1/16" bigger than the bolt you are using. 5/8" bolt requires a 11/16" hole. These are all 18" long bits. 7-1/2" are available by request. Learn More

The ELIA helmet was designed and developed to respond specifically to the needs of women. The innovative OMEGA headband system (Petzl patent) allows the helmet to be put on and removed easily and offers maximum comfort. In addition to this exclusive feature, the helmet has a new headband adjustment mechanism. It allows the helmet to be precisely adjusted for different head shapes. Learn More

They fit securely on a wide range of flange widths and beam sizes, with a built-in suspension bar that provides for close mounting. The clamp jaw design reduces flange stress by distributing the load away from the flange edge. Learn More

Deep Cut telephone Pole Auger Bits: 24", Super long 24" Pole Auger Bits for telephone poles, utility poles, treated poles, ropes course and zip line poles. Designed for making deep cuts in utility poles, pressure treated lumber, railroad ties, and wet or frozen lumber. Learn More

EYE NUTS and EYELETS, Eyelets, also known as Bolt Eyes, are used under the head or nut of a bolt. All are compatible with the strength of the bolts used with them. Learn More

Lag Screw Lag Bolt - Galvanized, Typically used for LEAP anchors, deck constuction for zip lines and ropes courses. Hot Dipped Galvanized; Hex Head Lag Screw. 5/8" x 6" lags or 5/8" x 8" lags are recommended for Leap/Lead/Bolt hanger anchors where through bolts are not required Learn More

3/4" Timber Bolts, Super strong and easy to install, Timber bolts are used for pole to pole attachments, deck beam mounts, climbing towers, climbing walls, adventure towers, high ropes course elements and low ropes course elements Learn More

Great for ropes courses, zip line, high elements, and low ropes challenge courses. Cable Clamps, sometimes called cable stops or cable clips, are tools that are used to clamp down on wire rope commonly used in industrial applications as well as in zip lining and ropes course construction. Learn More

Mailion Rapid Links (aka "Rapides" or "Quick-Links") are steel screw-links designed for fastening lengths of chain together on ropes courses and zip lining. They provide critical connections for trolleys, balay devices, cables and cable hardware on a zip line. Learn More

Just Perfect Pole Steps : JP Steps Removable utility pole and tree steps. This is the step only. These steps can replace common utility pole steps that have an upturned hook end.

Learn More

Rope Washer by CMI - The unique flow pattern created by CMI's exclusive ducting creates a spiraling, multi-jetting flow pattern that lifts dirt and contaminants out of rope better than conventional designs. Constructed from tough PVC, CMI's rope washer attaches to any standard spigot or garden hose. Learn More

If you plan to wrap the cable around a tree or post and not use bolt a tree wrap is what you need. Learn More

Adjustable Lobster Claws w/ Snap Hooks and Tri Fold and Girth Hitch Learn More

GIANT SWING / SUSPENSION CLAMP FOR 3/8" CABLE

Galvanized Ductile Iron

Learn More

Apex is the workhorse of the MAXIM® product line. Designed for big wall and trad climbing or for working projects and developing routes, Apex makes an excellent rope for challenge courses and fall protection for safety personnel. Learn More

CMI Ultrabrake, Designed for hard use and maximum UV resistance, the material has a low friction coefficient and is self-lubricating with a non-adherent surface. Learn More

atented cable grabs are designed to provide fall protection for workers ascending or descending from a variety of ladders or vertical structures. The stainless steel cable grab is easily removed or repositioned along a cable. If a fall occurs, the cable grab is designed to immediately lock onto the cable and prevent a free fall. Sold with an integrated shock absorber. Users should be familiar with all warnings and instructions and receive training in the proper use of this device. Product Specs: Universal design Auto traveling operation Durable, lightweight stainless steel design Meets applicable OSHA Standards and ANSI requirements. Recommended lifelines 3/8″ diameter stainless steel or galvanized 7×19 aircraft cable (non-lubed) with minimum tensile strength of 8,000 lbs.

MUST be attached to worker’s harness using ANSI rated autolocking carabiner (NOT included)

Learn More

Cable Drop Plate, The lower 1" tie-in hole allows easy attachment of a carabiner or quicklinks. Hot dip galvanized for lasting durability. Cable drop plates are great for giant ladders, giant swings, rope climbs, tire crossings or just about any ropes course element Learn More

We offer three different style of pilot auger bits for 1/2" lags for ropes course decks, zip line decks and general deck construction for 1/2" & 5/8" lag bolts Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Carriage Bolt w/Nut & Washer, The square neck under the round head will seat into the hole in the wood to prevent the head from turning. Because they are used with wood, carriage bolts are rarely high strength and virtually always supplied in a standard ASTM A307 specification. Learn More

The Fat Cat is from a line of proven performers for zip line operations: Robertson Mountaineering. This specialized design works great for the thicker and larger 1/2" - 3/4" cables used more and more by zip line tours and canopy tours. Learn More

A step up in strength and durability from the RP101 rope pulley. Black Anodized Aluminum sideplates, 2 3/8" Aluminum sheave, Bushing, and Stainless Steel axle. A great all around rope pulley. Learn More

The SEQUOIA is a seat harness for tree care. It is designed for the arborist's comfort. The extra-wide, semi-rigid waist belt and leg loops give excellent support. Learn More

Looking to enhance your program offerings with some specialized equipment? ESI offers three different universal accessibility kits that come complete with a variety of equipment that will help serve the needs of climbers who need additional support. 

 

The UAK-1 comes complete with the following:

If you need additional components for a larger course, ask us about the UAK-2 and UAK-3.

 

• Misty Mountain Easy Seat - a specialized rigid yet padded seat that has an integrated rated harness system allowing lower body support without sacrificing upper body mobility.

 

• Handlebar Ascender (Wellman pull-up bar or similar)  - a traditional ascender mechanism that will grab the rope with the integrated cam while also providing a variety of hand hold options including the built in handlebars.
  
• 1M Mechanical Advantage System (Petzl JAG or similar) - this compact system provides mechanical advantage at your fingertips when climbing at height and needing assistance transferring from one cable to the other. 
  
  
• Trolley w/ anti-rollback cam (ISC Zippy or similar) - this trolley allows for smooth forward movement on a course and option to sit in the system and take a break without losing forward momentum.
  
  
• Bosun chair (Petzl Podium or similar) - a rigid chair that is stowed out of the way on the climber and dropped into position at any point along the climb as an extra seat providing quick lower body support and resting spot.
  
  
• ISC R-ALF Pulley System - this system creates a 5:1 mechanical advantage with integrated locking hub option for those climbers who need assistance ascending vertically into a course. It includes everything needed for the full system including the R-ALF hub, two double pulleys, rope, carabiners and a handy storage bag.

Learn More

These are great carabiners for clipping clients into zip line, rock climbs, ropes course and challenge course elements. These carabiners are light weight, strong and have a wide gate opening. Now made by SMC

Learn More

Our enhancements include adjustable spring tension, a reversible cable and pin, and "mud vents" to help prevent dirt caked on rope from degrading ascender performance. Learn More

GUY ANCHORS- Helix Ground Anchors : 10" x 1-1/4" x 96" Learn More

The Rope Ladder provides moderately challenging access to high elements or an alternative to staple climbs. Constructed of double lashed hardwood dowels with waxed nylon cord to increase durability. Professional installation required.

 

Cost is by: LINEAR FOOT 

Learn More

Just Perfect Pole Steps : JP Steps Removable utility pole and tree steps

Learn More

Deep Cut Pole Auger Bits Learn More