Search results for: 'misty rope'
- Did you mean
- must rope
- mistak rope
-
-
Wire Rope_Ropes Course_Zipline Cable: 5/16" Wire RopeAs low as $0.62Our Galvanized Aircraft Zip Lining Cable is made in accordance with Federal Specification RR-W-410D, meeting the dimensional and strength requirements of MIL-W-83420D. Learn More
-
Zip Line - Super Swage Compacted Cable / Wire Rope$2.94
Zip Line Super Swaged Compacted Cable / Wire Rope - Zip Line Super cable aka Swaged galvanized cable or compacted wire rope is now available! This incredible cable has at least five times the life of ordinary cable, 25% more strength, 10% faster, and runs 50-70% quieter than traditional cable! This is the wire rope to use for a smoth zipline ride.
Learn More -
Mio Mechanical 1/2" Rope Grab$218.00
This self-trailing MIO rope grab grips automatically in the event of a fall and dissipates the energy of the fall by slipping along the rope. When used within OSHA guidelines on approved ropes, the amount of slip is well within the OSHA requirements. This rope grab comes with a lanyard and an ANSI Snap Hook. for use on 1/2" ropes.
Specifications:- Length: 3 Feet
- Maximum Elongation: 42 inches
- Maximum Arresting Force: <900 lbs
- Maximum Free Fall: 6 Feet
- Maximum Capacity: 310 lb
-
Rope ID Markers$39.00Write, type, or stamp information on the ¾ x 1 inch white area. Clear self-laminating portion wraps around to protect writing. Learn More
-
Y Tail - Participant Ropes Course Lanyard$56.95
The Y Tail - Participant Ropes Course Lanyard is manufactured from 1/2" high quality US manufactured PolyDacron 3-strand rope. The lanyard has a loop for girth hitch attachment to the harness and two ANSI rated double-locking snap hooks for connection to the lifeline (belay cable). Lanyards are adjustable from 4' (48") to 6'5" (77").
Learn More -
Wire Rope_Ropes Course_Zipline Cable: 1/2" Wire Rope$2.00Our Galvanized Aircraft Zip Lining Cable is made in accordance with Federal Specification RR-W-410D, meeting the dimensional and strength requirements of MIL-W-83420D. Learn More
-
Wire Rope_Ropes Course_Zipline Cable: 3/8" Wire RopeAs low as $0.72Our Galvanized Aircraft Zip Lining Cable is made in accordance with Federal Specification RR-W-410D, meeting the dimensional and strength requirements of MIL-W-83420D. Learn More
-
CMI ROPE PULLEY RP103$91.00For hostile environments and maximum service life. Blue Anodized Aluminum sideplates, 2 3/8" Aluminum sheave, Bearing, and Stainless Steel axle. Learn More
-
CMI ROPE PULLEY RP104$117.60High strength in a compact design. Stainless Steel sideplates, 2 3/8" Aluminum sheave, Bearing, and Stainless Steel axle. Learn More
-
CMI RP137 Rope Pulley$66.00Purple Anodized Aluminum sideplates, 1 1/4" Aluminum sheave, Bushing, and Stainless Steel axle. Learn More
-
Gemini Double Rope Pulley$102.45Petzl Gemini is a double Prusik pulley with moving side plates designed for technical hauling systems and raising heavy loads. Prusik pulleys are designed to be used with a Prusik hitch, making for a lightweight progress capture system. Learn More
-
CMI RP103BB Ropes Course Pulley$99.18Anodized aluminum sideplates, 2 3/4" aluminum sheave, ball bearing and stainless steel axle. Learn More
-
Felco C16 Wire Rope Cutter$523.20The Felco C16 Wire Cutter has a capacity of 5/8 in. diameter and smaller. This is the GO-TO zipline cable cutter in the industry. Felco cutters keep cutting for years longer than other cable cutters. Learn More
-
Utility Scissors / Rescue Shears Rope Cutters$13.00CMC now offers the standard utility scissors with titanium bonded blades. Using a patented process, titanium is bonded to a stainless steel core to produce a sharper, more corrosion resistant, longer lasting edge. Learn More
-
Wire Rope_Ropes Course_Zipline Cable: 1/4" Wire RopeAs low as $0.60Our Galvanized Aircraft Zip Lining Cable is made in accordance with Federal Specification RR-W-410D, meeting the dimensional and strength requirements of MIL-W-83420D. Learn More
-
Y Tail - Instructor Ropes Course Lanyard with Shock Pack$98.65
Y Tail - Instructor Ropes Course Lanyard with Shock Pack is made from high quality US manufactured 1/2" black Nylon rope. Each lanyard has a shock pack and tripple locking steel carabiner for attachemnt to the harness, and ANSI rated load limiting device (shock pack) and two ANSI rated double locking snap hooks. Each lanyard is adjustable from 4'6" to 6' 4" .
Learn More -
Felco C112 Wire Rope Cutter$710.00The Felco C112 Cutter features maximum force transmission which applies the maximum leverage at just the right moment. This coupled with Swiss precision blades make this cutter very easy to use. Learn More
-
Petzl Ascentree Rope Grab$263.94Handled rope clamp designed for doubled rope ascents, the ASCENTREE has ergonomic handles allowing a comfortable and powerful grip when pulling. Learn More
-
CMI Micro Ropes Course Pulley$33.99Designed for rescue, it is great for portable ropes courses, ski & mountain rescue, tyrolean back ups, rescue kits, Rescue training programs, and hauling up access nets and ladders to challenge courses and climbing towers. Learn More
-
Mio Cable Grab for 3/8" Wire Rope$214.00
atented cable grabs are designed to provide fall protection for workers ascending or descending from a variety of ladders or vertical structures. The stainless steel cable grab is easily removed or repositioned along a cable. If a fall occurs, the cable grab is designed to immediately lock onto the cable and prevent a free fall. Sold with an integrated shock absorber. Users should be familiar with all warnings and instructions and receive training in the proper use of this device. Product Specs: Universal design Auto traveling operation Durable, lightweight stainless steel design Meets applicable OSHA Standards and ANSI requirements. Recommended lifelines 3/8″ diameter stainless steel or galvanized 7×19 aircraft cable (non-lubed) with minimum tensile strength of 8,000 lbs.
MUST be attached to worker’s harness using ANSI rated autolocking carabiner (NOT included)
Learn More -
Wire Rope - Zipline Cable Ferrule - Zinc PlatedAs low as $2.25Zipline Cable Ferrule - Zinc Plated, Two ferrules are required for life support and ziplining applications (ACCT Standards). The extra ferrule serves as a backup in case of primary ferrule failure due to defects or improper swaging. A 12 ton crimper/compression tool is required for 1/4" - 1/2" ferrules Learn More
-
New England Tech CordAs low as $3.60The strongest and smallest cordellete or chock cord available. Tech Cord's 5mm diameter and 5,000 lbs. tensile strength is achieved using a unidirectional Technora core and a bombproof polyester sheath. Learn More
-
Wire Rope - Zipline Cable Copper Ferrule -1/4"$2.10Ferrules must be properly crimped to achieve holding strength. Properly swaged ferrules can hold 90% of cable strength. Two ferrules are required for life support and ziplining applications (ACCT Standards). Learn More
-
Wire Rope - Zipline Cable Copper Ferrule -3/8"$5.00Ferrules must be properly crimped to achieve holding strength. Properly swaged ferrules can hold 90% of cable strength. Two ferrules are required for life support and ziplining applications (ACCT Standards). Learn More
-
Wire Rope - Zipline Cable Copper Ferrule -1/2"$9.00Ferrules must be properly crimped to achieve holding strength. Properly swaged ferrules can hold 90% of cable strength. Two ferrules are required for life support and ziplining applications (ACCT Standards). Learn More
-
BEAL BIRDIE SEMI-AUTO BELAY DEVICESpecial Price $82.50 Regular Price $89.99
Compact belay device with assisted braking for lead climbing or top rope. All metal construction with cam and friction components in stainless steel for great durability. The rope exits following the device’s axis to avoid twisting. The BIRDIE can be used with all dynamic single ropes from 8.5mm to 11mm.
- All steel construction
- Compatible with ropes from 8.5mm to 10.5mm
- Weight: 210g 7.4 oz
-
ARC Universal Full Body HarnessSpecial Price $530.00 Regular Price $545.95
The original Adaptive Ropes Course harness, the ARC allows all participants to experience challenge courses and ziplines, without regard to physical ability. Designed especially for participants with physical challenges, the ARC features a thickly padded, rigid seat, with integrated chest and pelvic harnesses, secure four point attachment system and dorsal head panel, providing a safe, comfortable harness for experiencing modern ropes courses.
*ARC Spreader Bar sold separately*
Learn More -
Universal Accessibility Kit (UAK-1)
Starting at $24.07
Looking to enhance your program offerings with some specialized equipment? ESI offers three different universal accessibility kits that come complete with a variety of equipment that will help serve the needs of climbers who need additional support.
The UAK-1 comes complete with the following:
If you need additional components for a larger course, ask us about the UAK-2 and UAK-3.
- Misty Mountain Easy Seat - a specialized rigid yet padded seat that has an integrated rated harness system allowing lower body support without sacrificing upper body mobility.
- Handlebar Ascender (Wellman pull-up bar or similar) - a traditional ascender mechanism that will grab the rope with the integrated cam while also providing a variety of hand hold options including the built in handlebars.
- 1M Mechanical Advantage System (Petzl JAG or similar) - this compact system provides mechanical advantage at your fingertips when climbing at height and needing assistance transferring from one cable to the other.
- Trolley w/ anti-rollback cam (ISC Zippy or similar) - this trolley allows for smooth forward movement on a course and option to sit in the system and take a break without losing forward momentum.
- Bosun chair (Petzl Podium or similar) - a rigid chair that is stowed out of the way on the climber and dropped into position at any point along the climb as an extra seat providing quick lower body support and resting spot.
- ISC R-ALF Pulley System - this system creates a 5:1 mechanical advantage with integrated locking hub option for those climbers who need assistance ascending vertically into a course. It includes everything needed for the full system including the R-ALF hub, two double pulleys, rope, carabiners and a handy storage bag.
-
Rock Exotica SwivaEye Carabiners$107.52Rock Exotica Swivel Ropes Course Zip Line Carabiners , The SwivaBiner features a high-strength bushing that will withstand greater abuse than a bearing. The SwivaBiner is designed to re-orient a load, and not provide high-speed rotation. Learn More
-
Women's Cadillac Harness$149.98The Cadillac is versatile enough to be used on big walls,zip line, but shines brightest on multi pitch and traditional routes. Constructed wide for comfort, the Cadillac incorporates an inner waist belt layer that spreads forces over 2.7 times more area Learn More
-
Finesse Zipline Harness$95.94The Finesse climbing/zipline harness is designed specifically for women. It is slightly narrower and lighter than our Silhouette harness, making it a great choice for single pitch or sport climbing applications or even zipline runs. Learn More
-
Zip Tether$23.94The Zip Line Tether was built to connect our Full Body harness to the Zip Line pulley Learn More
-
Spreader Bar$83.94The Zip Line Spreader Bar is used in conjuction with the ARC Harness to keep the attachment points equally spread and to prevent pressure on the participant. Can also be used to help the handicapable safely go down a zipline when used along side a Fusion Learn More
-
Adjustable Lobster Claws w/ Snap Hooks and Tri Fold and Girth Hitch$98.00Adjustable Lobster Claws w/ Snap Hooks and Tri Fold and Girth Hitch Learn More