Search results for: 'cypher sawtooth 3 sterl carabiners'

atented cable grabs are designed to provide fall protection for workers ascending or descending from a variety of ladders or vertical structures. The stainless steel cable grab is easily removed or repositioned along a cable. If a fall occurs, the cable grab is designed to immediately lock onto the cable and prevent a free fall. Sold with an integrated shock absorber. Users should be familiar with all warnings and instructions and receive training in the proper use of this device. Product Specs: Universal design Auto traveling operation Durable, lightweight stainless steel design Meets applicable OSHA Standards and ANSI requirements. Recommended lifelines 3/8″ diameter stainless steel or galvanized 7×19 aircraft cable (non-lubed) with minimum tensile strength of 8,000 lbs.

MUST be attached to worker’s harness using ANSI rated autolocking carabiner (NOT included)

Learn More

Our Galvanized Aircraft Zip Lining Cable is made in accordance with Federal Specification RR-W-410D, meeting the dimensional and strength requirements of MIL-W-83420D. Learn More

Used as spacers or supports under screw or bolt heads. Our washers are heat treated galvanized. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Stainless Steel Thimbles, When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More

A superior handling rescue rope, Teufelberger (New England) Ropes KM III static, kernmantle rope features a composite construction of nylon and polyester fibers. Learn More

Square Curved Washers for nut eye bolts and machine bolts. Galvanized Square washers designed for outdoor use in challenge courses, zip lines and other outdoor applications. Learn More

GUY ANCHORS- Helix Ground Anchors, Multiple sizes and capacities allow precise designs for the adventure and zip line industry. There may be one or multiple guywires that can be resisted by one or multiple guy wire anchors, dictated by design and load requirements. Learn More

Nut Eye bolts are the main bolts used in ropes challenge course and zip line construction. Zipline and other cables are terminated to the eye bolt around a thimble to prevent cable deformation at the turn back. Learn More

CMI Ultrabrake, Designed for hard use and maximum UV resistance, the material has a low friction coefficient and is self-lubricating with a non-adherent surface. Learn More

Shoulder Eye Screw Lag, Use for connecting hand lines, spiders webs to trees, etc. on challenge courses. Do not use in life support applications. Also used when wrapping cable around a tree. Learn More

Nylon Shock Cord consists of a stranded rubber core covered with braided fiber resulting in an elastic cord with consistent stretch and strength. The durable "bungee type" cord is covered with nylon. Learn More

The "COBRA" cable pulley zip line trolley represents the most advanced design work using state of the art engineering techniques to build the safest and finest zip line trolley for the ropes course industry. Learn More

Fist Grip Cable Clamp - Import Learn More

Crosby Fist Grip Cable Clamps Learn More

Lag Screw Lag Bolt - Galvanized, Typically used for LEAP anchors, deck constuction for zip lines and ropes courses. Hot Dipped Galvanized; Hex Head Lag Screw. 5/8" x 6" lags or 5/8" x 8" lags are recommended for Leap/Lead/Bolt hanger anchors where through bolts are not required Learn More

They fit securely on a wide range of flange widths and beam sizes, with a built-in suspension bar that provides for close mounting. The clamp jaw design reduces flange stress by distributing the load away from the flange edge. Learn More

Zipline Cable Ferrule - Zinc Plated, Two ferrules are required for life support and ziplining applications (ACCT Standards). The extra ferrule serves as a backup in case of primary ferrule failure due to defects or improper swaging. A 12 ton crimper/compression tool is required for 1/4" - 1/2" ferrules Learn More

Stainless Steel Cable clamps are ideal for use in salty and acidic environments like zip lining close to oceans or salt lake. These are durable and outlast Drop Forged clamps in harsh environments. Learn More

Serving Sleeves, These are usually in a 1x7 configuration: 1 bundle of 7 strands. Cable used in ropes courses and zip lines is usually 7x19 or 6x24: Much more flexible Learn More

Carriage Bolt w/Nut & Washer, The square neck under the round head will seat into the hole in the wood to prevent the head from turning. Because they are used with wood, carriage bolts are rarely high strength and virtually always supplied in a standard ASTM A307 specification. Learn More

If you plan to wrap the cable around a tree or post and not use bolt a tree wrap is what you need. Learn More

Snap shackles are hot drop forged from high resistance stainless steel. Only forging creates a superior steel product, by Increasing its elasticity and maximizing its internal strength. Learn More

Lock washers are a critical component to through bolts on wood poles. Pole shrinkage mandates the use of double coil lock washers to keep pressure on the nut and bolt to prevent loosening. Learn More

Learn More

Cable Clamp: Crosby Wire Rope Clip Learn More

The Head Rush Brake Trolley is a replacement for the brake trolley that came with your Head Rush zipSTOP Zip Line Brake. Please ensure that you select the correct size for your zip line cable. Learn More

The Klein Haven Cable Grip is designed for use when a light, compact grip is desired and where zipline or other cable damage is not a factor. Gripping pressure of the knurled jaw s applied to ¼” of zipline cable area. Learn More

Petzl Basic Ascender, The BASIC is a compact ascender that offers excellent grip for rope ascents. The lower attachment hole is large enough to hold the carabiners for the lanyard and the footloop. Learn More

Ferrules must be properly crimped to achieve holding strength. Properly swaged ferrules can hold 90% of cable strength. Two ferrules are required for life support and ziplining applications (ACCT Standards). Learn More

Mailion Rapid Links (aka "Rapides" or "Quick-Links") are steel screw-links designed for fastening lengths of chain together on ropes courses and zip lining. They provide critical connections for trolleys, balay devices, cables and cable hardware on a zip line. Learn More

A practical zip line tour trolley for professional zip line tours and canopy tours. The ultra-long design provides superior stability and travel on any zip line at any speed. Learn More

The CAPTIV positioning bar favors loading of the carabiner along its major axis, limits flipping and keeps it integrated with the device or lanyard. Learn More

Climbing kit containing CORAX harness, belay system with Am'D carabiner and VERSO belay-rappel device, BANDI chalkbag and POWER BALL chalkball Learn More

HIT Lever hoists have a rugged contruction and a cover to protect the gear case and the brake equipment. The drop forged and heat treated alloy hooks are equipped with safety latches to ensure safety at all times. The steel handle rotates 360 degrees for operation in any posistion. The chain is made from high quality alloy steel and has been specially heat treated for high breaking stress and durability. This hoist has been tested 1.5 times its rated capacity.

• Designed for construction and industrial lifting and pulling applications.
• Rugged steel body construction, lightweight, compact and portable.
• Powder coat painted to protect against rust and corrosion.
• High Tensile alloy steel chain is heat treated for safety and low-wear.
• Shock resistant gear case and brake cover.

Learn More

TRAC PLUS Zip Line Trolley, They cannot be dropped, thanks to the VERTIGO WIRE-LOCK carabiner, simplifying their functionality Learn More