Back to Top
Search results for: 'daisy chains must lock'
- Did you mean
- daisy chains mount lock
- daisy chains misty lock
-
Removable Climbing Hold - Flush Mount -Removable Hold - With Bracket - Concrete$68.95Removable climbing holds have been machined not to overlap the baseplate. Building this product is a complicated process using climbing holds intentionally designed for the baseplate and key. We recommend you purchase this fully assembled version.
If a climbing hold overlaps the baseplate, it will not meet commercial playground standards. Other products in the industry have their climbing holds overlapping the baseplate.
Once the base plate is attached to your wall, no tools are required to remove and reinstall the hold assembly. A removable climbing hold is ideal when your wall is not in use and you must prevent access to meet ACCT/CPSI standards.
To install, screw the baseplate to the wall, insert the key/climbing hold into the top of the slot and slide the climbing hold down to the bottom of the bracket.
- Plate dimensions are 4-3/4" at the widest x 6-1/2" tall.
- One rock climbing hold and bracket assembly included.
- This product comes fully assembled and includes attachment screws.
- Insert into the slot and slide down to lock in place.
- Slide up and lift out of the slot for easy removal.
- Ten different designs, which are all jugs.
- Large base plate to accommodate large holds and meet ASTM, ACCT, CPSI, and CSA standards.
-
Petzl Stef$299.94The STEF device joins the three connection points of the NEST litter and allows it to be easily tilted according to the terrain. Learn More
-
Salamander Guide Throw Bag$82.68The Guide Bag was developed and designed by professional guides. A waist worn bag with 70' of rope meets the requirements for professional operations and insurance. Learn More
-
Petzl Pro Traxion$173.94The PRO TRAXION progress capture pulley is designed to allow rope installation while the pulley is connected to the anchor. With its large diameter sheave and great efficiency, it is particularly appropriate for hauling heavy loads. Learn More
-
Ropes Course Zip Line StaplesAs low as $2.95Ropes Course Zip Line Staples, Staples are the preferred way access ropes challenge course elements and zip line platforms: easy to install, easy to inspect, and easy to climb. If properly installed, the 8" staples can perform as fall protection anchors Learn More
-
Petzl AVAO Sit Work harnessAs low as $270.35PetzlAVAO SIT Zipline/Work harness, With a ventral attachment point that distributes the load between the waistbelt and the leg loops during suspended work Learn More
-
3/4" Timber BoltsAs low as $14.003/4" Timber Bolts, Super strong and easy to install, Timber bolts are used for pole to pole attachments, deck beam mounts, climbing towers, climbing walls, adventure towers, high ropes course elements and low ropes course elements Learn More
-
Petzl I'D Belay Device DescenderAs low as $319.95The Petzl ID is a self-braking descender with an anti-panic function built in. Learn More
-
CYPHER HELIOS SCREW GATE HMS$13.99
Our largest HMS designed for easy belay setup in any situation. The frame’s round bar stock works great with a variety of belay techniques including popular semi-auto locking devices, tube devices, and Munter hitch.
- CE EN12275 Certified
- Weight: 85g
- Strength (major axis): 25kN
-
Petzl Pro Pulley$89.94Openable even when attached to the anchor, the PRO pulley is designed for maximum simplicity when setting up hauling or load deviation systems. Learn More
-
Head Rush Universal Mount$229.95
The Universal Mount is a simple and durable mounting point for auto belays and top rope anchors.
Learn More -
CMI SHRB$132.00Stainless steel sideplates, 3" aluminum hard coated sheave, bushing, and stainless steel axle. Learn More
-
Petzl Swan Easy-Fit Full Body Harness$169.95
Durable, easy-to-use full-body harness for adventure parks
Learn MoreSWAN® EASYFIT STEEL is a full-body harness designed for adventure parks. Its straps are color-coded to make donning easier. It is equipped with a FAST LT PIN-LOCK buckle to secure harness fastening; the PIN-LOCK locking system can only be opened by the guide with a special tool. The raised position of the connection point limits the risk of the client flipping. Its durability makes for easy maintenance and extended product life. Its single size and identification areas simplify equipment inventory management.
Detailed description
- Very easy to use full-body harness designed for adventure parks:
- Easy to install on the client, with FAST buckles at the rear of the harness
- Right/left color coding makes it easier to give donning instructions to clients
- Self-locking DOUBLEBACK buckles for quick and easy adjustment
- Excellent grip on webbing ends facilitates adjustment, even with gloves - Protects the client during progression:
- FAST LT PIN-LOCK waistbelt buckle can only be unlocked with a special tool, limiting the risk of the participant opening the buckle
- Wide ventral attachment point is color-coded green, making it easier to install the JOKO or AVENTEX lanyards and allowing for a quick visual check; the raised position of the attachment point limits the risk of the client flipping
- Anatomical design is close-fitting yet allows optimal freedom of movement
- Two side equipment loops make it easy to carry lanyard connectors - Excellent durability for easy maintenance and extended product life:
- Durable metal attachment point
- Webbing designed for intensive use and smooth adjustment - Easy equipment management for guide or monitor:
- Single size, adapts to most body types
- Marking area on the outside of the harness for easy identification when stored
- Identification panel integrated in the harness to track the equipment throughout its lifespan
- Easy to clean - Accessories to adapt the harness according to need:
- Leg loop foam for greater comfort when hanging for long periods of time
- CARITRAC stowing accessory to easily stow TRAC trolleys - Comes with an unlocking tool for the FAST LT PIN-LOCK buckle which can be easily carried on the guide’s harness
- Available individually or in packs of five
Specifications
- Material(s): Polyester webbing, aluminum attachment point, steel buckles, nylon
- Certification(s): CE EN 12277 type A, UIAA
- Weight per unit: 1125 g
- Waist belt: <120 cm
- Leg loops: <75 cm
- Stature: <200 cm
- Very easy to use full-body harness designed for adventure parks:
-
CLICK-UP PLUS BELAY DEVICE WITH HMS$89.99
CLICK UP + is an innovative belay device with manual assisted-braking, designed for indoor and crag climbing. It can be used with 8.5-11mm single ropes. The CLICK UP + is compact and lightweight. Allows for the belayer to keep both hands on the rope while belaying or lowering the climber. The V-Proof System (patent pending) reduces the chance of error due to an incorrect handling of the rope when braking. CLICK UP + is supplied, and must be used together, with the specific HMS carabiner CONCEPT SGL HC. The wear-resistant anodizing and ACL system of the carabiners prevents the possibility of minor-axis cross-loading.
- Weight: 110 grams
- Rope diameter range: 8.5mm - 11mm
- CE and UIAA Certified EN15151-2:2012 type 2
Learn More -
Petzl Pirana Descender$47.07The PIRANA descender offers multiple braking options and can be installed on the rope without removing it from the harness. Designed for use with canyoning descent techniques. Learn More
-
Wire Rope - Zipline Cable Ferrule - Zinc PlatedAs low as $2.25Zipline Cable Ferrule - Zinc Plated, Two ferrules are required for life support and ziplining applications (ACCT Standards). The extra ferrule serves as a backup in case of primary ferrule failure due to defects or improper swaging. A 12 ton crimper/compression tool is required for 1/4" - 1/2" ferrules Learn More
-
Petzl Falcon Rescue/Zipline HarnessAs low as $180.35Petzl Falcon Rescue/Zipline Harness, The two lateral attachment points transfer the weight evenly around the waistbelt for comfortable surface-supported work/ziplining Learn More
-
KONG HYDROBOT Rappel/Belay Devices$58.00Hydrobot is a new tool conceived for Hydrobot is a new tool conceived for modern canyoning; can be used both with one or two ropes and it allows an easy changement of the braking under load. Learn More
-
Head Rush Impact Trolley Impact Surface Replacement Kit$18.00The Impact Surface Replacement Kit allows you to replace the Impact Surface on your Impact Trolley should it wear out or become damaged. Learn More
-
5/8 NUT EYE BOLTSAs low as $6.95Nut Eye bolts are the main bolts used in ropes challenge course and zip line construction. Zipline and other cables are terminated to the eye bolt around a thimble to prevent cable deformation at the turn back. Learn More
-
Turnbuckles: Cable Zip Line TurnbuckleAs low as $15.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
-8%Singing Rock Universal Top HarnessSpecial Price $45.80 Regular Price $49.99
Fully adjustable harness with a single tie-in point. The top uses the Rock&Lock buckle system that improves fit and performance. Suited for challenge courses, indoor gym climbing or as a lightweight mountaineering harness.
- Weight: 366 grams 12.4 oz
- Number of buckles: 3
- Reinforced tie in
- Drop seat
- CE and UIAA Certified
-
Cable Clamps: Stainless Steel Cable ClampsAs low as $9.50Stainless Steel Cable clamps are ideal for use in salty and acidic environments like zip lining close to oceans or salt lake. These are durable and outlast Drop Forged clamps in harsh environments. Learn More
-
Spreader Bar$83.94The Zip Line Spreader Bar is used in conjuction with the ARC Harness to keep the attachment points equally spread and to prevent pressure on the participant. Can also be used to help the handicapable safely go down a zipline when used along side a Fusion Learn More
-
-4%Edelweiss Challenge Sit HarnessSpecial Price $47.50 Regular Price $49.50
The Challenge harness is built for group-use activities like ropes courses, indoor and outdoor climbing as well as mountaineering. It is an adjustable unpadded harness with three auto locking buckles. A single visible attachment point, closing of the waist on the right side, and two different leg colors for ease and speed of use.
Learn More -
PETZL FREINO$59.94It provides increased friction for single ropes when rappelling or lowering, without extra gear or the need to open the carabiner Learn More
-
Head Rush Impact Trolley Handle Replacement Kit$36.00The Head Rush Impact Trolley Handle Replacement Kit allows you to replace your Impact Trolley T-Handle handles should they wear out. Learn More
-
AVAO BOD HarnessesAs low as $410.35AVAO BOD Harnesses, The harness also facilitates carrying and organization of tools with multiple equipment loops and retainers for attaching CARITOOL tool holders and TOOLBAG tool-holder pouches. Learn More
-
Kong Futura Hand AscenderAs low as $108.00Kong Futura Hand Ascender, It is extremely small though easy to use, weighs only 125g, and comes with two different sized handles for ergonomic customisation Learn More
-
Petzl Jag System$359.94Haul kit for pickoffs, making a releasable anchor, or tensioning a system, thanks to its 4:1 mechanical advantage and excellent efficiency (sheaves with sealed ball bearings). Learn More
-
Cable Clamps: Drop Forged Cable ClampsAs low as $1.75Great for ropes courses, zip line, high elements, and low ropes challenge courses. Cable Clamps, sometimes called cable stops or cable clips, are tools that are used to clamp down on wire rope commonly used in industrial applications as well as in zip lining and ropes course construction. Learn More
-
Y Tail - Participant Ropes Course Lanyard$56.95
The Y Tail - Participant Ropes Course Lanyard is manufactured from 1/2" high quality US manufactured PolyDacron 3-strand rope. The lanyard has a loop for girth hitch attachment to the harness and two ANSI rated double-locking snap hooks for connection to the lifeline (belay cable). Lanyards are adjustable from 4' (48") to 6'5" (77").
Learn More -
Omega XXX-Large Steel D Carabiner$40.87This industrial size carabiner combines a wide gate opening and high strength, useful for attaching to rungs on aerial ladders, buckets and industrial rescue or rope access anchors points that are too big for the large rescue carabiners. Learn More
-
Edelrid Nineteen G Carabiner 5 Pack$65.70The 20 g barrier has been broken! The Nineteen G is the lightest carabiner in the world – and makes no compromises on strength. Learn More
-
Petzl Paw Rigging PlateAs low as $35.94Petzl Paw Rigging Plate, Coming in three sizes for different set ups the PAW provides strong and lightweight organization for your rope set up. Learn More
-
Yates Figure Eight Chest Harness$49.95Yates Figure Eight Chest Harness, Great for use on zip line operations. Attachment points at waist and between shoulders. Safety attachment at rear of waist. Padded waist belt. Super easy to get on and adjust. Learn More
