Search results for: 'eye bolts'

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Yates Adjustable Daisy Strap, The buckle axle is riveted for added security and strength. Contoured webbing eye at carabiner clip attachment end. This configuration allows the strap more rotation, thus reducing jamming in corners. Learn More

Compact and light forged aluminum eye to eye swivel with bearings for smooth rotation under load. Will accommodate two carabineers in each eye.

• Dimensions: 83mm x 39mm/3.26in x 1.5in
• Weight: 88g/3.1oz
• Max. Breaking Strength: 22kN
• Working Load Limit: 4kN
• CE - EN354

Learn More

Snap hooks are recommended as they are easier for small hands, more ergonomically friendly and are permanently attached to the lobster claws. Learn More

Petzl Cheville Autoforeuse 12 mm diameter for an 8 mm threaded bolt Bolt with integrated drill Learn More

This Large Twistlock carabiner has a key gate opening for smooth clips and unclips. No more snagging on ziplining harnesses, cables, gear or bolts. Learn More

Steel carabiners are referred in ropes course, zip line, and cable applications. Learn More

Nail Chipper Tri-Cut Auger Bits, Typically when drilling a hole for a through bolt as used in ropes course or zip line construction, you will need to drill a hole 1/16" bigger than the bolt you are using. 5/8" bolt requires a 11/16" hole. These are all 18" long bits. 7-1/2" are available by request. Learn More

We offer three different style of pilot auger bits for 1/2" lags for ropes course decks, zip line decks and general deck construction for 1/2" & 5/8" lag bolts Learn More

Petzl's Coudee hanger holds the carabiner perpendicular to the rock face, holding the rope away from the rock. The hanger includes an 8mm bolt. Learn More

The Petzl Vrillee hanger is for direct aid. It holds the carabiner parallel to the rock face allowing the rope to run easily through the carabiner. With 8mm bolt Learn More

If you plan to wrap the cable around a tree or post and not use bolt a tree wrap is what you need. Learn More

Cable Clamp: Crosby Wire Rope Clip Learn More

Detachable Pole and Tree Step, These are the preferred security steps for ropes challenge courses either rin trees or poles. Lag bolt and plate are installed into a ropes course pole or tree. Learn More

Designed for use on Challenge ropes course/Zip Lining traverses, on cable or rope. Super strong with a 10,000 rating and a sheathed back up bolt. Stainless steel sides make this cable pulley bomb proof. Learn More

Fist Grip Cable Clamp - Import Learn More

CMI Sport Racks are formed from 5/16" diameter stainless steel and are fitted with oversize stainless steel bars. We chose stainless steel over aluminum because of its "wearever" qualities. Learn More

RSRP431 R-ALF Rescue Hauler Pulley- 2 Way Auto Locking Approved standards CE 0120 ANSI Z359 :4: 2007

 The R-ALF Pulley is the latest innovation in Accessability, Rescue, Confined Space working and Work Suspension Systems. The R-ALF Pulley has an over-speed brake built in so that the Pulley will lock on and hold when a fall occurs. The load rated Becket Eye on the R-ALF means that it can be used in combination with Prussic Pulleys to create a 3: 1 or 5: 1 Mechanical Advantage System. The unique design of the R-ALF (design patent applied for), means that an internal brake is not required and therefore it is capable of several thousand cycles and many arrests (minimum 12 monthly service intervals apply). Weight (grams) 1200 Weight (ounces) 43 Rope diameter range (mm) Approved 11mm EN1891-A Ropes Only Number of persons 2

Learn More

The Slim Ratcheting Lineman Wrench works on four different square sizes, covering all of the common utility pole hardware. The long handle provides plenty of leverage and a tight ratcheting mechanism increases efficiency. The high visibility yellow socket includes a bolt-through design, enabling use on long bolts. Handle is fully integrated for durability.

Features:

• Ratcheting Wrench features four sizes in one tool (4-in-1)
• 3/4-Inch, 13/16-Inch, 1-Inch and 1-1/8-Inch combination square socket sizes
• Works on most common utility pole hardware, such as lag bolts, C clamps and suspension bolts
• Bolt-through design allows bolts to pass through the socket
• Fully integrated handle for durability and non-slip grip for comfort
• Tether hole to keep it connected when working at height
• Bright yellow socket for easy visibility

Specifications:

Learn More

Just Perfect Pole Steps : JP Step II

 

The JP Step I and JP Step II  are Pole/Tree steps and fall protection anchor in one (think integrated LEAD anchor). Installs with 5/8" x 6" lag in poles and 5/8" x 8" lag in trees for the JP I and II. The JP R uses a Specialty 4" Lag Bolt and plate that comes with it. Supports over 5,000 lbs when properly installed. A great alternative to traditional pole steps and staples.  These pole/tree steps are easily installed (about one minute). They also provide great positive climbing aids for hands, feet, and safety anchors. JP Steps for trees and poles are the best looking and safest integrated step - fall protection anchor for ropes courses, challenge courses, and zip line access.

Learn More

Tennis-shoe friendly and stylish—this set offers variety - includes bolts for outdoor use

Learn More

Crosby Fist Grip Cable Clamps Learn More

Lightness and comfort have made the METEOR helmet a signature product for climbing and mountaineering. This model has the advantage of large openings for excellent ventilation. Learn More

Durable and very versatile, the BOREO helmet is suitable for climbing, mountaineering, caving, via ferrata, canyoning... Thanks to its hybrid construction, the helmet is both compact and head-covering. Learn More

Gripple Ropes Course Cable Connector, Learn More

Unlike the competition it is assembled using machined axles which may cost more but give the SR-71 zip trolley unparalleled structural integrity. Learn More

1-3/4" Nylon Webbing Ajustable Lanyards are used for protection on high ropes courses, adventure courses, industrial heights and a variety of home applications. Learn More

These are the basic model with NO snap hooks or Zorber. These are only appropriate for clipping in to protection with some dynamic load absorbing features like rope or fairly slack cable such as a belay cable on a high ropes course or zipline. Learn More

Using machined axles which may cost more but give the SR-71 Hammer zip line trolley unparalleled structural integrity. Learn More

The Zorber Shock absorbing unit is compact and lightweight. When a 220 pound weight is dropped six feet, the maximum arresting force will be less than 900 pounds. Learn More

These lobster Claws are a unique, non-adjustable set of positioning / safety lanyards designed specifically for program high ropes courses. Learn More

Lanyards are used for protection on high zip lining, ropes courses, adventure courses, industrial heights and a variety of home applications. These are designed to meet the standards of high ropes course/zip line protection and many industrial requirements. Learn More

CIFA: 10286 Klein Tools 809-36 hammer is designed and created to strike through jobsite challenges. Engineered with the professional in mind, each tool is job-matched to fit the task at hand. Features: Designed for pole-line work   Rugged and well-balanced, with the weight to drive lag bolts   Forged, tempered-steel head for use in tight areas   Identical faces with round-crown driving surface and beveled edges

Learn More