Back to Top
Search results for: 'joko carabiners climbing carabiner 2 sleev autolock'
-
Square Curved and Square Flat WashersAs low as $2.00Square Curved Washers for nut eye bolts and machine bolts. Galvanized Square washers designed for outdoor use in challenge courses, zip lines and other outdoor applications. Learn More -
Teufelberger (New England) KM III 1/2"$231.60A superior handling rescue rope, Teufelberger (New England) Ropes KM III static, kernmantle rope features a composite construction of nylon and polyester fibers. Learn More
-
Wire Rope - Zipline Cable Copper Ferrule -1/2"$9.00Ferrules must be properly crimped to achieve holding strength. Properly swaged ferrules can hold 90% of cable strength. Two ferrules are required for life support and ziplining applications (ACCT Standards). Learn More
-
Petzl Captiv$26.34The CAPTIV positioning bar favors loading of the carabiner along its major axis, limits flipping and keeps it integrated with the device or lanyard. Learn More
-
Shoulder Eye Screw LagAs low as $5.94Shoulder Eye Screw Lag, Use for connecting hand lines, spiders webs to trees, etc. on challenge courses. Do not use in life support applications. Also used when wrapping cable around a tree. Learn More
-
CMI UltrabrakeAs low as $188.00CMI Ultrabrake, Designed for hard use and maximum UV resistance, the material has a low friction coefficient and is self-lubricating with a non-adherent surface. Learn More
-
PETZL FREINO$59.94It provides increased friction for single ropes when rappelling or lowering, without extra gear or the need to open the carabiner Learn More
-
Wire Rope - Zipline Cable Ferrule - Zinc PlatedAs low as $2.25Zipline Cable Ferrule - Zinc Plated, Two ferrules are required for life support and ziplining applications (ACCT Standards). The extra ferrule serves as a backup in case of primary ferrule failure due to defects or improper swaging. A 12 ton crimper/compression tool is required for 1/4" - 1/2" ferrules Learn More
-
Petzl AM'D Pin-Lock$37.14The Am'D PIN-LOCK asymmetrical aluminum carabiner is designed for use with groups. It secures the connection of the user thanks to its PIN-LOCK system, which can only be opened by the operator with a specific unlocking tool. Learn More
-
-
-
Petzl Coudee Hanger$5.94Petzl's Coudee hanger holds the carabiner perpendicular to the rock face, holding the rope away from the rock. The hanger includes an 8mm bolt. Learn More
-
Kong K.K.R Via Ferrata$131.94The Kong KKR Via Ferrata set comes complete with carabiners, and is simply attached to the harness using a lark's foot Learn More
-
/12" Carriage Bolt w/Nut & WasherAs low as $1.65Carriage Bolt w/Nut & Washer, The square neck under the round head will seat into the hole in the wood to prevent the head from turning. Because they are used with wood, carriage bolts are rarely high strength and virtually always supplied in a standard ASTM A307 specification. Learn More
-
Large D Twistlock -ANSI$23.07This Large Twistlock carabiner has a key gate opening for smooth clips and unclips. No more snagging on ziplining harnesses, cables, gear or bolts. Learn More
-
A.L.F. AUTO BELAY/LOCKING PULLEYAs low as $429.00This innovative, all-in-one Pulley/Auto belay for fall protection is lightweight and easy to use. Auto belay pulley Locks in either direction (right or left) while climbing up or down. Learn More
-
Petzl Basic Ascender$83.94Petzl Basic Ascender, The BASIC is a compact ascender that offers excellent grip for rope ascents. The lower attachment hole is large enough to hold the carabiners for the lanyard and the footloop. Learn More
-
Robertson Cobra Zip Line TrolleyAs low as $242.00The "COBRA" cable pulley zip line trolley represents the most advanced design work using state of the art engineering techniques to build the safest and finest zip line trolley for the ropes course industry. Learn More
-
Maillon Rapid: Quick LinkAs low as $4.45Mailion Rapid Links (aka "Rapides" or "Quick-Links") are steel screw-links designed for fastening lengths of chain together on ropes courses and zip lining. They provide critical connections for trolleys, balay devices, cables and cable hardware on a zip line. Learn More
-
Beam Clamps: I-Beam ClampsAs low as $78.00They fit securely on a wide range of flange widths and beam sizes, with a built-in suspension bar that provides for close mounting. The clamp jaw design reduces flange stress by distributing the load away from the flange edge. Learn More
-
Petzl Express SlingAs low as $7.14Petzl Express Sling, The ergonomic shape of the EXPRESS webbing offers excellent grip when working a route. The STRING allows the carabiner to be held in position and protects the webbing from wear. Learn More
-
Round Washers: galvanized washersAs low as $0.30Used as spacers or supports under screw or bolt heads. Our washers are heat treated galvanized. Learn More
-
Rope Thimbles:As low as $11.50Rope thimbles protect the rope from wear whenever you have a fixed loop in the end of the rope, whether the rope is tied, spliced, or swaged. Learn More
-
Lag Screws: Lag BoltsAs low as $1.60Lag Screw Lag Bolt - Galvanized, Typically used for LEAP anchors, deck constuction for zip lines and ropes courses. Hot Dipped Galvanized; Hex Head Lag Screw. 5/8" x 6" lags or 5/8" x 8" lags are recommended for Leap/Lead/Bolt hanger anchors where through bolts are not required Learn More
-
Edelrid HMS Strike Screw 5 Pack$65.70Very compact and lightweight HMS carabiner. Ideal for alpine climbing. Learn More
-
Thimbles: Stainless Steel ThimblesAs low as $1.20Stainless Steel Thimbles, When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More
-
Head Rush Belay Gate - Triangle$99.00
A simple way to reinforce the proper use of auto belay devices and minimize risk from climbing error.
Learn More -
CHANCE® 6449 Guy Clamp, 1/4 to 7/16 in Strand, 1/2 in Clamping Bolt, 4 in L x 1.56 in W, Steel$29.95
Learn MoreWidth: 1.56 in Strand Size: 1/4 to 7/16 in Specifications: 100 ft-lb Minimum Bolt Torque Finish: Hot Dipped Galvanized Length: 4 in Material: Steel Clamping Bolt Size: 1/2 in Suitable For Use With: Loop Type Guy Dead End Order Interval: 1 Vendor SKU: 6449 Standard & Approvals: ARRA Compliant|Buy American Act Compliant|ASTM A153 Manufacturer: Hubbell Includes: (3) Bolts Brand: CHANCE® Features & Benefits: - Parallel grooves trap strand tightly without marring
- Each bolt has a shoulder to prevent turning while tightening
-
2 3/4 Snap Shackle - Quick Release with no Swivel$137.95Snap shackles are hot drop forged from high resistance stainless steel. Only forging creates a superior steel product, by Increasing its elasticity and maximizing its internal strength. Learn More
-
CLICK-UP PLUS BELAY DEVICE WITH HMS$89.99
CLICK UP + is an innovative belay device with manual assisted-braking, designed for indoor and crag climbing. It can be used with 8.5-11mm single ropes. The CLICK UP + is compact and lightweight. Allows for the belayer to keep both hands on the rope while belaying or lowering the climber. The V-Proof System (patent pending) reduces the chance of error due to an incorrect handling of the rope when braking. CLICK UP + is supplied, and must be used together, with the specific HMS carabiner CONCEPT SGL HC. The wear-resistant anodizing and ACL system of the carabiners prevents the possibility of minor-axis cross-loading.
- Weight: 110 grams
- Rope diameter range: 8.5mm - 11mm
- CE and UIAA Certified EN15151-2:2012 type 2
Learn More -
Petzl TRAC GUIDE Zip Line Trolley$189.95Learn More
The Petzl TRAC GUIDE is a trolley designed for adventure parks. Featuring an ergonomic captive carabiner, it allows the guide to quickly install the trolley on the cable with one hand. Because the carabiner pivots, the trolley remains in position on the cable when it makes contact with the end brake of the zip line. The ends are equipped with protective impact surfaces to reduce the risk of pinched fingers, and two connector support grooves to help avoid abrasion from the cable. The JOKO and AVENTEX lanyards (sold separately) are directly integrated in the carabiner, limiting the risk of separation or loss. The carabiner’s reinforced construction provides greater resistance to damp and salty environments. Product life is extended with highly durable bearings and removable impact surfaces available as spare parts.
- Ergonomic captive carabiner allows the guide to quickly install the trolley on the cable with one hand
- Two aligned sheaves provide excellent stability on the zip line
- Because the carabiner can pivot, the trolley remains in position on the cable when it makes contact with the end brake of the zip line
- Front and rear impact surfaces limit the risk of pinched fingers
- Two positioning support grooves for the connectors limit abrasion from the cable
- JOKO or AVENTEX lanyards are directly integrated in the carabiner, limiting the risk of separating or losing the trolley/lanyard unit (Sold separately)
- Connect easily to the harness with the CARITRAC stowing accessory (included)
- Double-row ball-bearings offer optimal durability
- Carabiner with reinforced construction and hard anodization for greater resistance to damp and salty environments
- Impact surfaces optimize contact between the trolley and the end brake of the zip line
- Carabiner and impact surfaces are completely removable and available as replacement parts to extend the life of the trolley
- Also available in 5-packs
Specifications
- Cable diameter: 9 to 13 mm (may also be used on ropes)
- Material(s): Aluminum frame and carabiner, stainless steel sheave, nylon
- Maximum speed: 25 m/s
- Certification(s): CE EN 17109, CE EN 12278, UIAA
- Weight per unit: 425 g
-
Petzl Selena Harness$81.95The elastic leg loops remain adjusted and offer complete freedom of movement. The DoubleBack Light buckle on the waistbelt ensures quick and easy adjustment. Learn More
-
-
Klein Haven GripsAs low as $90.00The Klein Haven Cable Grip is designed for use when a light, compact grip is desired and where zipline or other cable damage is not a factor. Gripping pressure of the knurled jaw s applied to ¼” of zipline cable area. Learn More
-
Professional Canopy Tour Trolley: Zip Line Pulley$335.95Stainless Steel sideplates, two 2" Stainless Steel sheaves, Bearing, and Stainless Steel axle. Learn More
-
