Fully adjustable harness with a single tie-in point. The top uses the Rock&Lock buckle system that improves fit and performance. Suited for challenge courses, indoor gym climbing or as a lightweight mountaineering harness.

• Weight: 366 grams 12.4 oz
• Number of buckles: 3
• Reinforced tie in
• Drop seat
• CE and UIAA Certified

Learn More

• The Franklin seat provides more long-term comfort over the course of a long workday than hanging in a harness does.
• Excellent additon for use with accessability and universal climbing programs
• It is intended for use with Singing Rock's fall arrest or work positioning harnesses or equivelant.
• It is easy to adjust with Rock and Lock buckles.
• Wide sitting area ensures good stability and allows for comfortable hanging, as well as standing work positions.
• Three D-rings (bearing capacity 50kg) for gear suspension.
• Weight: 1650 grams/58 oz

Learn More

Petzl Rope Bucket, The Petzl Rope Bucket has a unique tapered design and thin layer of closed cell foam enable the bag to stand up by itself and stay open. Learn More

A 1" Climbing Rope and/or a Swing Rope. We make our 1" Climbing/Swing Ropes with Multiline II Rope. Multiline II Rope is strong, durable and resistant to UV rays. Our 1-1/2" Ropes are made with Combo Rope, aka poly-dac rope, which is similar to Multiline. The 1" Nitro Swing Rope also have a Pear Shaped Sling Link on the thimble to make it possible to hang them with a Rapid Link. All of these ropes have a metal thimble at one end and a back-splice at the other end.We offer multiple lengths. If you require a length other than what we have listed; please give us a call at (877) 206-8967

Learn More

A 5/8" Climbing Rope and/or a Swing Rope. We make our 5/8"Climbing/Swing Ropes with Multiline II Rope. Multiline II Rope is strong, durable and resistant to UV rays. Our 1-1/2" Ropes are made with Combo Rope, aka poly-dac rope, which is similar to Multiline. All of these ropes have a metal thimble at one end and a back-splice at the other end.We offer multiple lengths. If you require a length other than what we have listed; please give us a call at (877) 206-8967

Learn More

Fully adjustable full body harness intended for rope courses and adventure parks.

• CE 1019, EN12277, EN161
• front attachment point for belaying and rappeling according to EN 12277 type C
• waist belt and the leg loops without the padding enables to put the harness to every person
• rear steel D-ring with a bearing capacity of 15 kN according EN 361
• waist belt, shoulder straps and the leg loops are easily adjustable with easy lock buckles
• red webbing strap stitched into the buckles simplify handling with them
• all steel components are finished with E-coating technology for higher corrosion resistance
• left leg loop with red color helps to put the harness on
• waist belt webbing is in red as well for easier orientation in the harness
• dorsal plastic plate with different color according the size of the harness (S – yellow, UNI – red)
• construction ensures long-time operation and efficiency (easy releasing and fastening even when dirty and tough webbing)
• Rear dorsal plate for easy size identification. Yellow = Small. Red = Universal Sizing
• Weight: 1050g
• Size: S (110-150cm/43.3in -59in)/UNI (150cm-200cm/59in-79in)

Learn More

The Cadillac is versatile enough to be used on big walls,zip line, but shines brightest on multi pitch and traditional routes. Constructed wide for comfort, the Cadillac incorporates an inner waist belt layer that spreads forces over 2.7 times more area Learn More

This professional heavy-duty cutter cuts and fuses ends of polyester and nylon ropes and web quickly. Learn More

The Head Rush Gorilla Rope is specially designed to work as a reduction line for zipSTOP zipline braking system. Brings high strength, a long life span, and minimal stretch to your zipline runs. Learn More

Looking to enhance your program offerings with some specialized equipment? ESI offers three different universal accessibility kits that come complete with a variety of equipment that will help serve the needs of climbers who need additional support. 

 

The UAK-1 comes complete with the following:

If you need additional components for a larger course, ask us about the UAK-2 and UAK-3.

 

• Misty Mountain Easy Seat - a specialized rigid yet padded seat that has an integrated rated harness system allowing lower body support without sacrificing upper body mobility.

 

• Handlebar Ascender (Wellman pull-up bar or similar)  - a traditional ascender mechanism that will grab the rope with the integrated cam while also providing a variety of hand hold options including the built in handlebars.
  
• 1M Mechanical Advantage System (Petzl JAG or similar) - this compact system provides mechanical advantage at your fingertips when climbing at height and needing assistance transferring from one cable to the other. 
  
  
• Trolley w/ anti-rollback cam (ISC Zippy or similar) - this trolley allows for smooth forward movement on a course and option to sit in the system and take a break without losing forward momentum.
  
  
• Bosun chair (Petzl Podium or similar) - a rigid chair that is stowed out of the way on the climber and dropped into position at any point along the climb as an extra seat providing quick lower body support and resting spot.
  
  
• ISC R-ALF Pulley System - this system creates a 5:1 mechanical advantage with integrated locking hub option for those climbers who need assistance ascending vertically into a course. It includes everything needed for the full system including the R-ALF hub, two double pulleys, rope, carabiners and a handy storage bag.

Learn More

CMC Rescue's All-Weather Rope Log contains 20 rope log forms on heavy, Rite-in-the-Rain paper. Ample space is provided to document critical lifeline information and log use and inspection. Learn More

CMC now offers the standard utility scissors with titanium bonded blades. Using a patented process, titanium is bonded to a stainless steel core to produce a sharper, more corrosion resistant, longer lasting edge. Learn More

Rope Washer by CMI - The unique flow pattern created by CMI's exclusive ducting creates a spiraling, multi-jetting flow pattern that lifts dirt and contaminants out of rope better than conventional designs. Constructed from tough PVC, CMI's rope washer attaches to any standard spigot or garden hose. Learn More

Rock Exotica Swivel Ropes Course Zip Line Carabiners , The SwivaBiner features a high-strength bushing that will withstand greater abuse than a bearing. The SwivaBiner is designed to re-orient a load, and not provide high-speed rotation. Learn More

Waterbased formula is more environmentally friendly and easy to clean up. Whip-End Dip was designed to seal the end of a rope to prevent fraying or unraveling. Learn More

This electric handheld unit cuts and fuses the ends of polyester and nylon ropes and webbing. Easy to use and long lasting blades. heats up when trigger is pulled and cools when released. Learn More

Designed to be used in conjunction with any seat harness. The Challenge Chest harness increases user safety by reducing the likelihood of an upside down fall. The 3 buckle system allows the harness to be adjusted quickly and easily.

• Weight: 350 grams
• Number of buckles: 3
• CE and UIAA Certified

Learn More

Slices rope like Butter! This fast and efficient unit has a hot blade which cleanly cuts through rope and webbing in seconds. Learn More

Dry treatment makes the rope more resistant to water, dirt and abrasion; handling, grip and other characteristics are retained longer in cold, wet conditions. Learn More

The Easy Seat Accessability Harness offers participants with sufficient upper body strength and additional freedom of movement while still providing a padded seat and integral harness for security. The Easy Seat is excellent for rigging a 4 to 1 ascending system. It offers a firm, padded support of the lower body and complete upper body freedom. The participant is secured to the harness via leg loops, waist and chest.

Learn More

A great harness for group users such as clubs, schools and camps. A great value in a fully adjustable harness. Easily adjustable harness with a single tie in point.

• Weight: 400 grams
• Number of buckles: 3
• Gear loops: 0
• Single reinforced tie in
• Universal size fits up to 47" waist.
• CE and UIAA Certified

Learn More

A fully adjustable, full body harness for work positioning and fall-arrest. Padded hip belt and leg loops for comfort. Available in Easy Lock buckle or Speed Lock buckles. NFPA version includes Speed Lock buckles and all steel components and attachment points.

Learn More

UltraSonic Finish: the core and the sheath are bonded together at the rope ends by an ultrasonic process called UltraSonic Finish; gives greater durability and avoids frayed ends. Learn More

Our enhancements include adjustable spring tension, a reversible cable and pin, and "mud vents" to help prevent dirt caked on rope from degrading ascender performance. Learn More

This is a simplified version of the PANDION without a equipment loop for climbing rental programs, zipline programs etc. Learn More

Full body kids harness with innovative triangle webbing-separator on the back that makes this harness easy to put on correctly. Front attachment point is reinforced and the fast buckle adjustment is easy to fit to the child. Fits kids up to 130 cm or 51 inches in height.

• Number of buckles: 2
• Weight: 350 grams
• Gear loops: 0
• Reinforced tie in
• CE Certified

Learn More

Learn More

Learn More

Durable, easy-to-use full-body harness for adventure parks

Learn More

Fully adjustable harness for work positioning withcontinuous adjustable webbing, SPEED buckles, padded wide waist belt, anatomicleg loops and shoulder straps.

• super comfortable wide waist belt padding provides maximum comfort when working at height
• strength webbing on the waist belt is stitched in the way that at normal working situation the body weight is absorbed by the padding only
• reflective strap and printing on the waist belt and a reflective strap on the shoulder padding increase the visibility in dark working conditions (the black version of the harness is not equipped with the reflective elements)
• anatomic leg loops and waist belt are covered with strong PES fabric providing high abrasion resistance
• standard easy lock buckles enable smooth adjustment
• narrowed padding and webbing on the shoulder straps in a neck area enhance comfortable work
• leg loops connection straps made from durable PES webbing for better abrasion resistance
• front and back attachment points for fall arrest according to EN 361 marked with additional “A“ marking
• flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus
• front lower attachment point for descender placement or work positioning according to EN 813
• 2 side attachment points for work positioning according to EN 358
• 4 ergonomic braided gear loops with a bearing capacity of 5 kg
• heavier items up to 35 kg can be attached to the webbing on the waist belt
• additional loops on the waist belt and leg loops with a bearing capacity of 5 kg offer additional space for the gear and better gear organization
• wide elastic band at left shoulder strap for the gear attachment (e.g. transmitter)
• slots at the waist belt for Porter tool holder to carry your industrial tools
• shoulder attachment points for confined space rescue according to EN 1497
• chest ascender smart fixation system (using an additional maillon), works best with Cam Clean
• all steel components finished with E-coating for higher corrosion resistance
• identification and methodical label
• Weight: 177g, 62.68oz
• Max Rated Load: 150 kg
• Certifications: EN 358, EN 361, EN 813, EN 1497, CE 1019

Learn More

Kong Indiana Full II is a full body harness for adventure parks. The upper straps keep the body inside the harness in case of rollover, increasing safety.

• Leg loops with different colors allow easy dressing
• Easy and intuitive size regulation
• Universal size that fits both adults and children
• Wide aluminum ventral attachment point
• Aluminum dorsal attachment point
• Fits Waist Size: Universal
• Leg Size: Universal
• Standards & Certifications: EN 12277 Type C

Learn More

A step up in strength and durability from the RP101 rope pulley. Black Anodized Aluminum sideplates, 2 3/8" Aluminum sheave, Bushing, and Stainless Steel axle. A great all around rope pulley. Learn More

Special thermal treatment stabilizes the core strands and improves consistency; offers excellent grip and consistent handling over time. Learn More

The Felco C16 Wire Cutter has a capacity of 5/8 in. diameter and smaller. This is the GO-TO zipline cable cutter in the industry. Felco cutters keep cutting for years longer than other cable cutters. Learn More

EverFlex treatment: special thermal treatment stabilizes the core strands and improves consistency; offers excellent grip and consistent handling over time. Learn More

Red Anodized Aluminum sideplates, 2 3/8" Glass-filled Celcon sheave, n/a, and Stainless Steel axle. The original rope pulley! Durable design, great action, light weight and easy to use. Learn More