Back to Top
Search results for: 'steel captive eye carabiner'
- Did you mean
- stapl captive eye carabiner
- sleev captive eye carabiner
-
CMI RP117 2" Stainless Steel Service Line Pulley$66.50Stainless steel sideplates, 2" aluminum sheave, needle bearing, and stainless steel axle.
Learn MoreMBS
Rope Capacity
Size
Weight
Efficiency
8000lbs
1/2"
5x2.5in
0.5lb
90.6%
-
Robertson Rope Belay SpoolAs low as $114.00This manual rescue belay can be used as a self belay or with a belayer. The side plates and drum are made from heat treated 6061 T6 Aluminum while the two stainless steel pins keep the rope seperated as it is reaved around the drum. Drum is Aircraft Hard Anodized for extended wear which cost more but makes for a superior product. Learn More
-
Ropewalker Ascenders: Rope AscendersAs low as $103.95Our enhancements include adjustable spring tension, a reversible cable and pin, and "mud vents" to help prevent dirt caked on rope from degrading ascender performance. Learn More
-
Yates Adjustable Daisy Strap$30.00Yates Adjustable Daisy Strap, The buckle axle is riveted for added security and strength. Contoured webbing eye at carabiner clip attachment end. This configuration allows the strap more rotation, thus reducing jamming in corners. Learn More
-
CHANCE® 6449 Guy Clamp, 1/4 to 7/16 in Strand, 1/2 in Clamping Bolt, 4 in L x 1.56 in W, Steel$29.95
Learn MoreWidth: 1.56 in Strand Size: 1/4 to 7/16 in Specifications: 100 ft-lb Minimum Bolt Torque Finish: Hot Dipped Galvanized Length: 4 in Material: Steel Clamping Bolt Size: 1/2 in Suitable For Use With: Loop Type Guy Dead End Order Interval: 1 Vendor SKU: 6449 Standard & Approvals: ARRA Compliant|Buy American Act Compliant|ASTM A153 Manufacturer: Hubbell Includes: (3) Bolts Brand: CHANCE® Features & Benefits: - Parallel grooves trap strand tightly without marring
- Each bolt has a shoulder to prevent turning while tightening
-
Petzl AM'D Pin-Lock$37.14The Am'D PIN-LOCK asymmetrical aluminum carabiner is designed for use with groups. It secures the connection of the user thanks to its PIN-LOCK system, which can only be opened by the operator with a specific unlocking tool. Learn More
-
Petzl Rollclip$47.94Pulley carabiner, available in versions with or without TRIACT-LOCK locking system. Learn More
-
-7%Snap Hook - Industrial Snap HooksSpecial Price $14.00 Regular Price $15.00Snap hooks are recommended as they are easier for small hands, more ergonomically friendly and are permanently attached to the lobster claws. Learn More
-
CMI Trolley Brake BlockAs low as $95.05CMI Trolley Brake Block, The striking surface is crafted from ultra-high molecular weight polyethylene, noted for it's exceptional wear resistance. Steel hardware and a galvanized eye bolt round out the package Learn More
-
NUTS: for 5/8" - 3/4" Eyebolts, Machine BoltsAs low as $2.00Forged Nut Eye bolts are the backbone of ropes challenge course and zip line construction. Zip line and other cables are terminated to the eye bolt around a thimble to prevent cable deformation at the turn back. Learn More
-
Square Curved and Square Flat WashersAs low as $2.00Square Curved Washers for nut eye bolts and machine bolts. Galvanized Square washers designed for outdoor use in challenge courses, zip lines and other outdoor applications. Learn More
-
Fire Cracker Ladder$14.40
Firecracker Ladders are made with ¾” polydac rope with 12” center notched 1 ¼” diam hardwood dowels spaced and lashed at 18” intervals. Very challenging. Metal eye top and rope eye bottom.
Sold by: Linear Ft.
Learn More -
-7%EDELWEISS SWIVEL SWRSpecial Price $42.95 Regular Price $45.95
Compact and light forged aluminum eye to eye swivel with bearings for smooth rotation under load. Will accommodate two carabineers in each eye.
- Dimensions: 83mm x 39mm/3.26in x 1.5in
- Weight: 88g/3.1oz
- Max. Breaking Strength: 22kN
- Working Load Limit: 4kN
- CE - EN354
-
Petzl TRAC GUIDE Zip Line Trolley$189.95Learn More
The Petzl TRAC GUIDE is a trolley designed for adventure parks. Featuring an ergonomic captive carabiner, it allows the guide to quickly install the trolley on the cable with one hand. Because the carabiner pivots, the trolley remains in position on the cable when it makes contact with the end brake of the zip line. The ends are equipped with protective impact surfaces to reduce the risk of pinched fingers, and two connector support grooves to help avoid abrasion from the cable. The JOKO and AVENTEX lanyards (sold separately) are directly integrated in the carabiner, limiting the risk of separation or loss. The carabiner’s reinforced construction provides greater resistance to damp and salty environments. Product life is extended with highly durable bearings and removable impact surfaces available as spare parts.
- Ergonomic captive carabiner allows the guide to quickly install the trolley on the cable with one hand
- Two aligned sheaves provide excellent stability on the zip line
- Because the carabiner can pivot, the trolley remains in position on the cable when it makes contact with the end brake of the zip line
- Front and rear impact surfaces limit the risk of pinched fingers
- Two positioning support grooves for the connectors limit abrasion from the cable
- JOKO or AVENTEX lanyards are directly integrated in the carabiner, limiting the risk of separating or losing the trolley/lanyard unit (Sold separately)
- Connect easily to the harness with the CARITRAC stowing accessory (included)
- Double-row ball-bearings offer optimal durability
- Carabiner with reinforced construction and hard anodization for greater resistance to damp and salty environments
- Impact surfaces optimize contact between the trolley and the end brake of the zip line
- Carabiner and impact surfaces are completely removable and available as replacement parts to extend the life of the trolley
- Also available in 5-packs
Specifications
- Cable diameter: 9 to 13 mm (may also be used on ropes)
- Material(s): Aluminum frame and carabiner, stainless steel sheave, nylon
- Maximum speed: 25 m/s
- Certification(s): CE EN 17109, CE EN 12278, UIAA
- Weight per unit: 425 g
-
Petzl Trac Plus Zip Line Trolley$191.94TRAC PLUS Zip Line Trolley, They cannot be dropped, thanks to the VERTIGO WIRE-LOCK carabiner, simplifying their functionality Learn More
-
Large D Twistlock -ANSI$23.07This Large Twistlock carabiner has a key gate opening for smooth clips and unclips. No more snagging on ziplining harnesses, cables, gear or bolts. Learn More
-
Sport Rack - Rappelling Descender$110.00CMI Sport Racks are formed from 5/16" diameter stainless steel and are fitted with oversize stainless steel bars. We chose stainless steel over aluminum because of its "wearever" qualities. Learn More
-
Petzl Vrillee Hanger$7.14The Petzl Vrillee hanger is for direct aid. It holds the carabiner parallel to the rock face allowing the rope to run easily through the carabiner. With 8mm bolt Learn More
-
Edelrid HMS Strike Slider 5 Pack$119.70Innovative HMS carabiner with automatic locking mechanism. Learn More
-
Edelrid Mega Jul Belay Kit$77.94The Mega Jul Belay Kit with our Mega Jul belay device and the HMS Strike FG Carabiner. Learn More
-
Petzl Basic Ascender$83.94Petzl Basic Ascender, The BASIC is a compact ascender that offers excellent grip for rope ascents. The lower attachment hole is large enough to hold the carabiners for the lanyard and the footloop. Learn More
-
Edelrid HMS Strike Screw 5 Pack$89.70Very compact and lightweight HMS carabiner. Ideal for alpine climbing. Learn More
-
Petzl Kit Corax$119.94Climbing kit containing CORAX harness, belay system with Am'D carabiner and VERSO belay-rappel device, BANDI chalkbag and POWER BALL chalkball Learn More
-
PETZL FREINO$59.94It provides increased friction for single ropes when rappelling or lowering, without extra gear or the need to open the carabiner Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Hook-Hook 3/4" x 12"$27.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Jaw 3/4" x 12"$27.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Hook 3/4" x 12"$27.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Hook-Hook 5/8" x 6"$15.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Jaw 5/8" x 6"$15.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Hook 5/8" x 6"$15.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Hook-Hook 5/8" x 12"$18.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Jaw 5/8" x 12"$18.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Hook 5/8" x 12"$18.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Hook-Hook 3/4" x 6"$24.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Jaw 3/4" x 6"$24.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Hook 3/4" x 6"$24.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
