Search results for: 'yates figure 8 chest harness 50'
- Machine BoltsAs low as $4.95Our Machine Bolts are hot dip galvanized, forged steel, quenched and tempered and are sold with hex nuts attached. Round or square washers and lock washers can be added separately. Learn More
- Tarzan Economic Universal Full Body Harness$129.95
Fully adjustable full body harness intended for rope courses and adventure parks.
- CE 1019, EN12277, EN161
- front attachment point for belaying and rappeling according to EN 12277 type C
- waist belt and the leg loops without the padding enables to put the harness to every person
- rear steel D-ring with a bearing capacity of 15 kN according EN 361
- waist belt, shoulder straps and the leg loops are easily adjustable with easy lock buckles
- red webbing strap stitched into the buckles simplify handling with them
- all steel components are finished with E-coating technology for higher corrosion resistance
- left leg loop with red color helps to put the harness on
- waist belt webbing is in red as well for easier orientation in the harness
- dorsal plastic plate with different color according the size of the harness (S – yellow, UNI – red)
- construction ensures long-time operation and efficiency (easy releasing and fastening even when dirty and tough webbing)
- Rear dorsal plate for easy size identification. Yellow = Small. Red = Universal Sizing
- Weight: 1050g
- Size: S (110-150cm/43.3in -59in)/UNI (150cm-200cm/59in-79in)
- Mio Cable Grab for 3/8" Wire Rope$214.00
atented cable grabs are designed to provide fall protection for workers ascending or descending from a variety of ladders or vertical structures. The stainless steel cable grab is easily removed or repositioned along a cable. If a fall occurs, the cable grab is designed to immediately lock onto the cable and prevent a free fall. Sold with an integrated shock absorber. Users should be familiar with all warnings and instructions and receive training in the proper use of this device. Product Specs: Universal design Auto traveling operation Durable, lightweight stainless steel design Meets applicable OSHA Standards and ANSI requirements. Recommended lifelines 3/8″ diameter stainless steel or galvanized 7×19 aircraft cable (non-lubed) with minimum tensile strength of 8,000 lbs.
MUST be attached to worker’s harness using ANSI rated autolocking carabiner (NOT included)
Learn More - Franklin Work Positioning Harness$165.00
- The Franklin seat provides more long-term comfort over the course of a long workday than hanging in a harness does.
- Excellent additon for use with accessability and universal climbing programs
- It is intended for use with Singing Rock's fall arrest or work positioning harnesses or equivelant.
- It is easy to adjust with Rock and Lock buckles.
- Wide sitting area ensures good stability and allows for comfortable hanging, as well as standing work positions.
- Three D-rings (bearing capacity 50kg) for gear suspension.
- Weight: 1650 grams/58 oz
- Kask Super Plasma Helmets$162.00The Kask Super Plasma Rescue Helmets have been specifically designed for professional rescue and work-at-height applications. Learn More
- SIMBA Full body adjustable Childs Harness$68.95Because small children do not have well-defined hips for a waist belt to latch onto, the full body design is necessary for safety on any zipline/ropes course. Learn More
- Thimble Eye BoltsAs low as $8.40Thimbleye® bolts are forged in two styles, straight and bent at a 45° angle. The broad radius of the eye provides an excellent attachment point to dead-end or guy messenger wire, guy strand or formed wire grips. Learn More
- Petzl Swan Easy-Fit Full Body Harness$169.95
Durable, easy-to-use full-body harness for adventure parks
SWAN® EASYFIT STEEL is a full-body harness designed for adventure parks. Its straps are color-coded to make donning easier. It is equipped with a FAST LT PIN-LOCK buckle to secure harness fastening; the PIN-LOCK locking system can only be opened by the guide with a special tool. The raised position of the connection point limits the risk of the client flipping. Its durability makes for easy maintenance and extended product life. Its single size and identification areas simplify equipment inventory management.
Detailed description
- Very easy to use full-body harness designed for adventure parks:
- Easy to install on the client, with FAST buckles at the rear of the harness
- Right/left color coding makes it easier to give donning instructions to clients
- Self-locking DOUBLEBACK buckles for quick and easy adjustment
- Excellent grip on webbing ends facilitates adjustment, even with gloves - Protects the client during progression:
- FAST LT PIN-LOCK waistbelt buckle can only be unlocked with a special tool, limiting the risk of the participant opening the buckle
- Wide ventral attachment point is color-coded green, making it easier to install the JOKO or AVENTEX lanyards and allowing for a quick visual check; the raised position of the attachment point limits the risk of the client flipping
- Anatomical design is close-fitting yet allows optimal freedom of movement
- Two side equipment loops make it easy to carry lanyard connectors - Excellent durability for easy maintenance and extended product life:
- Durable metal attachment point
- Webbing designed for intensive use and smooth adjustment - Easy equipment management for guide or monitor:
- Single size, adapts to most body types
- Marking area on the outside of the harness for easy identification when stored
- Identification panel integrated in the harness to track the equipment throughout its lifespan
- Easy to clean - Accessories to adapt the harness according to need:
- Leg loop foam for greater comfort when hanging for long periods of time
- CARITRAC stowing accessory to easily stow TRAC trolleys - Comes with an unlocking tool for the FAST LT PIN-LOCK buckle which can be easily carried on the guide’s harness
- Available individually or in packs of five
Specifications
- Material(s): Polyester webbing, aluminum attachment point, steel buckles, nylon
- Certification(s): CE EN 12277 type A, UIAA
- Weight per unit: 1125 g
- Waist belt: <120 cm
- Leg loops: <75 cm
- Stature: <200 cm
- Very easy to use full-body harness designed for adventure parks:
- Lag Screws: Lag BoltsAs low as $1.60Lag Screw Lag Bolt - Galvanized, Typically used for LEAP anchors, deck constuction for zip lines and ropes courses. Hot Dipped Galvanized; Hex Head Lag Screw. 5/8" x 6" lags or 5/8" x 8" lags are recommended for Leap/Lead/Bolt hanger anchors where through bolts are not required Learn More
- Swaging Tools - 1/4" - 3/8" Cable CrimperAs low as $174.00The 1/4, 5/16, and 3/8 Swaging Tools are designed for crimping copper and aluminum oval sleeves and stop sleeves on zip lines, life lines,ropes course elements. Learn More
- Kong Indiana Full II Full Body Harness - Universal Size$196.79
Kong Indiana Full II is a full body harness for adventure parks. The upper straps keep the body inside the harness in case of rollover, increasing safety.
- Leg loops with different colors allow easy dressing
- Easy and intuitive size regulation
- Universal size that fits both adults and children
- Wide aluminum ventral attachment point
- Aluminum dorsal attachment point
- Fits Waist Size: Universal
- Leg Size: Universal
- Standards & Certifications: EN 12277 Type C
- Kask SP Hi-Viz Helmet$174.00The Kask Super Plasma Hi-Vix Helmets have been specifically designed for professional rescue and work-at-height applications. Learn More
- CMI UltrabrakeAs low as $188.00CMI Ultrabrake, Designed for hard use and maximum UV resistance, the material has a low friction coefficient and is self-lubricating with a non-adherent surface. Learn More
- Liberty Mountain Guide HarnessSpecial Price $38.95 Regular Price $42.95
A proven winner for the ropes course. Double-back buckles on the legs and waist.
One Size Fits Most
Learn More - Robertson Adjustable Lobster Claws$76.20These are the basic model with NO snap hooks or Zorber. These are only appropriate for clipping in to protection with some dynamic load absorbing features like rope or fairly slack cable such as a belay cable on a high ropes course or zipline. Learn More
- First Aid Bag for Harnesses$23.95
Compact and light first aid bag with reflective zippers for increased visibility and easy access. The inside is designed with different size compartments and zippered mesh pocket. Velcro attachment loops allow easy and safe attachment to a harness or backpack. Includes an emergency whistle. First Aid contents are not included.
- Size: 13 cm x 10 cm x 5 cm
- 5/8 NUT EYE BOLTSAs low as $6.95Nut Eye bolts are the main bolts used in ropes challenge course and zip line construction. Zipline and other cables are terminated to the eye bolt around a thimble to prevent cable deformation at the turn back. Learn More
- Edelrid Jay II Harness$71.94The Jay is the perfect all-rounder with adjustable leg loops for all types of climbing. Learn More
- Zip Line - Super Swage Compacted Cable / Wire Rope$2.94
Zip Line Super Swaged Compacted Cable / Wire Rope - Zip Line Super cable aka Swaged galvanized cable or compacted wire rope is now available! This incredible cable has at least five times the life of ordinary cable, 25% more strength, 10% faster, and runs 50-70% quieter than traditional cable! This is the wire rope to use for a smoth zipline ride.
Learn More - NUTS: for 5/8" - 3/4" Eyebolts, Machine BoltsAs low as $2.00Forged Nut Eye bolts are the backbone of ropes challenge course and zip line construction. Zip line and other cables are terminated to the eye bolt around a thimble to prevent cable deformation at the turn back. Learn More
- Petzl Nest$3,599.94The NEST litter was developed in partnership with the French national caving rescue organization. It allows a victim to be transported horizontally, vertically or at an angle. Learn More
- Turnbuckles: Cable Zip Line Turnbuckle : Eye-Eye 5/8" x 6"$15.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
- Turnbuckles: Cable Zip Line Turnbuckle : Hook-Hook 5/8" x 6"$15.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
- Turnbuckles: Cable Zip Line Turnbuckle : Eye-Hook 5/8" x 6"$15.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
- Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Jaw 5/8" x 6"$15.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
- Turnbuckles: Cable Zip Line Turnbuckle : Eye-Jaw 5/8" x 6"$15.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
- Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Hook 5/8" x 6"$15.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
- Turnbuckles: Cable Zip Line Turnbuckle : Eye-Eye 5/8" x 12"$18.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
- Turnbuckles: Cable Zip Line Turnbuckle : Hook-Hook 5/8" x 12"$18.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
- Turnbuckles: Cable Zip Line Turnbuckle : Eye-Hook 5/8" x 12"$18.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
- Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Jaw 5/8" x 12"$18.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
- Turnbuckles: Cable Zip Line Turnbuckle : Eye-Jaw 5/8" x 12"$18.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
- Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Hook 5/8" x 12"$18.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
- Turnbuckles: Cable Zip Line Turnbuckle : Eye-Eye 5/8" x 9"$16.95Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
- Turnbuckles: Cable Zip Line Turnbuckle : Eye-Hook 5/8" x 9"$16.95Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More