Search results for: 'abl figure 8 rappel device'
- ROPE: Three Strand Polydacron - Import RopeAs low as $1.10
3 Strand Import Polydacron Rope combines filament and staple/spun polyester wrapped around a polyolefin core to produce a rope with considerably lower stretch, better wear life and superior handling characteristics.
- Color: White/Red
- Material: Polyester Blend
- Construction: 3 Strand
- Easy to splice
- Ideal for Element Construction
- Wire Rope - Zipline Cable Copper Ferrule -3/8"$5.00Ferrules must be properly crimped to achieve holding strength. Properly swaged ferrules can hold 90% of cable strength. Two ferrules are required for life support and ziplining applications (ACCT Standards). Learn More
- Y Tail - Instructor Ropes Course Lanyard with Shock Pack$98.65
Y Tail - Instructor Ropes Course Lanyard with Shock Pack is made from high quality US manufactured 1/2" black Nylon rope. Each lanyard has a shock pack and tripple locking steel carabiner for attachemnt to the harness, and ANSI rated load limiting device (shock pack) and two ANSI rated double locking snap hooks. Each lanyard is adjustable from 4'6" to 6' 4" .
Learn More - Petzl Corax HarnessAs low as $71.94The CORAX is the versatile harness par excellence: easy to use and comfortable, it is designed for rock climbing, mountaineering or via ferrata. Learn More
- Head Rush TRUBLUE XL Side Cover Assembly$100.00Keep your Head Rush TRUBLUE XL looking newer, longer with a replacement Side Cover Assembly. This cover is easy to replace in the field—no tools required. Learn More
- Yates Rescue Load Limiter$56.40Effectively reduces peak loads on an anchor in rescue and rigging system. Learn More
- Head Rush zipSTOP Brake Trolley with CatchAs low as $288.00The Head Rush Brake Trolley is a replacement for the brake trolley that came with your zipSTOP Zip Line Brake. Learn More
- Petzl SwivelAs low as $71.95Petzl Swivel, Positioned between the rope and the load, the ball-bearing Swivel S allows the load to turn without twisting the rope. Learn More
- Yates Adjustable Daisy Strap W/ Screamer$48.00Yates Adjustable Daisy Strap W/ Screamer, Designed to reduce shock loading during aid climbing situations where protection fails result in a direct fall onto the lower daisy. Learn More
- Tarzan Economic Universal Full Body Harness$129.95
Fully adjustable full body harness intended for rope courses and adventure parks.
- CE 1019, EN12277, EN161
- front attachment point for belaying and rappeling according to EN 12277 type C
- waist belt and the leg loops without the padding enables to put the harness to every person
- rear steel D-ring with a bearing capacity of 15 kN according EN 361
- waist belt, shoulder straps and the leg loops are easily adjustable with easy lock buckles
- red webbing strap stitched into the buckles simplify handling with them
- all steel components are finished with E-coating technology for higher corrosion resistance
- left leg loop with red color helps to put the harness on
- waist belt webbing is in red as well for easier orientation in the harness
- dorsal plastic plate with different color according the size of the harness (S – yellow, UNI – red)
- construction ensures long-time operation and efficiency (easy releasing and fastening even when dirty and tough webbing)
- Rear dorsal plate for easy size identification. Yellow = Small. Red = Universal Sizing
- Weight: 1050g
- Size: S (110-150cm/43.3in -59in)/UNI (150cm-200cm/59in-79in)
- CMI Micro Haul Pulleys$190.34The perfect size for light and tower rescues. Fits ropes from 8mm to 1/2". Features built in safety cam for use in "jigger" or "short haul" systems. Use with CMI micro single or double pulley 3:1 or 4:1 mechanical advantage systems. Features a centered bronze bushing. Strength: 7000 lbs. The CMI Single Micro Hauler is 154 mm. tall, 53 mm wide, and 40 mm. thick and 19 g. Learn More
- Petzl Nest$3,599.94The NEST litter was developed in partnership with the French national caving rescue organization. It allows a victim to be transported horizontally, vertically or at an angle. Learn More
- Petzl Attache Carabiner$23.07Thanks to its compact shape and SCREW-LOCK locking system, the ATTACHE is designed for multiple uses related to belaying: connecting a belay system to a harness, belaying with a Munter hitch... Learn More
- Teufelberger (New England) KM III 7/16"$196.80A superior handling rescue rope,Teufelberger (New England) Ropes KM III static, kernmantle rope features a composite construction of nylon and polyester fibers. Learn More
- CMI EXPEDITION ASCENDERAs low as $107.96CMI EXPEDITION ASCENDER, The Expedition Ascender is a perfect choice for big wall or mountaineering endeavors. Engineered for comfort, the handle opening is extra wide to accommodate gloved hands. Works with 7mm-12mm ropes. Sold individually. Learn More
- HAULERBINER RESCUE KIT 300 CMSpecial Price $354.00 Regular Price $391.95
The HaulerBiner Compact Rescue Kit is a lightweight, compact and simple to use/deploy device. The HaulerBiner is fully rated for lifting people. The HaulerBiner has three pulley wheels incorporated into each carabiner, creating a compact and lightweight 6:1 or 7:1 (theoretical) mechanical advantage system. The HaulerBiner also has a purpose-designed progress capture cam with, an ‘on/off’ position. The HaulerBiner utilises purpose-developed 6mm (1/4") rope, for strength and easy handling/best grip. The kit is supplied in a two-pouch bag, for easy deployment. The HaulerBiner is load rated to 140kg (310lbs) but it has an MBS of at least 16kN/3500lbs tested as a complete system. The length of the system, when fully contracted is only 32cm (12"). EN 12278, EN 567 certifications
Learn More - Petzl Pro Pulley$89.94Openable even when attached to the anchor, the PRO pulley is designed for maximum simplicity when setting up hauling or load deviation systems. Learn More
- Yates Ice Screams (605)$32.40Shock absorbing sling designed to reduce peak loads in any climbing system!! Learn More
- Cable Clamps: Drop Forged Cable ClampsAs low as $1.75Great for ropes courses, zip line, high elements, and low ropes challenge courses. Cable Clamps, sometimes called cable stops or cable clips, are tools that are used to clamp down on wire rope commonly used in industrial applications as well as in zip lining and ropes course construction. Learn More
- Petzl Contact Dynamic RopeAs low as $257.94Special thermal treatment stabilizes the core strands and improves consistency; offers excellent grip and consistent handling over time. Learn More
- Petzl P42 CaritoolAs low as $12.95Petzl P42 Caritool, A carabiner-shaped tool holder designed to organize gear attached to a harness. Ice-screws, pitons, cams, as well as small tools, can be arranged and accessed single-handedly Learn More
- Petzl Volta Dynamic RopeAs low as $149.94Dry treatment makes the rope more resistant to water, dirt and abrasion; handling, grip and other characteristics are retained longer in cold, wet conditions. Learn More
- CMI ROPE PULLEY RP104$117.60High strength in a compact design. Stainless Steel sideplates, 2 3/8" Aluminum sheave, Bearing, and Stainless Steel axle. Learn More
- RC-800 Wire Rope Cutter$229.00The RC-800 Wire Rope Cutters are used for cutting 1/16 to 5/8 inch cable. Learn More
- CMI ROPE PULLEY RP103$91.00For hostile environments and maximum service life. Blue Anodized Aluminum sideplates, 2 3/8" Aluminum sheave, Bearing, and Stainless Steel axle. Learn More
- Petzl OK Carabiner$17.95The symmetrical aluminum OK carabiner has an oval shape that allows optimal positioning of equipment with a wide section. Its Keylock system facilitates manipulations. Learn More
- 1" Climbing Rope & Swing RopeAs low as $64.00
A 1" Climbing Rope and/or a Swing Rope. We make our 1" Climbing/Swing Ropes with Multiline II Rope. Multiline II Rope is strong, durable and resistant to UV rays. Our 1-1/2" Ropes are made with Combo Rope, aka poly-dac rope, which is similar to Multiline. The 1" Nitro Swing Rope also have a Pear Shaped Sling Link on the thimble to make it possible to hang them with a Rapid Link. All of these ropes have a metal thimble at one end and a back-splice at the other end.We offer multiple lengths. If you require a length other than what we have listed; please give us a call at (877) 206-8967
Learn More - JP Step II Pole Step / Tree Step$38.40
Just Perfect Pole Steps : JP Step II
The JP Step I and JP Step II are Pole/Tree steps and fall protection anchor in one (think integrated LEAD anchor). Installs with 5/8" x 6" lag in poles and 5/8" x 8" lag in trees for the JP I and II. The JP R uses a Specialty 4" Lag Bolt and plate that comes with it. Supports over 5,000 lbs when properly installed. A great alternative to traditional pole steps and staples. These pole/tree steps are easily installed (about one minute). They also provide great positive climbing aids for hands, feet, and safety anchors. JP Steps for trees and poles are the best looking and safest integrated step - fall protection anchor for ropes courses, challenge courses, and zip line access.
Learn More - Petzl Cheville Autoforeuse$4.74Petzl Cheville Autoforeuse 12 mm diameter for an 8 mm threaded bolt Bolt with integrated drill Learn More
- CMI Rope Pulley RP101$45.00Red Anodized Aluminum sideplates, 2 3/8" Glass-filled Celcon sheave, n/a, and Stainless Steel axle. The original rope pulley! Durable design, great action, light weight and easy to use. Learn More
- Felco C16 Wire Rope Cutter$523.20The Felco C16 Wire Cutter has a capacity of 5/8 in. diameter and smaller. This is the GO-TO zipline cable cutter in the industry. Felco cutters keep cutting for years longer than other cable cutters. Learn More
- Petzl Am'D CarabinerAs low as $18.25Petzl Am'D Carabiner - Add security to your climbing anchors with the Petzl Am'D Traict Locking Carabiner. Take your pick of Petzl's Screw-Lock, Ball-Lock, or Triact-Lock gate to perfectly match your preference. The Am'D Carabiner also has a snag-free keylock gate to assure it never snags on gear when you're building a solid anchor at the top of the pitch you just climbed. Learn More
- Turnbuckles: Cable Zip Line Turnbuckle : Eye-Eye 3/4" x 12"$27.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More