Search results for: 'facilit sing line'

Haul kit for pickoffs, making a releasable anchor, or tensioning a system, thanks to its 4:1 mechanical advantage and excellent efficiency (sheaves with sealed ball bearings). Learn More

CMI Twin Expedition Arborist Ascender, The Twin Expedition is the first single-handled dual ascender designed to meet the needs of industry leading arborist professionals. The EXPTWIN easily accommodates three rope techniques - 2:1 doubled rope technique (DdRT), 1:1 single rope technique (SRT), and 1:1 twin line ascent (DbRT). Learn More

Petzl Pantin Ascender, A big advantage for long rope ascents. With the Pantin Ascender supporting the foot, the body is held in a more upright position thus making the ascent faster and less tiring for the arms. Learn More

This rainbow para cord is ideal for lazy lines (or haul lines) on ropes courses and climbing walls, as well as general use. Kernmantle construction for high strength and low stretch. 350 lb strength rating. 1/8" (3mm).  Made in the Mexico.

Learn More

This rainbow para cord is ideal for lazy lines (or haul lines) on ropes courses and climbing walls, as well as general use. Kernmantle construction for high strength and low stretch. 350 lb strength rating. 1/8" (3mm).  Made in the Mexico.

Learn More

Multiline 3-Strand Spliced Rope Zip Line Lanyards (tethers). Plastic teardrop shaped thimble on each end.

Learn More

Stainless Steel Thimbles, When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More

Just Perfect Pole Steps : JP Step II

 

The JP Step I and JP Step II  are Pole/Tree steps and fall protection anchor in one (think integrated LEAD anchor). Installs with 5/8" x 6" lag in poles and 5/8" x 8" lag in trees for the JP I and II. The JP R uses a Specialty 4" Lag Bolt and plate that comes with it. Supports over 5,000 lbs when properly installed. A great alternative to traditional pole steps and staples.  These pole/tree steps are easily installed (about one minute). They also provide great positive climbing aids for hands, feet, and safety anchors. JP Steps for trees and poles are the best looking and safest integrated step - fall protection anchor for ropes courses, challenge courses, and zip line access.

Learn More

The Head Rush Impact Trolley Sheave Replacement Kit allows you to replace your Impact Trolley sheave assembly should they wear out or become damaged. Learn More

Head Rush FlightLine is an extreme free fall ride for theme parks, adventure parks, and carnivals that takes jumpers to heights never before dreamed. Learn More

The Impact Surface Replacement Kit allows you to replace the Impact Surface on your Impact Trolley should it wear out or become damaged. Learn More

The Head Rush TRUBLUE XL Auto Belay is fitted with a webbing that can be replaced in the field by the owner using the Replacement Webbing. Learn More

The Impact Trolley Cover Plate Replacement Kit allows you to replace the Cover Plates on your Impact Trolley should they wear, get misplaced or damaged Learn More

The Zippey Trolley is bi-directional, so there’s no wrong way to fit it. Zippey offers a one handed action with either a single or double locking mechanism for increased safety.

Zippey has a speed rating of 60mph (90kph), which is based on the use of the same high spec deep groove, double row ball bearings, as used in our Zipspeed range. The expected life of the bearings should be more than 1000 miles (1500km).

Accessories available for the Zippey Trolleys

ARC – Anti Roll Back Cam. This innovative add on solves many of the issues associated with modern zip lines. Riders who reach the egress platform can roll back out onto the line requiring staff intervention. The ARC ensures that the rider remains in position over the egress platform by camming against the zip line cable maintaining their position.

Handle Accessory – There is now an available handle accessory for the Zippey making it possible for riders to ‘steer’ into the arrival station.

Learn More

PANJI adventure park/zipline harness is a one size harness covering a very wide range of body sizes. Learn More

CIFA: 10286 Klein Tools 809-36 hammer is designed and created to strike through jobsite challenges. Engineered with the professional in mind, each tool is job-matched to fit the task at hand. Features: Designed for pole-line work   Rugged and well-balanced, with the weight to drive lag bolts   Forged, tempered-steel head for use in tight areas   Identical faces with round-crown driving surface and beveled edges

Learn More

 Rescue Swivel helps to eliminate twisting in critical lines due to load rotation. Its 9000lb (40kN) MBS gives you piece of mind when moving the heaviest of loads, and its sealed ball bearing will keep it operating smoothly for years.

*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition.  *Not Certified*

Size: 4 1/4" x 1 3/4"
Weight: 5.6 oz
Breaking Strength: 9,000 pounds

Learn More

The Head Rush Bump Stop is considered a sacrificial part that is designed to wear out over time Learn More

Liberty Large Steel "D" Carabiner . Large gate opening (1"). Big basket! Great for clipping lots of things at once or clipping into bulky harnesses or large diameter ropes. Learn More

GUY ANCHORS- Helix Ground Anchors : 4" x 3/4" x 54" Learn More

GUY ANCHORS- Helix Ground Anchors : 10" x 1-1/4" x 96" Learn More

GUY ANCHORS- Helix Ground Anchors : 8" x 1" x 66" Learn More

GUY ANCHORS- Helix Ground Anchors : 6" x 3/4" x 66" Learn More

Deep Cut Pole Auger Bits Learn More

Durable, easy-to-use full-body harness for adventure parks

Learn More

Zipline Cable Ferrule - Zinc Plated, Two ferrules are required for life support and ziplining applications (ACCT Standards). The extra ferrule serves as a backup in case of primary ferrule failure due to defects or improper swaging. A 12 ton crimper/compression tool is required for 1/4" - 1/2" ferrules Learn More

Looking to enhance your program offerings with some specialized equipment? ESI offers three different universal accessibility kits that come complete with a variety of equipment that will help serve the needs of climbers who need additional support. 

 

The UAK-1 comes complete with the following:

If you need additional components for a larger course, ask us about the UAK-2 and UAK-3.

 

• Misty Mountain Easy Seat - a specialized rigid yet padded seat that has an integrated rated harness system allowing lower body support without sacrificing upper body mobility.

 

• Handlebar Ascender (Wellman pull-up bar or similar)  - a traditional ascender mechanism that will grab the rope with the integrated cam while also providing a variety of hand hold options including the built in handlebars.
  
• 1M Mechanical Advantage System (Petzl JAG or similar) - this compact system provides mechanical advantage at your fingertips when climbing at height and needing assistance transferring from one cable to the other. 
  
  
• Trolley w/ anti-rollback cam (ISC Zippy or similar) - this trolley allows for smooth forward movement on a course and option to sit in the system and take a break without losing forward momentum.
  
  
• Bosun chair (Petzl Podium or similar) - a rigid chair that is stowed out of the way on the climber and dropped into position at any point along the climb as an extra seat providing quick lower body support and resting spot.
  
  
• ISC R-ALF Pulley System - this system creates a 5:1 mechanical advantage with integrated locking hub option for those climbers who need assistance ascending vertically into a course. It includes everything needed for the full system including the R-ALF hub, two double pulleys, rope, carabiners and a handy storage bag.

Learn More

EYE NUTS and EYELETS, Eyelets, also known as Bolt Eyes, are used under the head or nut of a bolt. All are compatible with the strength of the bolts used with them. Learn More

Nylon Shock Cord consists of a stranded rubber core covered with braided fiber resulting in an elastic cord with consistent stretch and strength. The durable "bungee type" cord is covered with nylon. Learn More

Used as spacers or supports under screw or bolt heads. Our washers are heat treated galvanized. Learn More

Adjama Climbing Harness, Lightweight and very flexible, thanks to the Delta System leg loop front panels and small dimension leg buckles. Learn More

Lock washers are a critical component to through bolts on wood poles. Pole shrinkage mandates the use of double coil lock washers to keep pressure on the nut and bolt to prevent loosening. Learn More

Ferrules must be properly crimped to achieve holding strength. Properly swaged ferrules can hold 90% of cable strength. Two ferrules are required for life support and ziplining applications (ACCT Standards). Learn More

Ferrules must be properly crimped to achieve holding strength. Properly swaged ferrules can hold 90% of cable strength. Two ferrules are required for life support and ziplining applications (ACCT Standards). Learn More

Ferrules must be properly crimped to achieve holding strength. Properly swaged ferrules can hold 90% of cable strength. Two ferrules are required for life support and ziplining applications (ACCT Standards). Learn More

With a maximum weight of 165 g, the SIROCCO helmet sets a new standard for lightness. The one-piece construction minimizes helmet weight while retaining excellent impact resistance, due to the mechanical properties of expanded polypropylene (EPP). Learn More