Search results for: 'petzl+standard+rope+bag'
- ELIA: Women's climbing and mountaineering helmetAs low as $76.95The ELIA helmet was designed and developed to respond specifically to the needs of women. The innovative OMEGA headband system (Petzl patent) allows the helmet to be put on and removed easily and offers maximum comfort. In addition to this exclusive feature, the helmet has a new headband adjustment mechanism. It allows the helmet to be precisely adjusted for different head shapes. Learn More
- /12" Carriage Bolt w/Nut & WasherAs low as $1.65Carriage Bolt w/Nut & Washer, The square neck under the round head will seat into the hole in the wood to prevent the head from turning. Because they are used with wood, carriage bolts are rarely high strength and virtually always supplied in a standard ASTM A307 specification. Learn More
- CMI Swivel$122.95
Rescue Swivel helps to eliminate twisting in critical lines due to load rotation. Its 9000lb (40kN) MBS gives you piece of mind when moving the heaviest of loads, and its sealed ball bearing will keep it operating smoothly for years.
*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition. *Not Certified*
Size: 4 1/4" x 1 3/4"
Learn More
Weight: 5.6 oz
Breaking Strength: 9,000 pounds - Kong "Y" Rescue Lark's Foot$35.94The Kong "Y" Rescue Lark's Foot is an asymmetric security loop in Y-shape of 13mm tape for self-securing canyoning. Learn More
- Petzl AVAO Sit Work harnessAs low as $270.35PetzlAVAO SIT Zipline/Work harness, With a ventral attachment point that distributes the load between the waistbelt and the leg loops during suspended work Learn More
- Robertson Superman Harness$343.79Commercial grade harness acceptable for use in engineered zip line tours, canopy tours, and aerial adventure/trekking parks Learn More
- Torse Shoulder Strap$27.54Torse Shoulder Strap, The TORSE shoulder strap allows the CROLL ventral rope clamp to remain correctly positioned in order to optimize efficiency and comfort during rope ascents. Learn More
- Singing Rock V Lanyard$42.07The Singing rock V safety zip line lanyard designed to keep you connected to your protection at all times. “V” design allows you to stay connected while passing protection points. Learn More
- LEAP Anchor -As low as $9.95Zip Line LEAP Anchor, A high-strength, multi-purpose anchor that can be used equally well as self-belay anchors on staple climbs or as the ideal termination fitting on belay cables anywhere where the cable load is at 90° to the angle of the bolt Learn More
- Snap Hook - Industrial Snap HooksSpecial Price $14.00 Regular Price $15.00Snap hooks are recommended as they are easier for small hands, more ergonomically friendly and are permanently attached to the lobster claws. Learn More
- CMI EXPEDITION ASCENDERAs low as $107.96CMI EXPEDITION ASCENDER, The Expedition Ascender is a perfect choice for big wall or mountaineering endeavors. Engineered for comfort, the handle opening is extra wide to accommodate gloved hands. Works with 7mm-12mm ropes. Sold individually. Learn More
- ISC R-ALF 5:1 Mechanical Advantage Haul / Rescue Kit$1,528.00
RSRP431 R-ALF Rescue Hauler Pulley- 2 Way Auto Locking Approved standards CE 0120 ANSI Z359 :4: 2007
The R-ALF Pulley is the latest innovation in Accessability, Rescue, Confined Space working and Work Suspension Systems. The R-ALF Pulley has an over-speed brake built in so that the Pulley will lock on and hold when a fall occurs. The load rated Becket Eye on the R-ALF means that it can be used in combination with Prussic Pulleys to create a 3: 1 or 5: 1 Mechanical Advantage System. The unique design of the R-ALF (design patent applied for), means that an internal brake is not required and therefore it is capable of several thousand cycles and many arrests (minimum 12 monthly service intervals apply). Weight (grams) 1200 Weight (ounces) 43 Rope diameter range (mm) Approved 11mm EN1891-A Ropes Only Number of persons 2
Learn More - Removable Climbing Hold - Flush Mount -Removable Hold - With Bracket - Concrete$68.95
Removable climbing holds have been machined not to overlap the baseplate. Building this product is a complicated process using climbing holds intentionally designed for the baseplate and key. We recommend you purchase this fully assembled version.
If a climbing hold overlaps the baseplate, it will not meet commercial playground standards. Other products in the industry have their climbing holds overlapping the baseplate.
Once the base plate is attached to your wall, no tools are required to remove and reinstall the hold assembly. A removable climbing hold is ideal when your wall is not in use and you must prevent access to meet ACCT/CPSI standards.
To install, screw the baseplate to the wall, insert the key/climbing hold into the top of the slot and slide the climbing hold down to the bottom of the bracket.
- Plate dimensions are 4-3/4" at the widest x 6-1/2" tall.
- One rock climbing hold and bracket assembly included.
- This product comes fully assembled and includes attachment screws.
- Insert into the slot and slide down to lock in place.
- Slide up and lift out of the slot for easy removal.
- Ten different designs, which are all jugs.
- Large base plate to accommodate large holds and meet ASTM, ACCT, CPSI, and CSA standards.
- Head Rush zipSTOP Zip Line Braking System$5,400.00The Head Rush zipSTOP Braking System. This zipSTOP Brake Trolley is engineered for a fine balance. It is able to handle the abuse of heavy impact collisions, yet light enough to increase the odds of reliable reset. Learn More
- Klein Linemans Wrench - Blue Smasher$100.00
Klein Tools' Lineman's Wrenches are forged from special bar steel and heat-treated for durability and long life. These wrenches are designed for use on heavy three-bolt guy clamps where clearance is limited. Each end has two different size openings, plus a hole at the larger end for turning-in standard pole steps.
- Forged from special bar steel and heat-treated for long life
- Each end has two different size openings
- Small end has 5/8-Inch and 13/16-Inch openings; large end features 29/32-Inch and 1-3/32-Inch openings
- Hole is provided at larger end for turning-in standard pole steps
- Made in USA
- Wrench is suited for use on the heavy three-bolt guy clamps on which clearance is limited
- Dark blue painted finish
- Head Rush TRUBLUE Auto BelayAs low as $2,195.00An auto belay is an automatic belay device that eliminates the need for a human belayer. In the case of the Head Rush TRUBLUE Auto Belay, it uses Head Rush's patented self-regulating braking system, which is enabled by non-contacting magnetic braking technology. Learn More
- CONNEXION FIXE Anchor strapAs low as $31.55CONNEXION FIXE Anchor strap, Forged steel D-rings on the ends. The Connexion Fixe anchor strap is the climbers choice for top rope anchor systems. This anchor strap is the best for rock climbing rope systems. Learn More
- Head Rush Auto Belay Tru Mount$139.95
The TRU-Mount Auto Belay mounting system is an elegant and cost-effective method to add the TRUBLUE Auto Belay to most climbing facilities.
Learn More - Head Rush zipSTOP IR/ zip STOP IR Zip Line Braking System$5,880.00The best brake for your zip line,Head Rush zipSTOP Zip Line Brake uses Head Rush's self-regulating eddy current magnetic braking system to brake zip line riders smoothly, comfortably, and consistently, even at high speeds. Learn More
- SIMBA Full body adjustable Childs Harness$68.95Because small children do not have well-defined hips for a waist belt to latch onto, the full body design is necessary for safety on any zipline/ropes course. Learn More
- BEAL BIRDIE SEMI-AUTO BELAY DEVICESpecial Price $82.50 Regular Price $89.99
Compact belay device with assisted braking for lead climbing or top rope. All metal construction with cam and friction components in stainless steel for great durability. The rope exits following the device’s axis to avoid twisting. The BIRDIE can be used with all dynamic single ropes from 8.5mm to 11mm.
- All steel construction
- Compatible with ropes from 8.5mm to 10.5mm
- Weight: 210g 7.4 oz
- Head Rush QUICKFlight Free Fall$3,594.00
The Head Rush quickFLIGHT Free Fall Device gives riders the sensation of a “free fall” while comfortably lowering them to the ground.
Learn More - Headwall Universal HarnessAs low as $45.00Headwall Universal Harness, The headwall is a 'double back' harness. This style takes longer to put on but will not loosen over time as parachute buckle harnesses can do Learn More
- Brakehawk- Zip Line Hand BrakeAs low as $131.94Brakehawk- Zip Line Hand Brake, No more burning through bulky welding gloves or slamming into a zip line bungee brake that leaves you with a hurting neck Learn More
- Kong Futura Hand AscenderAs low as $108.00Kong Futura Hand Ascender, It is extremely small though easy to use, weighs only 125g, and comes with two different sized handles for ergonomic customisation Learn More
- Large D Twistlock -ANSI$23.07This Large Twistlock carabiner has a key gate opening for smooth clips and unclips. No more snagging on ziplining harnesses, cables, gear or bolts. Learn More
- Fusion Roar Deluxe Zip Line Harness-Professional Harness$486.00Roar Deluxe Zip Line Harness-Professional Harness, The Roar Deluxe Zip Line Harness is perfect for many adventurers who have disabilities Learn More
- Maillon Rapid Pear Quick Link 5/8"$24.75The Pear shape offers the same nut opening as large opening quick links but its curved shape allows smooth connection of several parts together. Learn More
- Yates Shock Absorber$60.00Utilizes a highly efficient tear-stitch webbing to absorb energy by means of controlled destruction. Learn More
- Kong Indiana Full II Full Body Harness - Universal Size$196.79
Kong Indiana Full II is a full body harness for adventure parks. The upper straps keep the body inside the harness in case of rollover, increasing safety.
- Leg loops with different colors allow easy dressing
- Easy and intuitive size regulation
- Universal size that fits both adults and children
- Wide aluminum ventral attachment point
- Aluminum dorsal attachment point
- Fits Waist Size: Universal
- Leg Size: Universal
- Standards & Certifications: EN 12277 Type C
- CMI Micro Haul Pulleys$190.34The perfect size for light and tower rescues. Fits ropes from 8mm to 1/2". Features built in safety cam for use in "jigger" or "short haul" systems. Use with CMI micro single or double pulley 3:1 or 4:1 mechanical advantage systems. Features a centered bronze bushing. Strength: 7000 lbs. The CMI Single Micro Hauler is 154 mm. tall, 53 mm wide, and 40 mm. thick and 19 g. Learn More
- Head Rush zipSTOP IR Replacement Braking Line$300.00The Head Rush zipSTOP IR Zip Line Brake is fitted with a braking line that can be replaced easily in the field by the owner using the Replacement Braking Line. Learn More
- CHANCE® 6449 Guy Clamp, 1/4 to 7/16 in Strand, 1/2 in Clamping Bolt, 4 in L x 1.56 in W, Steel$29.95
Width: 1.56 in Strand Size: 1/4 to 7/16 in Specifications: 100 ft-lb Minimum Bolt Torque Finish: Hot Dipped Galvanized Length: 4 in Material: Steel Clamping Bolt Size: 1/2 in Suitable For Use With: Loop Type Guy Dead End Order Interval: 1 Vendor SKU: 6449 Standard & Approvals: ARRA Compliant|Buy American Act Compliant|ASTM A153 Manufacturer: Hubbell Includes: (3) Bolts Brand: CHANCE® Features & Benefits: - Parallel grooves trap strand tightly without marring
- Each bolt has a shoulder to prevent turning while tightening
- Adjama Climbing HarnessAs low as $89.94Adjama Climbing Harness, Lightweight and very flexible, thanks to the Delta System leg loop front panels and small dimension leg buckles. Learn More
- Voltige Chest Harness$71.94Voltige Chest Harness will also increase your "hang" comfort and keep your body in an upright position in case of a fall. Must use with a Sit Harness. Learn More