Search results for: 'seat test cam rope'

Multiline 3-Strand Spliced Rope Zip Line Lanyards (tethers). Plastic teardrop shaped thimble on each end.

Learn More

Nail Chipper Tri-Cut Auger Bits, Typically when drilling a hole for a through bolt as used in ropes course or zip line construction, you will need to drill a hole 1/16" bigger than the bolt you are using. 5/8" bolt requires a 11/16" hole. These are all 18" long bits. 7-1/2" are available by request. Learn More

A proven winner for the ropes course. Double-back buckles on the legs and waist.

One Size Fits Most

Learn More

The Head Rush quickFLIGHT Free Fall Device gives riders the sensation of a “free fall” while comfortably lowering them to the ground.

Learn More

The Rescue Figure 8 is a special figure 8 for rescue situations and fast rappeling.  It has a special shap for multiple rope locking, allows rappeling with heavy loads, has a high strength, and fits a wide range of rope diameters. Available in light alloy or stainlees steel.

• Weight: 154g, 5.43oz (alloy) 451g, 15.9 oz (stainless steel)
• Material: Light alloy or stainless steel
• Strength: 40kN

Learn More

Stainless steel sideplates, 3"aluminum sheave, bushing, and stainless steel axle. 

 

MBS	Rope Capacity	Size	Weight	Efficiency
16000lbs	5/8"	6.5x4.25in	1.35lb	92.1%

Learn More

Stainless steel sideplates, 2" aluminum sheave, needle bearing, and stainless steel axle.

 

MBS	Rope Capacity	Size	Weight	Efficiency
8000lbs	1/2"	5x2.5in	0.5lb	90.6%

Learn More

Black anodized aluminum sideplates, 2 3/8" zinc coated steel sheave, bushing, and stainless steel axle. 

MBS	Cable/Rope Capacity	Size	Weight	Efficiency
6000lbs	5/8"	4.375x3.5in	0.75lb	91.4%

 

Learn More

Just Perfect Pole Steps : JP Step II

 

The JP Step I and JP Step II  are Pole/Tree steps and fall protection anchor in one (think integrated LEAD anchor). Installs with 5/8" x 6" lag in poles and 5/8" x 8" lag in trees for the JP I and II. The JP R uses a Specialty 4" Lag Bolt and plate that comes with it. Supports over 5,000 lbs when properly installed. A great alternative to traditional pole steps and staples.  These pole/tree steps are easily installed (about one minute). They also provide great positive climbing aids for hands, feet, and safety anchors. JP Steps for trees and poles are the best looking and safest integrated step - fall protection anchor for ropes courses, challenge courses, and zip line access.

Learn More

By incorporating a rigid stem on this belay/rappel device, climbers go from full lock-off to whipping out rope in a single, smooth action. No more binding up as the device tries to free itself. The amount of friction can be easily adjusted to suit your particular need. Climbing with fat ropes, a skinny partner or on low-angle slabs? Belay with the U-Grooves and clip into the bottom hole of the XF Forge for less friction. For the ultimate control, wrap that skinny cord around the rigid stem and rappel, figure-8 style.

Learn More

This rainbow para cord is ideal for lazy lines (or haul lines) on ropes courses and climbing walls, as well as general use. Kernmantle construction for high strength and low stretch. 350 lb strength rating. 1/8" (3mm).  Made in the Mexico.

Learn More

This rainbow para cord is ideal for lazy lines (or haul lines) on ropes courses and climbing walls, as well as general use. Kernmantle construction for high strength and low stretch. 350 lb strength rating. 1/8" (3mm).  Made in the Mexico.

Learn More

The SWIVEL OPEN gated swivel features a wide opening and thus can be attached to a range of products (pulleys, lanyards). It reduces the bulk and weight of component systems and solves the twisting and tangling problems of ropes and lanyards. Sealed ball bearings offer excellent performance and reliability.

Learn More

Fully adjustable harness for work positioning withcontinuous adjustable webbing, SPEED buckles, padded wide waist belt, anatomicleg loops and shoulder straps.

• super comfortable wide waist belt padding provides maximum comfort when working at height
• strength webbing on the waist belt is stitched in the way that at normal working situation the body weight is absorbed by the padding only
• reflective strap and printing on the waist belt and a reflective strap on the shoulder padding increase the visibility in dark working conditions (the black version of the harness is not equipped with the reflective elements)
• anatomic leg loops and waist belt are covered with strong PES fabric providing high abrasion resistance
• standard easy lock buckles enable smooth adjustment
• narrowed padding and webbing on the shoulder straps in a neck area enhance comfortable work
• leg loops connection straps made from durable PES webbing for better abrasion resistance
• front and back attachment points for fall arrest according to EN 361 marked with additional “A“ marking
• flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus
• front lower attachment point for descender placement or work positioning according to EN 813
• 2 side attachment points for work positioning according to EN 358
• 4 ergonomic braided gear loops with a bearing capacity of 5 kg
• heavier items up to 35 kg can be attached to the webbing on the waist belt
• additional loops on the waist belt and leg loops with a bearing capacity of 5 kg offer additional space for the gear and better gear organization
• wide elastic band at left shoulder strap for the gear attachment (e.g. transmitter)
• slots at the waist belt for Porter tool holder to carry your industrial tools
• shoulder attachment points for confined space rescue according to EN 1497
• chest ascender smart fixation system (using an additional maillon), works best with Cam Clean
• all steel components finished with E-coating for higher corrosion resistance
• identification and methodical label
• Weight: 177g, 62.68oz
• Max Rated Load: 150 kg
• Certifications: EN 358, EN 361, EN 813, EN 1497, CE 1019

Learn More

The Challenge harness is built for group-use activities like ropes courses, indoor and outdoor climbing as well as mountaineering. It is an adjustable unpadded harness with three auto locking buckles. A single visible attachment point, closing of the waist on the right side, and two different leg colors for ease and speed of use.

Learn More

Full adjustable full body harness intended for rope courses and adventure parks. Speed buckle on the shoulder straps for quick on and off.

• Weight: 1530 grams/54 oz
• Easy to put on and take off
• Shoulder straps connect with Speed Buckle
• Padded waist belt and legs
• Buckle with captive bar matches ANSI and CSA standards
• CE 1019, EN813, EN361

Learn More

RSRP431 R-ALF Rescue Hauler Pulley- 2 Way Auto Locking Approved standards CE 0120 ANSI Z359 :4: 2007

 The R-ALF Pulley is the latest innovation in Accessability, Rescue, Confined Space working and Work Suspension Systems. The R-ALF Pulley has an over-speed brake built in so that the Pulley will lock on and hold when a fall occurs. The load rated Becket Eye on the R-ALF means that it can be used in combination with Prussic Pulleys to create a 3: 1 or 5: 1 Mechanical Advantage System. The unique design of the R-ALF (design patent applied for), means that an internal brake is not required and therefore it is capable of several thousand cycles and many arrests (minimum 12 monthly service intervals apply). Weight (grams) 1200 Weight (ounces) 43 Rope diameter range (mm) Approved 11mm EN1891-A Ropes Only Number of persons 2

Learn More

A Super-efficient slicing tool that makes the most of its simple design and sturdy construction, the Vital Zip Knife holds a utility blade which is easily replaced once dull with a quick release of the Phillips screw holding the blade in position. The Vital Zip works well for cutting webbing and rope and to remove clothing from injured persons in rescue situations. And its feather light aspect means it can be carried along on a belt or in a kit pack without adding undue weight to your gear.

Learn More

Pulley carabiner, available in versions with or without TRIACT-LOCK locking system. Learn More

Misty Mountain Challenge Harness – has quick adjust waist and leg buckles. Designed specifically for climbing gyms, ropes courses and challenge towers, the Challenge Harness is simple to use, safe and durable. It features a single reinforced tie-in point and pre threaded, quick adjust waist and leg loop buckles. The single tie in point, along with the quick adjust waist and leg buckles, provide for a quick set up and the durable components ensure much hard wear. Quick and convenient, the Challenge Harness is a great all around program harness.

Youth: Green tie-in point
Standard: Blue tie-in point
X-Large: Black tie-in point

Learn More

Petzl ZigZag Prusik The linked rings provide precision and fluidity when moving around. The pulley is mounted on ball bearings to allow the slack to be taken up easily. Learn More

The Redirection Pulley is the first pulley of its kind for the zip line industry; lightweight, corrosion-resistant and specially engineered to be virtually resistant to snagging. Learn More

The CMI Velocity Micro Zipline trolley is a fast zip line trolley that is small and light weight. Stainless steel side plates assure long life and minimal wear. Learn More

This is a great low profile SRD with a parallel attachment to easily align cable and belay loading. Super strong with a triple axle design and a thick folded plate design. Learn More

Knot-passing pulley allows passage of joining knots Large diameter sheave mounted on sealed ball bearings for excellent efficiency. Learn More

Shoulder Eye Screw Lag, Use for connecting hand lines, spiders webs to trees, etc. on challenge courses. Do not use in life support applications. Also used when wrapping cable around a tree. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Stainless Steel Cable clamps are ideal for use in salty and acidic environments like zip lining close to oceans or salt lake. These are durable and outlast Drop Forged clamps in harsh environments. Learn More

The smallest and strongest knot passing pulley on the market today! With an incredible MBS of 15,000 lbs and high strength stainless steel, our knot passing pulley puts the others to shame. Learn More

Petzl Caterpillar Edge Protector, The Caterpillar Edge Protector can be positioned independently to adapt to whatever the terrain throws at you Learn More

Ready-to-use reversible rescue kit designed to easily pick off and lower a victim. Learn More

The Figure 8 by Omega Pacific remains a popular device for their simplicity, durability and dependability. Learn More

Our most versatile belay and abseil device made of solid stainless steel for durability. Learn More

Openable even when attached to the anchor, the PRO pulley is designed for maximum simplicity when setting up hauling or load deviation systems. Learn More

The CORAX is the versatile harness par excellence: easy to use and comfortable, it is designed for rock climbing, mountaineering or via ferrata. Learn More

Double pulley designed for use with the JAG TRAXION double progress capture pulley to make a 4:1 haul system. Sheaves mounted on sealed ball bearings for excellent efficiency. Learn More