Search results for: 'large rope belai'
- Did you mean
- large rope beal
-
Steel Caving ladder$199.00
Steel cable with aluminum rungs. Can be used in ropes courses, caving, rope access work, or emergency preparedness kits.
- Length 32 feet
- Weight: 3 lbs 4 oz.
- Width: 6"
- Breaking Strength: 1324 lbs.
-
Kong Futura Foot Ascender$102.00Kong Futura Foot Ascender, the Futura system (hand ascender, chest ascender and foot ascender) will be the most compact SRT hardware available on the market - but it will not be the cheapest! The Futura is here. A radical new approach to climbing ropes. Designed by top cavers for tight places in the most remote areas on earth (or under it). Surprisingly simple the new designs are comfortable to use thanks to the ergonomic grips. Learn More
-
RP 129 NFPA rescue Pulley$156.50
Stainless steel sideplates, 3" red anodized aluminum sheave, bushing, and stainless steel axle.
*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition.
MBS
Rope Capacity
Size
Weight
Efficiency
16000lbs
1/2"
6.75x5.25in
1.65lb
91.7%
-
Uplift$418.95
Red/Black anodized aluminum sideplates, two 3" aluminum sheaves, bushing, and stainless steel axle.
*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition. *Not Certified*
MBS
Rope Capacity
Size
Weight
Efficiency
12000lbs
1/2"
10x4in
2.6lb
184%
-
5/8" Zip Pulley lanyardAs low as $22.30
Multiline 3-Strand Spliced Rope Zip Line Lanyards (tethers). Plastic teardrop shaped thimble on each end.
Learn More -
Nail Chipper Tri-Cut Auger BitsAs low as $43.93Nail Chipper Tri-Cut Auger Bits, Typically when drilling a hole for a through bolt as used in ropes course or zip line construction, you will need to drill a hole 1/16" bigger than the bolt you are using. 5/8" bolt requires a 11/16" hole. These are all 18" long bits. 7-1/2" are available by request. Learn More
-
Liberty Mountain Guide HarnessSpecial Price $38.95 Regular Price $42.95
A proven winner for the ropes course. Double-back buckles on the legs and waist.
One Size Fits Most
Learn More -
RESCUE FIGURE 8Special Price $42.80 Regular Price $44.99
The Rescue Figure 8 is a special figure 8 for rescue situations and fast rappeling. It has a special shap for multiple rope locking, allows rappeling with heavy loads, has a high strength, and fits a wide range of rope diameters. Available in light alloy or stainlees steel.
- Weight: 154g, 5.43oz (alloy) 451g, 15.9 oz (stainless steel)
- Material: Light alloy or stainless steel
- Strength: 40kN
-
ARC Universal Full Body HarnessSpecial Price $530.00 Regular Price $545.95
The original Adaptive Ropes Course harness, the ARC allows all participants to experience challenge courses and ziplines, without regard to physical ability. Designed especially for participants with physical challenges, the ARC features a thickly padded, rigid seat, with integrated chest and pelvic harnesses, secure four point attachment system and dorsal head panel, providing a safe, comfortable harness for experiencing modern ropes courses.
*ARC Spreader Bar sold separately*
Learn More -
RP105 Heavy Duty 3" Pulley$113.50
Stainless steel sideplates, 3"aluminum sheave, bushing, and stainless steel axle.
MBS
Rope Capacity
Size
Weight
Efficiency
16000lbs
5/8"
6.5x4.25in
1.35lb
92.1%
-
CMI RP117 2" Stainless Steel Service Line Pulley$66.50
Stainless steel sideplates, 2" aluminum sheave, needle bearing, and stainless steel axle.
MBS
Rope Capacity
Size
Weight
Efficiency
8000lbs
1/2"
5x2.5in
0.5lb
90.6%
-
Head Rush zipSTOP IR/ zip STOP IR Zip Line Braking System$5,880.00The best brake for your zip line,Head Rush zipSTOP Zip Line Brake uses Head Rush's self-regulating eddy current magnetic braking system to brake zip line riders smoothly, comfortably, and consistently, even at high speeds. Learn More
-
RC 102 Cable Able Pulley$83.50
Black anodized aluminum sideplates, 2 3/8" zinc coated steel sheave, bushing, and stainless steel axle.
MBS
Cable/Rope Capacity
Size
Weight
Efficiency
6000lbs
5/8"
4.375x3.5in
0.75lb
91.4%
-
JP Step II Pole Step / Tree Step$38.40
Just Perfect Pole Steps : JP Step II
The JP Step I and JP Step II are Pole/Tree steps and fall protection anchor in one (think integrated LEAD anchor). Installs with 5/8" x 6" lag in poles and 5/8" x 8" lag in trees for the JP I and II. The JP R uses a Specialty 4" Lag Bolt and plate that comes with it. Supports over 5,000 lbs when properly installed. A great alternative to traditional pole steps and staples. These pole/tree steps are easily installed (about one minute). They also provide great positive climbing aids for hands, feet, and safety anchors. JP Steps for trees and poles are the best looking and safest integrated step - fall protection anchor for ropes courses, challenge courses, and zip line access.
Learn More -
Para-Cord / P-Cord Rainbow - 3000' Spool$219.00
This rainbow para cord is ideal for lazy lines (or haul lines) on ropes courses and climbing walls, as well as general use. Kernmantle construction for high strength and low stretch. 350 lb strength rating. 1/8" (3mm). Made in the Mexico.
Learn More -
Para-Cord / P-Cord Black- 3000' Spool$219.00
This rainbow para cord is ideal for lazy lines (or haul lines) on ropes courses and climbing walls, as well as general use. Kernmantle construction for high strength and low stretch. 350 lb strength rating. 1/8" (3mm). Made in the Mexico.
Learn More -
Petzl P58 SO Open Gated Swivel with Sealed Ball Bearings, Yellow/Black$79.95
The SWIVEL OPEN gated swivel features a wide opening and thus can be attached to a range of products (pulleys, lanyards). It reduces the bulk and weight of component systems and solves the twisting and tangling problems of ropes and lanyards. Sealed ball bearings offer excellent performance and reliability.
Learn More -
Edelweiss Challenge Sit HarnessSpecial Price $47.50 Regular Price $49.50
The Challenge harness is built for group-use activities like ropes courses, indoor and outdoor climbing as well as mountaineering. It is an adjustable unpadded harness with three auto locking buckles. A single visible attachment point, closing of the waist on the right side, and two different leg colors for ease and speed of use.
Learn More -
ISC R-ALF 5:1 Mechanical Advantage Haul / Rescue Kit$1,528.00
RSRP431 R-ALF Rescue Hauler Pulley- 2 Way Auto Locking Approved standards CE 0120 ANSI Z359 :4: 2007
The R-ALF Pulley is the latest innovation in Accessability, Rescue, Confined Space working and Work Suspension Systems. The R-ALF Pulley has an over-speed brake built in so that the Pulley will lock on and hold when a fall occurs. The load rated Becket Eye on the R-ALF means that it can be used in combination with Prussic Pulleys to create a 3: 1 or 5: 1 Mechanical Advantage System. The unique design of the R-ALF (design patent applied for), means that an internal brake is not required and therefore it is capable of several thousand cycles and many arrests (minimum 12 monthly service intervals apply). Weight (grams) 1200 Weight (ounces) 43 Rope diameter range (mm) Approved 11mm EN1891-A Ropes Only Number of persons 2
Learn More -
CMI Swivel$122.95
Rescue Swivel helps to eliminate twisting in critical lines due to load rotation. Its 9000lb (40kN) MBS gives you piece of mind when moving the heaviest of loads, and its sealed ball bearing will keep it operating smoothly for years.
*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition. *Not Certified*
Size: 4 1/4" x 1 3/4"
Learn More
Weight: 5.6 oz
Breaking Strength: 9,000 pounds -
D4 Rescue Descender$295.95
The D4 Work/Rescue Descender features a unique and innovative cam action, which offers precise control at slow or fast speeds. The progressive cam works by way of one cam operating inside another cam. The D4 is the only ANSI certified descender on the market today.
- Weight: 655 grams (23 ounces)
- Strength: MBS 16kN (3597lbf)
- For use with single ropes from 10.5 - 11.5mm (7/16")
- Working Load Rating (WLL): 240kg (551lbs.)
- Certifications: CE EN12841, NFPA 1983, ANSI Z359
-
VITAL ZIP Rescue Knife$22.00
A Super-efficient slicing tool that makes the most of its simple design and sturdy construction, the Vital Zip Knife holds a utility blade which is easily replaced once dull with a quick release of the Phillips screw holding the blade in position. The Vital Zip works well for cutting webbing and rope and to remove clothing from injured persons in rescue situations. And its feather light aspect means it can be carried along on a belt or in a kit pack without adding undue weight to your gear.
Learn More -
Petzl Rollclip$47.94Pulley carabiner, available in versions with or without TRIACT-LOCK locking system. Learn More
-
Petzl ZigZag Prusik$335.94Petzl ZigZag Prusik The linked rings provide precision and fluidity when moving around. The pulley is mounted on ball bearings to allow the slack to be taken up easily. Learn More
-
Redirection Pulley$105.60The Redirection Pulley is the first pulley of its kind for the zip line industry; lightweight, corrosion-resistant and specially engineered to be virtually resistant to snagging. Learn More
-
CMI MICROTROLLEY PULLEY$129.95The CMI Velocity Micro Zipline trolley is a fast zip line trolley that is small and light weight. Stainless steel side plates assure long life and minimal wear. Learn More
-
Petzl Micro Traxion$149.94MICRO TRAXION is an ultra-compact, extremely light progress capture pulley that is exceptionally efficient. The cam can be locked in open position so the device can be used as a simple pulley. Learn More
-
Petzl Jag Traxion$161.94Double progress capture pulley designed for use with the JAG double pulley to make a 4:1 haul system. Sheaves mounted on sealed ball bearings for excellent efficiency. Learn More
-
Shoulder Eye Screw LagAs low as $5.94Shoulder Eye Screw Lag, Use for connecting hand lines, spiders webs to trees, etc. on challenge courses. Do not use in life support applications. Also used when wrapping cable around a tree. Learn More
-
Turnbuckles: Cable Zip Line TurnbuckleAs low as $15.00Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Cable Clamps: Stainless Steel Cable ClampsAs low as $9.50Stainless Steel Cable clamps are ideal for use in salty and acidic environments like zip lining close to oceans or salt lake. These are durable and outlast Drop Forged clamps in harsh environments. Learn More
-
CMI Highline Knot Passing Pulley$243.95The smallest and strongest knot passing pulley on the market today! With an incredible MBS of 15,000 lbs and high strength stainless steel, our knot passing pulley puts the others to shame. Learn More
-
-
Kong Pro Cave Ascenders$117.00Designed by top cavers for tight places in the most remote areas on earth (or under it). Surprisingly simple the new designs are comfortable to use thanks to the ergonomic grips. Learn More
-
Petzl Caterpillar Edge Protector$179.94Petzl Caterpillar Edge Protector, The Caterpillar Edge Protector can be positioned independently to adapt to whatever the terrain throws at you Learn More
-
Yates Figure Eight Chest Harness$49.95Yates Figure Eight Chest Harness, Great for use on zip line operations. Attachment points at waist and between shoulders. Safety attachment at rear of waist. Padded waist belt. Super easy to get on and adjust. Learn More