Back to Top
Search results for: 'steel twist lock'
- Did you mean
- sterl twist lock
- stapl test lock
-
Edelrid Micro Jul$43.14A compact, ultra-light belay and abseil device for half ropes and twin ropes. The only suitable device for use with the Flycatcher 6.9 mm. Learn More -
Petzl Pantin Ascender$95.94Petzl Pantin Ascender, A big advantage for long rope ascents. With the Pantin Ascender supporting the foot, the body is held in a more upright position thus making the ascent faster and less tiring for the arms. Learn More
-
CHANCE® 5004 Strap Guy Hook, 1 Bolt Storm Style$8.95
Learn MoreFinish: Galvanized, ASTM A-153 Material: Steel Width: 1-1/2 in Length: 1/4 in Vendor SKU: 5004 Minimum Order Qty: 1 UPC: 096359072133 Order Interval: 1 Manufacturer: Hubbell Power Brand: CHANCE® Features & Benefits: - Guy hook restricts guy wire from creeping down pole in wrapped strand guy applications. Can also be used as guy attachment, when used in compliance with deadend manufacturer's requirements. Hooks should be installed under head of bolt for maximum bolt shear strength.
-
Square Curved and Square Flat WashersAs low as $2.00Square Curved Washers for nut eye bolts and machine bolts. Galvanized Square washers designed for outdoor use in challenge courses, zip lines and other outdoor applications. Learn More
-
Kong Zipline Evo Trolley$150.00The Zip Line Evo pulley system is the latest in new ropes course and zip line tailored equipment by Kong. The evolution of our first pulley with integrated connector, that avoids every possibility of mistake. Learn More
-
Beam Clamps: I-Beam ClampsAs low as $78.00They fit securely on a wide range of flange widths and beam sizes, with a built-in suspension bar that provides for close mounting. The clamp jaw design reduces flange stress by distributing the load away from the flange edge. Learn More
-
CMI Micro Ropes Course Pulley$33.99Designed for rescue, it is great for portable ropes courses, ski & mountain rescue, tyrolean back ups, rescue kits, Rescue training programs, and hauling up access nets and ladders to challenge courses and climbing towers. Learn More
-
Petzl Rescucender Ascender$107.94Simple to use and ergonomic, the RESCUCENDER is an openable cam-loaded rope clamp designed for use in haul systems as a tractor or progress capture device. Learn More
-
Head Rush zipSTOP Brake Trolley Catch Accessory Kit Upgrade$136.80The Catch Accessory is designed to keep the Impact Trolley and zipSTOP Brake Trolley attached after contact with each other, making for easier rider retrieval. Learn More
-
Rock Exotica enForcer Load Cell$1,142.40Rock Exotica enForcer Load Cell is a compact aluminum load cell that measures force up to 20 kN. Utilizing two sampling modes, the Enforcer is able to monitor systems, and log drop testing in high resolution. Learn More
-
Robertson Adjustable Lobster Claws$76.20These are the basic model with NO snap hooks or Zorber. These are only appropriate for clipping in to protection with some dynamic load absorbing features like rope or fairly slack cable such as a belay cable on a high ropes course or zipline. Learn More
-
GriGri 2 Belay Device$99.95The GRIGRI 2 belay device with assisted braking is designed to facilitate belay maneuvers. Learn More
-
Nail Chipper Tri-Cut Auger BitsAs low as $43.93Nail Chipper Tri-Cut Auger Bits, Typically when drilling a hole for a through bolt as used in ropes course or zip line construction, you will need to drill a hole 1/16" bigger than the bolt you are using. 5/8" bolt requires a 11/16" hole. These are all 18" long bits. 7-1/2" are available by request. Learn More
-
Removable Climbing Hold - Flush Mount -Removable Hold - With Bracket - Concrete$68.95
Removable climbing holds have been machined not to overlap the baseplate. Building this product is a complicated process using climbing holds intentionally designed for the baseplate and key. We recommend you purchase this fully assembled version.
If a climbing hold overlaps the baseplate, it will not meet commercial playground standards. Other products in the industry have their climbing holds overlapping the baseplate.
Once the base plate is attached to your wall, no tools are required to remove and reinstall the hold assembly. A removable climbing hold is ideal when your wall is not in use and you must prevent access to meet ACCT/CPSI standards.
To install, screw the baseplate to the wall, insert the key/climbing hold into the top of the slot and slide the climbing hold down to the bottom of the bracket.
- Plate dimensions are 4-3/4" at the widest x 6-1/2" tall.
- One rock climbing hold and bracket assembly included.
- This product comes fully assembled and includes attachment screws.
- Insert into the slot and slide down to lock in place.
- Slide up and lift out of the slot for easy removal.
- Ten different designs, which are all jugs.
- Large base plate to accommodate large holds and meet ASTM, ACCT, CPSI, and CSA standards.
-
Robertson SR71 Hammer Zip Line Trolley$206.40Using machined axles which may cost more but give the SR-71 Hammer zip line trolley unparalleled structural integrity. Learn More
-
CMI EXPEDITION ASCENDERAs low as $107.96CMI EXPEDITION ASCENDER, The Expedition Ascender is a perfect choice for big wall or mountaineering endeavors. Engineered for comfort, the handle opening is extra wide to accommodate gloved hands. Works with 7mm-12mm ropes. Sold individually. Learn More
-
Lag Screws: Lag BoltsAs low as $1.60Lag Screw Lag Bolt - Galvanized, Typically used for LEAP anchors, deck constuction for zip lines and ropes courses. Hot Dipped Galvanized; Hex Head Lag Screw. 5/8" x 6" lags or 5/8" x 8" lags are recommended for Leap/Lead/Bolt hanger anchors where through bolts are not required Learn More
-
7/16" - 9/16" AUGER BITS - Pilot bitsAs low as $15.45We offer three different style of pilot auger bits for 1/2" lags for ropes course decks, zip line decks and general deck construction for 1/2" & 5/8" lag bolts Learn More
-
Petzl Panji Harness$95.94PANJI adventure park/zipline harness is a one size harness covering a very wide range of body sizes. Learn More
-
ETD - Ropes Course Rescue Bag - 150' Rope$490.00
The ETD - Ropes Course Rescue Bag is filled with essential items to preform a aerial rescue. If there are extra items you require for you rescue bag simply order them separately and toss them in you bag.
Contents:
- 1 - Medium Orange Rope Bag w/Rope History Record - 150'
- 1- 7/16" x 100', 120' or 150' KMIII Orange Static Rope
- 6' - 5mm Tech Cord for Tying Prusik
- 1 - Pair EMT Shears
- 1 - Aluminum Rescue 8
- 4 - Steel Screw-Gate Big D Carabiners
- 1 - BFD/ATC (Belay Friction Device)
- 1 - 5 Step Easy Step Aider
- 1 - Set Fixed Length 1" Heavy Duty Webbing Lobster Claws w/Zorber & Hooks
-
Robertson Lobster Claws$36.20These lobster Claws are a unique, non-adjustable set of positioning / safety lanyards designed specifically for program high ropes courses. Learn More
-
Petzl Jag Rescue Kit$935.94Ready-to-use reversible rescue kit designed to easily pick off and lower a victim. Learn More
-
Petzl P42 CaritoolAs low as $12.95Petzl P42 Caritool, A carabiner-shaped tool holder designed to organize gear attached to a harness. Ice-screws, pitons, cams, as well as small tools, can be arranged and accessed single-handedly Learn More
-
Head Rush zipSTOP Zip Line Braking System$5,400.00The Head Rush zipSTOP Braking System. This zipSTOP Brake Trolley is engineered for a fine balance. It is able to handle the abuse of heavy impact collisions, yet light enough to increase the odds of reliable reset. Learn More
-
Head Rush zipSTOP IR/ zip STOP IR Zip Line Braking System$5,880.00The best brake for your zip line,Head Rush zipSTOP Zip Line Brake uses Head Rush's self-regulating eddy current magnetic braking system to brake zip line riders smoothly, comfortably, and consistently, even at high speeds. Learn More
-
-
Petzl TRAC GUIDE Zip Line Trolley$189.95Learn More
The Petzl TRAC GUIDE is a trolley designed for adventure parks. Featuring an ergonomic captive carabiner, it allows the guide to quickly install the trolley on the cable with one hand. Because the carabiner pivots, the trolley remains in position on the cable when it makes contact with the end brake of the zip line. The ends are equipped with protective impact surfaces to reduce the risk of pinched fingers, and two connector support grooves to help avoid abrasion from the cable. The JOKO and AVENTEX lanyards (sold separately) are directly integrated in the carabiner, limiting the risk of separation or loss. The carabiner’s reinforced construction provides greater resistance to damp and salty environments. Product life is extended with highly durable bearings and removable impact surfaces available as spare parts.
- Ergonomic captive carabiner allows the guide to quickly install the trolley on the cable with one hand
- Two aligned sheaves provide excellent stability on the zip line
- Because the carabiner can pivot, the trolley remains in position on the cable when it makes contact with the end brake of the zip line
- Front and rear impact surfaces limit the risk of pinched fingers
- Two positioning support grooves for the connectors limit abrasion from the cable
- JOKO or AVENTEX lanyards are directly integrated in the carabiner, limiting the risk of separating or losing the trolley/lanyard unit (Sold separately)
- Connect easily to the harness with the CARITRAC stowing accessory (included)
- Double-row ball-bearings offer optimal durability
- Carabiner with reinforced construction and hard anodization for greater resistance to damp and salty environments
- Impact surfaces optimize contact between the trolley and the end brake of the zip line
- Carabiner and impact surfaces are completely removable and available as replacement parts to extend the life of the trolley
- Also available in 5-packs
Specifications
- Cable diameter: 9 to 13 mm (may also be used on ropes)
- Material(s): Aluminum frame and carabiner, stainless steel sheave, nylon
- Maximum speed: 25 m/s
- Certification(s): CE EN 17109, CE EN 12278, UIAA
- Weight per unit: 425 g
-
