Back to Top
Search results for: 'carabiner small locking d 16,186 lb and 1 1'
- Did you mean
- carabiner stapl locking d 16,186 lb and 1 1
-
Robertson Superman Harness$343.79Commercial grade harness acceptable for use in engineered zip line tours, canopy tours, and aerial adventure/trekking parks Learn More -
CMI Double Expedition Ascender$171.95CMI Double Expedition Ascender, The cam is the same design as those in our now famous Ultrascenders and carries the same lifetime wear-out guarantee. Extra large handgrip opening easily accomodates gloved or mittened hands Learn More
-
Zipline Brake Barrell Spring$130.00
These patented barrel springs reduce initial impact by stopping the rider more gradually than traditional springs.
Determining how many springs you will need is easy! Simply take the incoming speed of your rider and for each mph, you need that many springs. (e.g., a 20-MPH zipline needs 20 springs for a 230-lb zipliner).
All spring systems REQUIRE TESTING to the maximum anticipated speed and load as per ACCT. Can be completed with a minimum of 250 lb. weights, sandbags, or bagged rock salt.
These Zipline Brakes install in minutes, NOT hours.
Made in the USA.
Each spring array includes a bumper at the beginning for trolley strikes.
Learn More -
New England Redi-Line$0.74An excellent choice for shore-based responders, this cost-effective polypropylene throwline features hollow-braid construction, which makes it easy to handle and stuff into throw bags. Learn More
-
JP Step II Pole Step / Tree Step$38.40
Just Perfect Pole Steps : JP Step II
The JP Step I and JP Step II are Pole/Tree steps and fall protection anchor in one (think integrated LEAD anchor). Installs with 5/8" x 6" lag in poles and 5/8" x 8" lag in trees for the JP I and II. The JP R uses a Specialty 4" Lag Bolt and plate that comes with it. Supports over 5,000 lbs when properly installed. A great alternative to traditional pole steps and staples. These pole/tree steps are easily installed (about one minute). They also provide great positive climbing aids for hands, feet, and safety anchors. JP Steps for trees and poles are the best looking and safest integrated step - fall protection anchor for ropes courses, challenge courses, and zip line access.
Learn More -
Edelrid HMS Strike Screw 5 Pack$65.70Very compact and lightweight HMS carabiner. Ideal for alpine climbing. Learn More
-
Canopy Tour Trolley: Zip Line Pulley$200.00Stainless Steel sideplates, two 2" Stainless Steel sheaves, Bearing, and Stainless Steel axle. Learn More
-
ROCK MASTER HELMET$61.45ROCK MASTER HELMET, The new Rock Master helmet has a comfortable and durable harness system that will keep you cool and comfortable. Learn More
-
Petzl Toolbag$35.94The TOOLBAG tool pouch allows the user to organize his tools during suspended work. Cordlock allows the pouch to be closed easily during transport or when moving about. Learn More
-
Easy Seat Accessibility Harness$420.95
The Easy Seat Accessability Harness offers participants with sufficient upper body strength and additional freedom of movement while still providing a padded seat and integral harness for security. The Easy Seat is excellent for rigging a 4 to 1 ascending system. It offers a firm, padded support of the lower body and complete upper body freedom. The participant is secured to the harness via leg loops, waist and chest.
Learn More -
Petzl TRAC GUIDE Zip Line Trolley$189.95Learn More
The Petzl TRAC GUIDE is a trolley designed for adventure parks. Featuring an ergonomic captive carabiner, it allows the guide to quickly install the trolley on the cable with one hand. Because the carabiner pivots, the trolley remains in position on the cable when it makes contact with the end brake of the zip line. The ends are equipped with protective impact surfaces to reduce the risk of pinched fingers, and two connector support grooves to help avoid abrasion from the cable. The JOKO and AVENTEX lanyards (sold separately) are directly integrated in the carabiner, limiting the risk of separation or loss. The carabiner’s reinforced construction provides greater resistance to damp and salty environments. Product life is extended with highly durable bearings and removable impact surfaces available as spare parts.
- Ergonomic captive carabiner allows the guide to quickly install the trolley on the cable with one hand
- Two aligned sheaves provide excellent stability on the zip line
- Because the carabiner can pivot, the trolley remains in position on the cable when it makes contact with the end brake of the zip line
- Front and rear impact surfaces limit the risk of pinched fingers
- Two positioning support grooves for the connectors limit abrasion from the cable
- JOKO or AVENTEX lanyards are directly integrated in the carabiner, limiting the risk of separating or losing the trolley/lanyard unit (Sold separately)
- Connect easily to the harness with the CARITRAC stowing accessory (included)
- Double-row ball-bearings offer optimal durability
- Carabiner with reinforced construction and hard anodization for greater resistance to damp and salty environments
- Impact surfaces optimize contact between the trolley and the end brake of the zip line
- Carabiner and impact surfaces are completely removable and available as replacement parts to extend the life of the trolley
- Also available in 5-packs
Specifications
- Cable diameter: 9 to 13 mm (may also be used on ropes)
- Material(s): Aluminum frame and carabiner, stainless steel sheave, nylon
- Maximum speed: 25 m/s
- Certification(s): CE EN 17109, CE EN 12278, UIAA
- Weight per unit: 425 g
-
Felco C112 Wire Rope Cutter$710.00The Felco C112 Cutter features maximum force transmission which applies the maximum leverage at just the right moment. This coupled with Swiss precision blades make this cutter very easy to use. Learn More
-
Professional Canopy Tour Trolley: Zip Line Pulley$335.95Stainless Steel sideplates, two 2" Stainless Steel sheaves, Bearing, and Stainless Steel axle. Learn More
-
CYPHER HELIOS SCREW GATE HMS$13.99
Our largest HMS designed for easy belay setup in any situation. The frame’s round bar stock works great with a variety of belay techniques including popular semi-auto locking devices, tube devices, and Munter hitch.
- CE EN12275 Certified
- Weight: 85g
- Strength (major axis): 25kN
-
Kong Pro Cave Ascenders$117.00Designed by top cavers for tight places in the most remote areas on earth (or under it). Surprisingly simple the new designs are comfortable to use thanks to the ergonomic grips. Learn More
-
Contigua Straight Gate$10.95Contigua Straight Gate, Whether for emergency use--when light and fast truly matter--or just to keep on your key-chain, the Contigua is a perfect fit. Available in various colors Learn More
-
Edelrid Orion Harness$143.94A very comfortable all-round harness with 3D-Vent Technology and adjustable leg loops for sport climbing and mountaineering. Learn More
-
-4%Edelweiss Challenge Sit HarnessSpecial Price $47.50 Regular Price $49.50
The Challenge harness is built for group-use activities like ropes courses, indoor and outdoor climbing as well as mountaineering. It is an adjustable unpadded harness with three auto locking buckles. A single visible attachment point, closing of the waist on the right side, and two different leg colors for ease and speed of use.
Learn More -
Removable Climbing Hold - Flush Mount -Removable Hold - With Bracket - Concrete$68.95
Removable climbing holds have been machined not to overlap the baseplate. Building this product is a complicated process using climbing holds intentionally designed for the baseplate and key. We recommend you purchase this fully assembled version.
If a climbing hold overlaps the baseplate, it will not meet commercial playground standards. Other products in the industry have their climbing holds overlapping the baseplate.
Once the base plate is attached to your wall, no tools are required to remove and reinstall the hold assembly. A removable climbing hold is ideal when your wall is not in use and you must prevent access to meet ACCT/CPSI standards.
To install, screw the baseplate to the wall, insert the key/climbing hold into the top of the slot and slide the climbing hold down to the bottom of the bracket.
- Plate dimensions are 4-3/4" at the widest x 6-1/2" tall.
- One rock climbing hold and bracket assembly included.
- This product comes fully assembled and includes attachment screws.
- Insert into the slot and slide down to lock in place.
- Slide up and lift out of the slot for easy removal.
- Ten different designs, which are all jugs.
- Large base plate to accommodate large holds and meet ASTM, ACCT, CPSI, and CSA standards.
-
Rope Cutter: Replacement BladesAs low as $8.24This professional heavy-duty cutter cuts and fuses ends of polyester and nylon ropes and web quickly. Learn More
-
Edelrid Jay II Harness$71.94The Jay is the perfect all-rounder with adjustable leg loops for all types of climbing. Learn More
-
Edelrid Cyrus Harness$131.94Probably the most comfortable harness money can buy, with 3D-Vent Technology for unparalleled wear comfort. Whether sport routes or longer alpine climbs, the Cyrus is suitable for all conditions. Learn More
-
-5%RESCUE FIGURE 8Special Price $42.80 Regular Price $44.99
The Rescue Figure 8 is a special figure 8 for rescue situations and fast rappeling. It has a special shap for multiple rope locking, allows rappeling with heavy loads, has a high strength, and fits a wide range of rope diameters. Available in light alloy or stainlees steel.
- Weight: 154g, 5.43oz (alloy) 451g, 15.9 oz (stainless steel)
- Material: Light alloy or stainless steel
- Strength: 40kN
-
Petzl Spiky Plus$41.94Anti-slip soles, adaptable to all shoe sizes, used for moving over snow and frozen or slippery surfaces. Learn More
-
Petzl Delta Quick Link$8.34When closed with a wrench, this steel quick link becomes a semi-permanent anchor ring. Learn More
-
Edelrid Solaris Woman Harness$143.943D-Vent women’s harness. Our fully-adjustable Solaris women’s harness features EDELRID 3D-Vent Technology and is specially designed to fit the female anatomy. Learn More
-
Edelrid Wing Harness$95.94Comfortable alpine harness with adjustable leg loops and laminated harness construction. Learn More
-
Hyper Rack Extreme Rappelling Descender$114.00The handy alternative for shorter drops or lighter loads. To reduce weight, the rack is drawn from 5/16" stainless steel, and the solid bars are formed from anodized aluminum. Learn More
-
Petzl Sequoia Attachment Bridge$27.54Attachment bridge for connection to the two gated rings of the SEQUOIA and SEQUOIA SRT arborist seat harnesses, to improve lateral mobility. Learn More
-
Petzl Pro Traxion$173.94The PRO TRAXION progress capture pulley is designed to allow rope installation while the pulley is connected to the anchor. With its large diameter sheave and great efficiency, it is particularly appropriate for hauling heavy loads. Learn More
-
Joko Lanyards by PetzlAs low as $27.54Joko I & Y Lanyards, These are used in traditional via feratta settings as well for park staff. For participants, however, we recommend the use of an "Always On" system. Learn More
-
KONG HYDROBOT Rappel/Belay Devices$58.00Hydrobot is a new tool conceived for Hydrobot is a new tool conceived for modern canyoning; can be used both with one or two ropes and it allows an easy changement of the braking under load. Learn More
-
Petzl Swan Easy-Fit Full Body Harness$169.95
Durable, easy-to-use full-body harness for adventure parks
Learn MoreSWAN® EASYFIT STEEL is a full-body harness designed for adventure parks. Its straps are color-coded to make donning easier. It is equipped with a FAST LT PIN-LOCK buckle to secure harness fastening; the PIN-LOCK locking system can only be opened by the guide with a special tool. The raised position of the connection point limits the risk of the client flipping. Its durability makes for easy maintenance and extended product life. Its single size and identification areas simplify equipment inventory management.
Detailed description
- Very easy to use full-body harness designed for adventure parks:
- Easy to install on the client, with FAST buckles at the rear of the harness
- Right/left color coding makes it easier to give donning instructions to clients
- Self-locking DOUBLEBACK buckles for quick and easy adjustment
- Excellent grip on webbing ends facilitates adjustment, even with gloves - Protects the client during progression:
- FAST LT PIN-LOCK waistbelt buckle can only be unlocked with a special tool, limiting the risk of the participant opening the buckle
- Wide ventral attachment point is color-coded green, making it easier to install the JOKO or AVENTEX lanyards and allowing for a quick visual check; the raised position of the attachment point limits the risk of the client flipping
- Anatomical design is close-fitting yet allows optimal freedom of movement
- Two side equipment loops make it easy to carry lanyard connectors - Excellent durability for easy maintenance and extended product life:
- Durable metal attachment point
- Webbing designed for intensive use and smooth adjustment - Easy equipment management for guide or monitor:
- Single size, adapts to most body types
- Marking area on the outside of the harness for easy identification when stored
- Identification panel integrated in the harness to track the equipment throughout its lifespan
- Easy to clean - Accessories to adapt the harness according to need:
- Leg loop foam for greater comfort when hanging for long periods of time
- CARITRAC stowing accessory to easily stow TRAC trolleys - Comes with an unlocking tool for the FAST LT PIN-LOCK buckle which can be easily carried on the guide’s harness
- Available individually or in packs of five
Specifications
- Material(s): Polyester webbing, aluminum attachment point, steel buckles, nylon
- Certification(s): CE EN 12277 type A, UIAA
- Weight per unit: 1125 g
- Waist belt: <120 cm
- Leg loops: <75 cm
- Stature: <200 cm
- Very easy to use full-body harness designed for adventure parks:
-
Petzl FRACTIO Caving Harness$128.95A comfortable, durable caving harness with metal attachment points. The FRACTIO's double belt is very comfortable and the aluminum attachment points are specially designed for comfort and ease of use. Learn More
-
Petzl Catch$5.94Catch for PANTIN foot ascender, helps to keep the rope in the device during rope ascents. It is available for PANTIN in right- and left-foot versions. Learn More
-
Petzl Ouistiti Childs Harness$69.95The Petzl Ouistiti Kids Climbing/Zipline Harness works for children from 4 to 9 years old and gives your future rock star/zipliner a safe start on top rope laps. Learn More
