Search results for: 'carabiner steel 3 sleev locking carabiner'

Klein Tools' Lineman's Wrenches are forged from special bar steel and heat-treated for durability and long life. These wrenches are designed for use on heavy three-bolt guy clamps where clearance is limited. Each end has two different size openings, plus a hole at the larger end for turning-in standard pole steps.

• Forged from special bar steel and heat-treated for long life
• Each end has two different size openings
• Small end has 5/8-Inch and 13/16-Inch openings; large end features 29/32-Inch and 1-3/32-Inch openings
• Hole is provided at larger end for turning-in standard pole steps
• Made in USA
• Wrench is suited for use on the heavy three-bolt guy clamps on which clearance is limited
• Dark blue painted finish

Learn More

Openable even when attached to the anchor, the PRO pulley is designed for maximum simplicity when setting up hauling or load deviation systems. Learn More

Petzl Pantin Ascender, A big advantage for long rope ascents. With the Pantin Ascender supporting the foot, the body is held in a more upright position thus making the ascent faster and less tiring for the arms. Learn More

The Head Rush Lightspeed EZ Clip Zip Line Trolley’s split-second, one-handed installation (just press the trigger against the zip line) will make your guides happy and increase throughput. Learn More

Peguet Maillon Rapide Delta quick links in plated steel and stainless steel. Bulk packaged.

• 10mm Weight: 153 grams. Strength: 45kN CE

Learn More

The Impact Surface Replacement Kit allows you to replace the Impact Surface on your Impact Trolley should it wear out or become damaged. Learn More

Kong Futura Hand Ascender, It is extremely small though easy to use, weighs only 125g, and comes with two different sized handles for ergonomic customisation Learn More

The Head Rush Impact Trolley Handle Replacement Kit allows you to replace your Impact Trolley T-Handle handles should they wear out. Learn More

These are the basic model with NO snap hooks or Zorber. These are only appropriate for clipping in to protection with some dynamic load absorbing features like rope or fairly slack cable such as a belay cable on a high ropes course or zipline. Learn More

Designed to be used in conjunction with any seat harness. The Challenge Chest harness increases user safety by reducing the likelihood of an upside down fall. The 3 buckle system allows the harness to be adjusted quickly and easily.

• Weight: 350 grams
• Number of buckles: 3
• CE and UIAA Certified

Learn More

The Zippey Trolley is bi-directional, so there’s no wrong way to fit it. Zippey offers a one handed action with either a single or double locking mechanism for increased safety.

Zippey has a speed rating of 60mph (90kph), which is based on the use of the same high spec deep groove, double row ball bearings, as used in our Zipspeed range. The expected life of the bearings should be more than 1000 miles (1500km).

Accessories available for the Zippey Trolleys

ARC – Anti Roll Back Cam. This innovative add on solves many of the issues associated with modern zip lines. Riders who reach the egress platform can roll back out onto the line requiring staff intervention. The ARC ensures that the rider remains in position over the egress platform by camming against the zip line cable maintaining their position.

Handle Accessory – There is now an available handle accessory for the Zippey making it possible for riders to ‘steer’ into the arrival station.

Learn More

PANJI adventure park/zipline harness is a one size harness covering a very wide range of body sizes. Learn More

Wider waist pad! Voyager Riggers Harness now comes with same width waist pad as Rope Access Harness. For professional use in stage rigging and construction applications where a lightweight Class III harness with positioning rings and multiple attachment points are desired. Learn More

The GRIGRI 2 belay device with assisted braking is designed to facilitate belay maneuvers. Learn More

Removable climbing holds have been machined not to overlap the baseplate. Building this product is a complicated process using climbing holds intentionally designed for the baseplate and key. We recommend you purchase this fully assembled version. 

If a climbing hold overlaps the baseplate, it will not meet commercial playground standards. Other products in the industry have their climbing holds overlapping the baseplate. 

Once the base plate is attached to your wall, no tools are required to remove and reinstall the hold assembly. A removable climbing hold is ideal when your wall is not in use and you must prevent access to meet ACCT/CPSI standards. 

 

To install, screw the baseplate to the wall, insert the key/climbing hold into the top of the slot and slide the climbing hold down to the bottom of the bracket. 

 

• Plate dimensions are 4-3/4" at the widest x 6-1/2" tall.
• One rock climbing hold and bracket assembly included. 
• This product comes fully assembled and includes attachment screws.
• Insert into the slot and slide down to lock in place.
• Slide up and lift out of the slot for easy removal.
• Ten different designs, which are all jugs. 
• Large base plate to accommodate large holds and meet ASTM, ACCT, CPSI, and CSA standards.

Learn More

Compact belay device with assisted braking for lead climbing or top rope. All metal construction with cam and friction components in stainless steel for great durability. The rope exits following the device’s axis to avoid twisting. The BIRDIE can be used with all dynamic single ropes from 8.5mm to 11mm.

• All steel construction
• Compatible with ropes from 8.5mm to 10.5mm
• Weight: 210g 7.4 oz

Learn More

• The Franklin seat provides more long-term comfort over the course of a long workday than hanging in a harness does.
• Excellent additon for use with accessability and universal climbing programs
• It is intended for use with Singing Rock's fall arrest or work positioning harnesses or equivelant.
• It is easy to adjust with Rock and Lock buckles.
• Wide sitting area ensures good stability and allows for comfortable hanging, as well as standing work positions.
• Three D-rings (bearing capacity 50kg) for gear suspension.
• Weight: 1650 grams/58 oz

Learn More

The Head Rush zipSTOP Braking System. This zipSTOP Brake Trolley is engineered for a fine balance. It is able to handle the abuse of heavy impact collisions, yet light enough to increase the odds of reliable reset. Learn More

By incorporating a rigid stem on this belay/rappel device, climbers go from full lock-off to whipping out rope in a single, smooth action. No more binding up as the device tries to free itself. The amount of friction can be easily adjusted to suit your particular need. Climbing with fat ropes, a skinny partner or on low-angle slabs? Belay with the U-Grooves and clip into the bottom hole of the XF Forge for less friction. For the ultimate control, wrap that skinny cord around the rigid stem and rappel, figure-8 style.

Learn More

The Felco C16 Wire Cutter has a capacity of 5/8 in. diameter and smaller. This is the GO-TO zipline cable cutter in the industry. Felco cutters keep cutting for years longer than other cable cutters. Learn More

This Cable Spooler is Made of sturdy heavy-duty steel tubing and folds for easy storage and had a tough, durable finish.

• Maximum reel width: 18";
• Height from floor to rod: 13"
• Weight: 7.5lbs;
• Holds: 200lbs.

Learn More

CMI "Beast" Tour Trolley Pulley, Designed for the fast lane of zip line tours, this trolley features a front bumper, reinforced 'crimped' side bars and forward facing design with drop down handles. Learn More

Our new Ultrascenders are designed to be the most convenient and easy to use ascenders around. We've added a new ergonomically designed safety mechanism which is integrated into the handle channel for maximum ease of use in those long "over the lip" stretches. Learn More

These splicing fids are used to make splicing rope easier. Fid is made from stainless steel and hardwood.  Comes in two sizes

Small: for rope sizes up to 58"

Large: for rope sizes 5/8" and larger

Learn More

Our new Ultrascenders are designed to be the most convenient, easiest to use and most comfortable ascenders around. We've added a new ergonomically designed safety mechanism which is integrated into the handle channel for maximum ease. Learn More

Attachment bridge for connection to the two gated rings of the SEQUOIA and SEQUOIA SRT arborist seat harnesses, to improve lateral mobility. Learn More

A great harness for group users such as clubs, schools and camps. A great value in a fully adjustable harness. Easily adjustable harness with a single tie in point.

• Weight: 400 grams
• Number of buckles: 3
• Gear loops: 0
• Single reinforced tie in
• Universal size fits up to 47" waist.
• CE and UIAA Certified

Learn More

STARGATE SRD -Shear Reduction Device, The 4" aluminum sheave is hard anodized and pared from any excess weight, while the stainless frame surrounds the sheave with minimal surface contact Learn More

The Felco C112 Cutter features maximum force transmission which applies the maximum leverage at just the right moment. This coupled with Swiss precision blades make this cutter very easy to use. Learn More

Holds the connector in place and protects the webbing from abrasion. Available in two sizes. Learn More

The Cadillac is versatile enough to be used on big walls,zip line, but shines brightest on multi pitch and traditional routes. Constructed wide for comfort, the Cadillac incorporates an inner waist belt layer that spreads forces over 2.7 times more area Learn More

Petzl CONNEXION VARIO Adjustable anchor strap Learn More

The SAMA harness is ideal for sport climbing and zip lining . With its EndoFrame construction, it provides excellent weight distribution around the waist and legs to ensure greater comfort. Learn More

CONNEXION FAST Rapid adjust anchor strap Learn More

 Rescue Swivel helps to eliminate twisting in critical lines due to load rotation. Its 9000lb (40kN) MBS gives you piece of mind when moving the heaviest of loads, and its sealed ball bearing will keep it operating smoothly for years.

*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition.  *Not Certified*

Size: 4 1/4" x 1 3/4"
Weight: 5.6 oz
Breaking Strength: 9,000 pounds

Learn More

Brakehawk Zip Line Brake Pads Learn More