Search results for: 'go rope cut and x y'
-
5/8" Zip Pulley lanyardAs low as $22.30
Multiline 3-Strand Spliced Rope Zip Line Lanyards (tethers). Plastic teardrop shaped thimble on each end.
Learn More -
Liberty Mountain Guide HarnessSpecial Price $38.95 Regular Price $42.95
A proven winner for the ropes course. Double-back buckles on the legs and waist.
One Size Fits Most
Learn More -
Removable Climbing Hold - Flush Mount -Removable Hold - With Bracket - Concrete$68.95
Removable climbing holds have been machined not to overlap the baseplate. Building this product is a complicated process using climbing holds intentionally designed for the baseplate and key. We recommend you purchase this fully assembled version.
If a climbing hold overlaps the baseplate, it will not meet commercial playground standards. Other products in the industry have their climbing holds overlapping the baseplate.
Once the base plate is attached to your wall, no tools are required to remove and reinstall the hold assembly. A removable climbing hold is ideal when your wall is not in use and you must prevent access to meet ACCT/CPSI standards.
To install, screw the baseplate to the wall, insert the key/climbing hold into the top of the slot and slide the climbing hold down to the bottom of the bracket.
- Plate dimensions are 4-3/4" at the widest x 6-1/2" tall.
- One rock climbing hold and bracket assembly included.
- This product comes fully assembled and includes attachment screws.
- Insert into the slot and slide down to lock in place.
- Slide up and lift out of the slot for easy removal.
- Ten different designs, which are all jugs.
- Large base plate to accommodate large holds and meet ASTM, ACCT, CPSI, and CSA standards.
-
RESCUE FIGURE 8Special Price $42.80 Regular Price $44.99
The Rescue Figure 8 is a special figure 8 for rescue situations and fast rappeling. It has a special shap for multiple rope locking, allows rappeling with heavy loads, has a high strength, and fits a wide range of rope diameters. Available in light alloy or stainlees steel.
- Weight: 154g, 5.43oz (alloy) 451g, 15.9 oz (stainless steel)
- Material: Light alloy or stainless steel
- Strength: 40kN
-
ARC Universal Full Body HarnessSpecial Price $530.00 Regular Price $545.95
The original Adaptive Ropes Course harness, the ARC allows all participants to experience challenge courses and ziplines, without regard to physical ability. Designed especially for participants with physical challenges, the ARC features a thickly padded, rigid seat, with integrated chest and pelvic harnesses, secure four point attachment system and dorsal head panel, providing a safe, comfortable harness for experiencing modern ropes courses.
*ARC Spreader Bar sold separately*
Learn More -
RP105 Heavy Duty 3" Pulley$113.50
Stainless steel sideplates, 3"aluminum sheave, bushing, and stainless steel axle.
MBS
Rope Capacity
Size
Weight
Efficiency
16000lbs
5/8"
6.5x4.25in
1.35lb
92.1%
-
CMI RP117 2" Stainless Steel Service Line Pulley$66.50
Stainless steel sideplates, 2" aluminum sheave, needle bearing, and stainless steel axle.
MBS
Rope Capacity
Size
Weight
Efficiency
8000lbs
1/2"
5x2.5in
0.5lb
90.6%
-
RC 102 Cable Able Pulley$83.50
Black anodized aluminum sideplates, 2 3/8" zinc coated steel sheave, bushing, and stainless steel axle.
MBS
Cable/Rope Capacity
Size
Weight
Efficiency
6000lbs
5/8"
4.375x3.5in
0.75lb
91.4%
-
Para-Cord / P-Cord Rainbow - 3000' Spool$219.00
This rainbow para cord is ideal for lazy lines (or haul lines) on ropes courses and climbing walls, as well as general use. Kernmantle construction for high strength and low stretch. 350 lb strength rating. 1/8" (3mm). Made in the Mexico.
Learn More -
Para-Cord / P-Cord Black- 3000' Spool$219.00
This rainbow para cord is ideal for lazy lines (or haul lines) on ropes courses and climbing walls, as well as general use. Kernmantle construction for high strength and low stretch. 350 lb strength rating. 1/8" (3mm). Made in the Mexico.
Learn More -
Petzl P58 SO Open Gated Swivel with Sealed Ball Bearings, Yellow/Black$79.95
The SWIVEL OPEN gated swivel features a wide opening and thus can be attached to a range of products (pulleys, lanyards). It reduces the bulk and weight of component systems and solves the twisting and tangling problems of ropes and lanyards. Sealed ball bearings offer excellent performance and reliability.
Learn More -
Edelweiss Challenge Sit HarnessSpecial Price $47.50 Regular Price $49.50
The Challenge harness is built for group-use activities like ropes courses, indoor and outdoor climbing as well as mountaineering. It is an adjustable unpadded harness with three auto locking buckles. A single visible attachment point, closing of the waist on the right side, and two different leg colors for ease and speed of use.
Learn More -
SINGING ROCK TARZAN HARNESS$279.95
Full adjustable full body harness intended for rope courses and adventure parks. Speed buckle on the shoulder straps for quick on and off.
- Weight: 1530 grams/54 oz
- Easy to put on and take off
- Shoulder straps connect with Speed Buckle
- Padded waist belt and legs
- Buckle with captive bar matches ANSI and CSA standards
- CE 1019, EN813, EN361
-
ISC R-ALF 5:1 Mechanical Advantage Haul / Rescue Kit$1,528.00
RSRP431 R-ALF Rescue Hauler Pulley- 2 Way Auto Locking Approved standards CE 0120 ANSI Z359 :4: 2007
The R-ALF Pulley is the latest innovation in Accessability, Rescue, Confined Space working and Work Suspension Systems. The R-ALF Pulley has an over-speed brake built in so that the Pulley will lock on and hold when a fall occurs. The load rated Becket Eye on the R-ALF means that it can be used in combination with Prussic Pulleys to create a 3: 1 or 5: 1 Mechanical Advantage System. The unique design of the R-ALF (design patent applied for), means that an internal brake is not required and therefore it is capable of several thousand cycles and many arrests (minimum 12 monthly service intervals apply). Weight (grams) 1200 Weight (ounces) 43 Rope diameter range (mm) Approved 11mm EN1891-A Ropes Only Number of persons 2
Learn More -
D4 Rescue Descender$295.95
The D4 Work/Rescue Descender features a unique and innovative cam action, which offers precise control at slow or fast speeds. The progressive cam works by way of one cam operating inside another cam. The D4 is the only ANSI certified descender on the market today.
- Weight: 655 grams (23 ounces)
- Strength: MBS 16kN (3597lbf)
- For use with single ropes from 10.5 - 11.5mm (7/16")
- Working Load Rating (WLL): 240kg (551lbs.)
- Certifications: CE EN12841, NFPA 1983, ANSI Z359
-
Robertson Zip Tour Trolley - Professional Zip Line TrolleyAs low as $300.00A practical zip line tour trolley for professional zip line tours and canopy tours. The ultra-long design provides superior stability and travel on any zip line at any speed. Learn More
-
Petzl I'D Belay Device DescenderAs low as $319.95The Petzl ID is a self-braking descender with an anti-panic function built in. Learn More
-
GriGri 2 Belay Device$99.95The GRIGRI 2 belay device with assisted braking is designed to facilitate belay maneuvers. Learn More
-
MISTY MOUNTAIN CHALLENGE HARNESSAs low as $75.00
Misty Mountain Challenge Harness – has quick adjust waist and leg buckles. Designed specifically for climbing gyms, ropes courses and challenge towers, the Challenge Harness is simple to use, safe and durable. It features a single reinforced tie-in point and pre threaded, quick adjust waist and leg loop buckles. The single tie in point, along with the quick adjust waist and leg buckles, provide for a quick set up and the durable components ensure much hard wear. Quick and convenient, the Challenge Harness is a great all around program harness.
Youth: Green tie-in point
Learn More
Standard: Blue tie-in point
X-Large: Black tie-in point -
Petzl ZigZag Prusik$335.94Petzl ZigZag Prusik The linked rings provide precision and fluidity when moving around. The pulley is mounted on ball bearings to allow the slack to be taken up easily. Learn More
-
Redirection Pulley$105.60The Redirection Pulley is the first pulley of its kind for the zip line industry; lightweight, corrosion-resistant and specially engineered to be virtually resistant to snagging. Learn More
-
CMI MICROTROLLEY PULLEY$129.95The CMI Velocity Micro Zipline trolley is a fast zip line trolley that is small and light weight. Stainless steel side plates assure long life and minimal wear. Learn More
-
CMI SRD Shear Reduction DeviceSpecial Price $129.50 Regular Price $153.90This is a great low profile SRD with a parallel attachment to easily align cable and belay loading. Super strong with a triple axle design and a thick folded plate design. Learn More
-
Petzl Jag Traxion$161.94Double progress capture pulley designed for use with the JAG double pulley to make a 4:1 haul system. Sheaves mounted on sealed ball bearings for excellent efficiency. Learn More
-
Cable Clamps: Stainless Steel Cable ClampsAs low as $9.50Stainless Steel Cable clamps are ideal for use in salty and acidic environments like zip lining close to oceans or salt lake. These are durable and outlast Drop Forged clamps in harsh environments. Learn More
-
CMI Highline Knot Passing Pulley$243.95The smallest and strongest knot passing pulley on the market today! With an incredible MBS of 15,000 lbs and high strength stainless steel, our knot passing pulley puts the others to shame. Learn More
-
-
Kong Pro Cave Ascenders$117.00Designed by top cavers for tight places in the most remote areas on earth (or under it). Surprisingly simple the new designs are comfortable to use thanks to the ergonomic grips. Learn More
-
Petzl Caterpillar Edge Protector$179.94Petzl Caterpillar Edge Protector, The Caterpillar Edge Protector can be positioned independently to adapt to whatever the terrain throws at you Learn More
-
HAULERBINER RESCUE KIT 300 CMSpecial Price $354.00 Regular Price $391.95
The HaulerBiner Compact Rescue Kit is a lightweight, compact and simple to use/deploy device. The HaulerBiner is fully rated for lifting people. The HaulerBiner has three pulley wheels incorporated into each carabiner, creating a compact and lightweight 6:1 or 7:1 (theoretical) mechanical advantage system. The HaulerBiner also has a purpose-designed progress capture cam with, an ‘on/off’ position. The HaulerBiner utilises purpose-developed 6mm (1/4") rope, for strength and easy handling/best grip. The kit is supplied in a two-pouch bag, for easy deployment. The HaulerBiner is load rated to 140kg (310lbs) but it has an MBS of at least 16kN/3500lbs tested as a complete system. The length of the system, when fully contracted is only 32cm (12"). EN 12278, EN 567 certifications
Learn More -
Yates Figure Eight Chest Harness$49.95Yates Figure Eight Chest Harness, Great for use on zip line operations. Attachment points at waist and between shoulders. Safety attachment at rear of waist. Padded waist belt. Super easy to get on and adjust. Learn More
-
Petzl Jag Rescue Kit$935.94Ready-to-use reversible rescue kit designed to easily pick off and lower a victim. Learn More
-
Omega Pacific Figure 8 Belay/Rappel Device$22.95The Figure 8 by Omega Pacific remains a popular device for their simplicity, durability and dependability. Learn More
-
Edelrid Mega Jul$43.14Our most versatile belay and abseil device made of solid stainless steel for durability. Learn More
-
Petzl Corax Harness$71.94The CORAX is the versatile harness par excellence: easy to use and comfortable, it is designed for rock climbing, mountaineering or via ferrata. Learn More
-
Petzl Jag$107.94Double pulley designed for use with the JAG TRAXION double progress capture pulley to make a 4:1 haul system. Sheaves mounted on sealed ball bearings for excellent efficiency. Learn More