Search results for: 'size mount climbing rope'

The adjustable FOOTCORD foot loop is used with an ASCENSION or BASIC rope clamp for rope ascents. Its 100 % Dyneema® construction increases durability. Learn More

Yates Adjustable Daisy Strap, The buckle axle is riveted for added security and strength. Contoured webbing eye at carabiner clip attachment end. This configuration allows the strap more rotation, thus reducing jamming in corners. Learn More

A compact, ultra-light belay and abseil device for half ropes and twin ropes. The only suitable device for use with the Flycatcher 6.9 mm. Learn More

Petzl Simple Descender, The hand holding the free end of the rope is used to control or stop the descent. In narrow pitches, the Simple Descender has the advantage of being able to follow along the rope on its own, without manipulation. It is for use with ropes from 9 to 12 mm. Learn More

Catch for PANTIN foot ascender, helps to keep the rope in the device during rope ascents. It is available for PANTIN in right- and left-foot versions. Learn More

Petzl ASAP Fall Arrest Device, In normal use, the device moves freely along the rope without any manual intervention and accompanies the user in all his movements. Learn More

Fully adjustable full body harness intended for rope courses and adventure parks.

• CE 1019, EN12277, EN161
• front attachment point for belaying and rappeling according to EN 12277 type C
• waist belt and the leg loops without the padding enables to put the harness to every person
• rear steel D-ring with a bearing capacity of 15 kN according EN 361
• waist belt, shoulder straps and the leg loops are easily adjustable with easy lock buckles
• red webbing strap stitched into the buckles simplify handling with them
• all steel components are finished with E-coating technology for higher corrosion resistance
• left leg loop with red color helps to put the harness on
• waist belt webbing is in red as well for easier orientation in the harness
• dorsal plastic plate with different color according the size of the harness (S – yellow, UNI – red)
• construction ensures long-time operation and efficiency (easy releasing and fastening even when dirty and tough webbing)
• Rear dorsal plate for easy size identification. Yellow = Small. Red = Universal Sizing
• Weight: 1050g
• Size: S (110-150cm/43.3in -59in)/UNI (150cm-200cm/59in-79in)

Learn More

Petzl Swivel, Positioned between the rope and the load, the ball-bearing Swivel S allows the load to turn without twisting the rope. Learn More

Torse Shoulder Strap, The TORSE shoulder strap allows the CROLL ventral rope clamp to remain correctly positioned in order to optimize efficiency and comfort during rope ascents. Learn More

Originally designed for single rope descents in caving, the Stop has become a standard tool for the rope access worker. The Stop is designed to automatically "stop" the descent when the red handle is not depressed. Learn More

Firecracker Ladders are made with ¾” polydac rope with 12” center notched 1 ¼” diam hardwood dowels spaced and lashed at 18” intervals. Very challenging. Metal eye top and rope eye bottom.

 

Sold by: Linear Ft.

Learn More

Asymmetrical Y-shaped sewn lanyard made of flat webbing, * Used with an ASCENSION handled rope clamp for progression on a rope, * Asymmetrical Y-shape for ease of movement: Learn More

Fully adjustable harness with a single tie-in point. The top uses the Rock&Lock buckle system that improves fit and performance. Suited for challenge courses, indoor gym climbing or as a lightweight mountaineering harness.

• Weight: 366 grams 12.4 oz
• Number of buckles: 3
• Reinforced tie in
• Drop seat
• CE and UIAA Certified

Learn More

Figure 8 descender, compact and lightweight. Square shape helps reduce rope twist. Learn More

The Head Rush zipSTOP Braking System. This zipSTOP Brake Trolley is engineered for a fine balance. It is able to handle the abuse of heavy impact collisions, yet light enough to increase the odds of reliable reset. Learn More

These are the basic model with NO snap hooks or Zorber. These are only appropriate for clipping in to protection with some dynamic load absorbing features like rope or fairly slack cable such as a belay cable on a high ropes course or zipline. Learn More

Lanyards are used for protection on high zip lining, ropes courses, adventure courses, industrial heights and a variety of home applications. These are designed to meet the standards of high ropes course/zip line protection and many industrial requirements. Learn More

 Rescue Swivel helps to eliminate twisting in critical lines due to load rotation. Its 9000lb (40kN) MBS gives you piece of mind when moving the heaviest of loads, and its sealed ball bearing will keep it operating smoothly for years.

*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition.  *Not Certified*

Size: 4 1/4" x 1 3/4"
Weight: 5.6 oz
Breaking Strength: 9,000 pounds

Learn More

Steel carabiners are referred in ropes course, zip line, and cable applications. Learn More

The Kong X-Large Carabiner is ideal for big wall and belay stations where rope management is vital. The X-Large has a large amount of clearance, leaving you plenty of room for daisy chains and ropes. Learn More

It provides increased friction for single ropes when rappelling or lowering, without extra gear or the need to open the carabiner Learn More

These lobster Claws are a unique, non-adjustable set of positioning / safety lanyards designed specifically for program high ropes courses. Learn More

The PIRANA descender offers multiple braking options and can be installed on the rope without removing it from the harness. Designed for use with canyoning descent techniques. Learn More

1-3/4" Nylon Webbing Ajustable Lanyards are used for protection on high ropes courses, adventure courses, industrial heights and a variety of home applications. Learn More

Simple to use and ergonomic, the RESCUCENDER is an openable cam-loaded rope clamp designed for use in haul systems as a tractor or progress capture device. Learn More

Compact self-braking descender, Lock off and work with minimum gear to tangle. The Petzl Rig is a proven performer for the zip line and ropes course construction industry. Learn More

Petzl Basic Ascender, The BASIC is a compact ascender that offers excellent grip for rope ascents. The lower attachment hole is large enough to hold the carabiners for the lanyard and the footloop. Learn More

The Guide Bag was developed and designed by professional guides. A waist worn bag with 70' of rope meets the requirements for professional operations and insurance. Learn More

The 1/4, 5/16, and 3/8 Swaging Tools are designed for crimping copper and aluminum oval sleeves and stop sleeves on zip lines, life lines,ropes course elements. Learn More

Compact and light first aid bag with reflective zippers for increased visibility and easy access. The inside is designed with different size compartments and zippered mesh pocket. Velcro attachment loops allow easy and safe attachment to a harness or backpack. Includes an emergency whistle. First Aid contents are not included.

• Size: 13 cm x 10 cm x 5 cm

Learn More

Liberty Large Steel "D" Carabiner . Large gate opening (1"). Big basket! Great for clipping lots of things at once or clipping into bulky harnesses or large diameter ropes. Learn More

Petzl's Coudee hanger holds the carabiner perpendicular to the rock face, holding the rope away from the rock. The hanger includes an 8mm bolt. Learn More

Petzl Croll Ascender, The CROLL chest ascender is unmatched for efficiency on fixed lines. Compact and lightweight, it does not interfere with progression. The stainless steel wear plate improves durability by reinforcing the rope friction zone. Learn More

Hydrobot is a new tool conceived for Hydrobot is a new tool conceived for modern canyoning; can be used both with one or two ropes and it allows an easy changement of the braking under load. Learn More

Petzl PROTEC Flexible protection, Helps protect a fixed rope from abrasion, Lightweight, durable PVC sheath, Velcro® closure and clip for easy and quick installation Learn More

• The Franklin seat provides more long-term comfort over the course of a long workday than hanging in a harness does.
• Excellent additon for use with accessability and universal climbing programs
• It is intended for use with Singing Rock's fall arrest or work positioning harnesses or equivelant.
• It is easy to adjust with Rock and Lock buckles.
• Wide sitting area ensures good stability and allows for comfortable hanging, as well as standing work positions.
• Three D-rings (bearing capacity 50kg) for gear suspension.
• Weight: 1650 grams/58 oz

Learn More