Search results for: 'step01 rescue 8 belai device'

Write, type, or stamp information on the ¾ x 1 inch white area. Clear self-laminating portion wraps around to protect writing. Learn More

Fully adjustable full body harness intended for rope courses and adventure parks.

• CE 1019, EN12277, EN161
• front attachment point for belaying and rappeling according to EN 12277 type C
• waist belt and the leg loops without the padding enables to put the harness to every person
• rear steel D-ring with a bearing capacity of 15 kN according EN 361
• waist belt, shoulder straps and the leg loops are easily adjustable with easy lock buckles
• red webbing strap stitched into the buckles simplify handling with them
• all steel components are finished with E-coating technology for higher corrosion resistance
• left leg loop with red color helps to put the harness on
• waist belt webbing is in red as well for easier orientation in the harness
• dorsal plastic plate with different color according the size of the harness (S – yellow, UNI – red)
• construction ensures long-time operation and efficiency (easy releasing and fastening even when dirty and tough webbing)
• Rear dorsal plate for easy size identification. Yellow = Small. Red = Universal Sizing
• Weight: 1050g
• Size: S (110-150cm/43.3in -59in)/UNI (150cm-200cm/59in-79in)

Learn More

The KAA is a self contained mechanical advantage system for tensioning lines or lifting people during rescues. In addition, as the KAA is certified to EN 354, it can be used for workplace stabilization, as a restraint system (open/closed), and for controlled lowering. Its strap-based construction makes it the most compact and lightweight system on the market. Depending on the orientation, it offers a 4:1 or 5:1 lifting ratio with an efficiency of 91%. The KAA is packaged compactly and ready for immediate use, so that no valuable time is lost when it is required. A swivel is provided at each end to prevent the system from twisting. The hand lever on the draw cord makes it easier to pull and can also be used as a lowering lever.

 

Weight: 500g (1.1lbs)

MBS: 22kN

Certification: EN 354

Efficiency: 91%

• Compact and lightweight due to strap-based construction
• 4:1 or 5:1 mechanical advantage
• Can be set up in seconds
• Swivels on both ends

Learn More

Knot-passing pulley allows passage of joining knots Large diameter sheave mounted on sealed ball bearings for excellent efficiency. Learn More

The SPIRIT is a non-locking progression carabiner, only for technical climbing. Because the SPIRIT does not lock, and has a Keylock system that prevents snagging, clipping is easier. Learn More

CMI Double Expedition Ascender, The cam is the same design as those in our now famous Ultrascenders and carries the same lifetime wear-out guarantee. Extra large handgrip opening easily accomodates gloved or mittened hands Learn More

Double pulley designed for use with the JAG TRAXION double progress capture pulley to make a 4:1 haul system. Sheaves mounted on sealed ball bearings for excellent efficiency. Learn More

They fit securely on a wide range of flange widths and beam sizes, with a built-in suspension bar that provides for close mounting. The clamp jaw design reduces flange stress by distributing the load away from the flange edge. Learn More

Double progress capture pulley designed for use with the JAG double pulley to make a 4:1 haul system. Sheaves mounted on sealed ball bearings for excellent efficiency. Learn More

The Felco C112 Cutter features maximum force transmission which applies the maximum leverage at just the right moment. This coupled with Swiss precision blades make this cutter very easy to use. Learn More

The adjustable leg loops of the LUNA harness make it an ideal piece of equipment for mountaineering, ziplining, and ice climbing. Learn More

Petzl Basic Ascender, The BASIC is a compact ascender that offers excellent grip for rope ascents. The lower attachment hole is large enough to hold the carabiners for the lanyard and the footloop. Learn More

Handled rope clamp designed for doubled rope ascents, the ASCENTREE has ergonomic handles allowing a comfortable and powerful grip when pulling. Learn More

Petzl Croll Ascender, The CROLL chest ascender is unmatched for efficiency on fixed lines. Compact and lightweight, it does not interfere with progression. The stainless steel wear plate improves durability by reinforcing the rope friction zone. Learn More

The VERTIGO TWIST-LOCK carabiner is designed for use on progression lanyards. Its ergonomic design and automatic locking system facilitate manipulations when passing intermediate anchors. Learn More

The CMI Velocity Micro Zipline trolley is a fast zip line trolley that is small and light weight. Stainless steel side plates assure long life and minimal wear. Learn More

Our Galvanized Aircraft Zip Lining Cable is made in accordance with Federal Specification RR-W-410D, meeting the dimensional and strength requirements of MIL-W-83420D. Learn More

Our Galvanized Aircraft Zip Lining Cable is made in accordance with Federal Specification RR-W-410D, meeting the dimensional and strength requirements of MIL-W-83420D. Learn More

Our Galvanized Aircraft Zip Lining Cable is made in accordance with Federal Specification RR-W-410D, meeting the dimensional and strength requirements of MIL-W-83420D. Learn More

Get the best selection and best quality of Cargo Climbing and Ropes Course Nets. Our nets and ladder are constructed of high quality materials and even higher quality workmanship. Learn More

Double sewn zip line tether is the only double zip line tether that meets all standards for ACCT, PRCA for professional zip line and canopy tours. Each tether exceeds the 5,000 lb minimum strength requirement. Learn More

The PRO TRAXION progress capture pulley is designed to allow rope installation while the pulley is connected to the anchor. With its large diameter sheave and great efficiency, it is particularly appropriate for hauling heavy loads. Learn More

Pulley carabiner, available in versions with or without TRIACT-LOCK locking system. Learn More

The Impact Trolley is the only trolley on the market engineered specifically for smooth and consistent impact braking with the zipSTOP Zip Line Brake system. Learn More

A practical zip line tour trolley for professional zip line tours and canopy tours. The ultra-long design provides superior stability and travel on any zip line at any speed. Learn More

GUY ANCHORS- Helix Ground Anchors : 4" x 3/4" x 54" Learn More

GUY ANCHORS- Helix Ground Anchors : 10" x 1-1/4" x 96" Learn More

GUY ANCHORS- Helix Ground Anchors : 6" x 3/4" x 66" Learn More

Klein Tools' Lineman's Wrenches are forged from special bar steel and heat-treated for durability and long life. These wrenches are designed for use on heavy three-bolt guy clamps where clearance is limited. Each end has two different size openings, plus a hole at the larger end for turning-in standard pole steps.

• Forged from special bar steel and heat-treated for long life
• Each end has two different size openings
• Small end has 5/8-Inch and 13/16-Inch openings; large end features 29/32-Inch and 1-3/32-Inch openings
• Hole is provided at larger end for turning-in standard pole steps
• Made in USA
• Wrench is suited for use on the heavy three-bolt guy clamps on which clearance is limited
• Dark blue painted finish

Learn More

Lanyards are used for protection on high zip lining, ropes courses, adventure courses, industrial heights and a variety of home applications. These are designed to meet the standards of high ropes course/zip line protection and many industrial requirements. Learn More

The Slim Ratcheting Lineman Wrench works on four different square sizes, covering all of the common utility pole hardware. The long handle provides plenty of leverage and a tight ratcheting mechanism increases efficiency. The high visibility yellow socket includes a bolt-through design, enabling use on long bolts. Handle is fully integrated for durability.

Features:

• Ratcheting Wrench features four sizes in one tool (4-in-1)
• 3/4-Inch, 13/16-Inch, 1-Inch and 1-1/8-Inch combination square socket sizes
• Works on most common utility pole hardware, such as lag bolts, C clamps and suspension bolts
• Bolt-through design allows bolts to pass through the socket
• Fully integrated handle for durability and non-slip grip for comfort
• Tether hole to keep it connected when working at height
• Bright yellow socket for easy visibility

Specifications:

Learn More

It may be small, but don’t underestimate the Head Rush LightSpeed Micro Zip Line Trolley. Learn More

The Head Rush Lightspeed EZ Clip Zip Line Trolley’s split-second, one-handed installation (just press the trigger against the zip line) will make your guides happy and increase throughput. Learn More

A 3/4" Climbing Rope and/or a Swing Rope. We make our 3/4" Climbing/Swing Ropes with Multiline II Rope. Multiline II Rope is strong, durable and resistant to UV rays. Our 1-1/2" Ropes are made with Combo Rope, aka poly-dac rope, which is similar to Multiline. All of these ropes have a metal thimble at one end and a back-splice at the other end.We offer multiple lengths. If you require a length other than what we have listed; please give us a call at (877) 206-8967

Learn More

Used to support cross timbers for ropes course, challenge course, zip lines and industrial applications. Learn More