Search results for: 'hold heavi rope cutting guy'

This electric handheld unit cuts and fuses the ends of polyester and nylon ropes and webbing. Easy to use and long lasting blades. heats up when trigger is pulled and cools when released. Learn More

Deep Cut telephone Pole Auger Bits: 24", Super long 24" Pole Auger Bits for telephone poles, utility poles, treated poles, ropes course and zip line poles. Designed for making deep cuts in utility poles, pressure treated lumber, railroad ties, and wet or frozen lumber. Learn More

Nail Chipper Tri-Cut Auger Bits, Typically when drilling a hole for a through bolt as used in ropes course or zip line construction, you will need to drill a hole 1/16" bigger than the bolt you are using. 5/8" bolt requires a 11/16" hole. These are all 18" long bits. 7-1/2" are available by request. Learn More

When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More

Deep Cut Pole Auger Bits Learn More

Yellow 8' Guy Marker - Guy Guard Learn More

GUY ANCHORS- Helix Ground Anchors, Multiple sizes and capacities allow precise designs for the adventure and zip line industry. There may be one or multiple guywires that can be resisted by one or multiple guy wire anchors, dictated by design and load requirements. Learn More

Removable climbing holds have been machined not to overlap the baseplate. Building this product is a complicated process using climbing holds intentionally designed for the baseplate and key. We recommend you purchase this fully assembled version. 

If a climbing hold overlaps the baseplate, it will not meet commercial playground standards. Other products in the industry have their climbing holds overlapping the baseplate. 

Once the base plate is attached to your wall, no tools are required to remove and reinstall the hold assembly. A removable climbing hold is ideal when your wall is not in use and you must prevent access to meet ACCT/CPSI standards. 

 

To install, screw the baseplate to the wall, insert the key/climbing hold into the top of the slot and slide the climbing hold down to the bottom of the bracket. 

 

• Plate dimensions are 4-3/4" at the widest x 6-1/2" tall.
• One rock climbing hold and bracket assembly included. 
• This product comes fully assembled and includes attachment screws.
• Insert into the slot and slide down to lock in place.
• Slide up and lift out of the slot for easy removal.
• Ten different designs, which are all jugs. 
• Large base plate to accommodate large holds and meet ASTM, ACCT, CPSI, and CSA standards.

Learn More

GUY ANCHORS- Helix Ground Anchors : 8" x 1" x 66" Learn More

GUY ANCHORS- Helix Ground Anchors : 4" x 3/4" x 54" Learn More

GUY ANCHORS- Helix Ground Anchors : 6" x 3/4" x 66" Learn More

This model of removable climbing holds installs a small wedge mount with two lag screws. Climbing hold can be placed on and removed from wedge.  wedge is small and uncomfortable to grip or climb on serving as basic access restriction.

Learn More

GUY ANCHORS- Helix Ground Anchors : 10" x 1-1/4" x 96" Learn More

Stainless Steel Thimbles, When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More

This professional heavy-duty cutter cuts and fuses ends of polyester and nylon ropes and web quickly. Learn More

This model of removable climbing holds installs a small wedge mount with two lag screws. Climbing hold can be placed on and removed from wedge.  wedge is small and uncomfortable to grip or climb on serving as basic access restriction.

Learn More

Symmetrical heavy duty oval in hardened zinc plated steel. Larger size and better gate clearance than traditional oval carabiners. Keylock, catch free, gate system for enhanced safety and function. Learn More

Tennis-shoe friendly and stylish—this set offers variety - includes bolts for outdoor use

Learn More

8' long (96") Yellow High density polyethylene guy guard marker. 1.51" OD collapses to 1.375" once installed Learn More

Finish:	Galvanized, ASTM A-153
Material:	Steel
Width:	1-1/2 in
Length:	1/4 in
Vendor SKU:	5004
Minimum Order Qty:	1
UPC:	096359072133
Order Interval:	1
Manufacturer:	Hubbell Power
Brand:	CHANCE®
Features & Benefits:	Guy hook restricts guy wire from creeping down pole in wrapped strand guy applications. Can also be used as guy attachment, when used in compliance with deadend manufacturer's requirements. Hooks should be installed under head of bolt for maximum bolt shear strength.

Learn More

Stainless steel sideplates, 3"aluminum sheave, bushing, and stainless steel axle. 

 

MBS	Rope Capacity	Size	Weight	Efficiency
16000lbs	5/8"	6.5x4.25in	1.35lb	92.1%

Learn More

Slices rope like Butter! This fast and efficient unit has a hot blade which cleanly cuts through rope and webbing in seconds. Learn More

CMI Zip Line Trolley Lanyard makes zip lining a cinch. A rider should have two separate lanyards attached to the trolley for a safe and secure zip lining ride Learn More

The RC-800 Wire Rope Cutters are used for cutting 1/16 to 5/8 inch cable. Learn More

CMC Rescue's All-Weather Rope Log contains 20 rope log forms on heavy, Rite-in-the-Rain paper. Ample space is provided to document critical lifeline information and log use and inspection. Learn More

Width:	1.56 in
Strand Size:	1/4 to 7/16 in
Specifications:	100 ft-lb Minimum Bolt Torque
Finish:	Hot Dipped Galvanized
Length:	4 in
Material:	Steel
Clamping Bolt Size:	1/2 in
Suitable For Use With:	Loop Type Guy Dead End
Order Interval:	1
Vendor SKU:	6449
Standard & Approvals:	ARRA Compliant|Buy American Act Compliant|ASTM A153
Manufacturer:	Hubbell
Includes:	(3) Bolts
Brand:	CHANCE®
Features & Benefits:	Parallel grooves trap strand tightly without marring Each bolt has a shoulder to prevent turning while tightening

Learn More

The Felco C16 Wire Cutter has a capacity of 5/8 in. diameter and smaller. This is the GO-TO zipline cable cutter in the industry. Felco cutters keep cutting for years longer than other cable cutters. Learn More

Petzl Rope Bucket, The Petzl Rope Bucket has a unique tapered design and thin layer of closed cell foam enable the bag to stand up by itself and stay open. Learn More

Petzl Gemini is a double Prusik pulley with moving side plates designed for technical hauling systems and raising heavy loads. Prusik pulleys are designed to be used with a Prusik hitch, making for a lightweight progress capture system. Learn More

Bolt Cutters-Our Heavy Duty Bolt Cutter for general purpose use, designed for cutting medium steel and soft bolts, nuts, rods, chains, etc. Jaws are made of drop forged high grade alloy tool steel with heat treated Learn More

Ropes Course Zip Line Staples, Staples are the preferred way access ropes challenge course elements and zip line platforms: easy to install, easy to inspect, and easy to climb. If properly installed, the 8" staples can perform as fall protection anchors Learn More

Trapeze bar designed for use on ropes challenge courses: leap of faith. Our Trapeze Bar is made from 1-1/2" solid high density PVC. Learn More

100% polyester static kernmantle construction that is lightweight and offers super low-elongation. Learn More

The ETD - Ropes Course Rescue Bag is filled with essential items to preform a aerial rescue. If there are extra items you require for you rescue bag simply order them separately and toss them in you bag.

Contents:

• 1 - Medium Orange Rope Bag w/Rope History Record - 150'
• 1- 7/16" x 100', 120' or 150' KMIII Orange Static Rope
• 6' - 5mm Tech Cord for Tying Prusik 
• 1 - Pair EMT Shears 
• 1 - Aluminum Rescue 8  
• 4 - Steel Screw-Gate Big D Carabiners 
• 1 - BFD/ATC (Belay Friction Device)
• 1 - 5 Step Easy Step Aider
• 1 - Set Fixed Length 1" Heavy Duty Webbing Lobster Claws w/Zorber & Hooks

Learn More

Designed for use on Challenge ropes course/Zip Lining traverses, on cable or rope. Super strong with a 10,000 rating and a sheathed back up bolt. Stainless steel sides make this cable pulley bomb proof. Learn More

A 1" Climbing Rope and/or a Swing Rope. We make our 1" Climbing/Swing Ropes with Multiline II Rope. Multiline II Rope is strong, durable and resistant to UV rays. Our 1-1/2" Ropes are made with Combo Rope, aka poly-dac rope, which is similar to Multiline. The 1" Nitro Swing Rope also have a Pear Shaped Sling Link on the thimble to make it possible to hang them with a Rapid Link. All of these ropes have a metal thimble at one end and a back-splice at the other end.We offer multiple lengths. If you require a length other than what we have listed; please give us a call at (877) 206-8967

Learn More