Search results for: 'rescue rope'

Intended for high-load applications that normally call for a lifeline, but also require a rope that floats, Learn More

The ETD - Ropes Course Rescue Bag is filled with essential items to preform a aerial rescue. If there are extra items you require for you rescue bag simply order them separately and toss them in you bag.

Contents:

• 1 - Medium Orange Rope Bag w/Rope History Record - 150'
• 1- 7/16" x 100', 120' or 150' KMIII Orange Static Rope
• 6' - 5mm Tech Cord for Tying Prusik 
• 1 - Pair EMT Shears 
• 1 - Aluminum Rescue 8  
• 4 - Steel Screw-Gate Big D Carabiners 
• 1 - BFD/ATC (Belay Friction Device)
• 1 - 5 Step Easy Step Aider
• 1 - Set Fixed Length 1" Heavy Duty Webbing Lobster Claws w/Zorber & Hooks

Learn More

CMC now offers the standard utility scissors with titanium bonded blades. Using a patented process, titanium is bonded to a stainless steel core to produce a sharper, more corrosion resistant, longer lasting edge. Learn More

The Ballet 8 is one of the smallest and strongest mini 8's available. Equipped with Ears, it will serve as a rescue 8, personal escape device, or a regular rappel 8. Learn More

Designed to be the ultimate, general purpose rock climbing, rescue or ropes course carabiner, the CMC Rescue Steel Locking D combine CMC's experience in rescue with Omega Pacific's manufacturing expertise. Learn More

The original all around Rescue 8! Handles multiple carabiners, large ropes, anti-lock ears, and duel clip in holes. Learn More

Petzl Falcon Rescue/Zipline Harness, The two lateral attachment points transfer the weight evenly around the waistbelt for comfortable surface-supported work/ziplining Learn More

Very high efficiency pulley for intensive use by rescue professionals. Learn More

Ready-to-use reversible rescue kit designed to easily pick off and lower a victim. Learn More

Air Lift Rescue Vest, The latest in victim extraction and rescue. The Air-Lift Rescue Vest brings together fast donning and rapid extraction for short haul and hoist operations. Learn More

The Kong "Y" Rescue Lark's Foot is an asymmetric security loop in Y-shape of 13mm tape for self-securing canyoning. Learn More

Effectively reduces peak loads on an anchor in rescue and rigging system. Learn More

Petzl Bermude Rescue Triangle is designed for the rapid evacuation of victims. The Bermude is very easy to put onto a person, even in a sitting position. With its alternative attachment points, it easily adapts to all body sizes from children to adults. Learn More

The Rescue Figure 8 is a special figure 8 for rescue situations and fast rappeling.  It has a special shap for multiple rope locking, allows rappeling with heavy loads, has a high strength, and fits a wide range of rope diameters. Available in light alloy or stainlees steel.

• Weight: 154g, 5.43oz (alloy) 451g, 15.9 oz (stainless steel)
• Material: Light alloy or stainless steel
• Strength: 40kN

Learn More

The D4 Work/Rescue Descender features a unique and innovative cam action, which offers precise control at slow or fast speeds. The progressive cam works by way of one cam operating inside another cam. The D4 is the only ANSI certified descender on the market today.

• Weight: 655 grams (23 ounces)
• Strength: MBS 16kN (3597lbf)
• For use with single ropes from 10.5 - 11.5mm (7/16")
• Working Load Rating (WLL): 240kg (551lbs.)
• Certifications: CE EN12841, NFPA 1983, ANSI Z359

Learn More

A Super-efficient slicing tool that makes the most of its simple design and sturdy construction, the Vital Zip Knife holds a utility blade which is easily replaced once dull with a quick release of the Phillips screw holding the blade in position. The Vital Zip works well for cutting webbing and rope and to remove clothing from injured persons in rescue situations. And its feather light aspect means it can be carried along on a belt or in a kit pack without adding undue weight to your gear.

Learn More

We chose stainless steel over aluminum because of its "wearever" qualities. In order to compensate for the reduced friction inherent in stainless bars, we increased the radius of the friction surface to a full 1/2". Learn More

RSI Rescue Triangle, the RSI Rescue Triangle is an improvement on a classic design. The unit is adjustable enough for the largest victim, but also fits children. Learn More

The HaulerBiner Compact Rescue Kit is a lightweight, compact and simple to use/deploy device. The HaulerBiner is fully rated for lifting people. The HaulerBiner has three pulley wheels incorporated into each carabiner, creating a compact and lightweight 6:1 or 7:1 (theoretical) mechanical advantage system. The HaulerBiner also has a purpose-designed progress capture cam with, an ‘on/off’ position.  The HaulerBiner utilises purpose-developed 6mm (1/4") rope, for strength and easy handling/best grip.  The kit is supplied in a two-pouch bag, for easy deployment. The HaulerBiner is load rated to 140kg (310lbs) but it has an MBS of at least 16kN/3500lbs tested as a complete system. The length of the system, when fully contracted is only 32cm (12"). EN 12278, EN 567 certifications

Learn More

RSRP431 R-ALF Rescue Hauler Pulley- 2 Way Auto Locking Approved standards CE 0120 ANSI Z359 :4: 2007

 The R-ALF Pulley is the latest innovation in Accessability, Rescue, Confined Space working and Work Suspension Systems. The R-ALF Pulley has an over-speed brake built in so that the Pulley will lock on and hold when a fall occurs. The load rated Becket Eye on the R-ALF means that it can be used in combination with Prussic Pulleys to create a 3: 1 or 5: 1 Mechanical Advantage System. The unique design of the R-ALF (design patent applied for), means that an internal brake is not required and therefore it is capable of several thousand cycles and many arrests (minimum 12 monthly service intervals apply). Weight (grams) 1200 Weight (ounces) 43 Rope diameter range (mm) Approved 11mm EN1891-A Ropes Only Number of persons 2

Learn More

Waterbased formula is more environmentally friendly and easy to clean up. Whip-End Dip was designed to seal the end of a rope to prevent fraying or unraveling. Learn More

Stainless steel sideplates, 3" red anodized aluminum sheave, bushing, and stainless steel axle. 

*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition. 

 

MBS	Rope Capacity	Size	Weight	Efficiency
16000lbs	1/2"	6.75x5.25in	1.65lb	91.7%

 

 

 

Learn More

This manual rescue belay can be used as a self belay or with a belayer. The side plates and drum are made from heat treated 6061 T6 Aluminum while the two stainless steel pins keep the rope seperated as it is reaved around the drum. Drum is Aircraft Hard Anodized for extended wear which cost more but makes for a superior product. Learn More

100% polyester static kernmantle construction that is lightweight and offers super low-elongation. Learn More

Learn More

Rope thimbles protect the rope from wear whenever you have a fixed loop in the end of the rope, whether the rope is tied, spliced, or swaged. Learn More

CMC Rescue's All-Weather Rope Log contains 20 rope log forms on heavy, Rite-in-the-Rain paper. Ample space is provided to document critical lifeline information and log use and inspection. Learn More

Designed for rescue, it is great for portable ropes courses, ski & mountain rescue, tyrolean back ups, rescue kits, Rescue training programs, and hauling up access nets and ladders to challenge courses and climbing towers. Learn More

A step up in strength and durability from the RP101 rope pulley. Black Anodized Aluminum sideplates, 2 3/8" Aluminum sheave, Bushing, and Stainless Steel axle. A great all around rope pulley. Learn More

Red Anodized Aluminum sideplates, 2 3/8" Glass-filled Celcon sheave, n/a, and Stainless Steel axle. The original rope pulley! Durable design, great action, light weight and easy to use. Learn More

Petzl Rope Bucket, The Petzl Rope Bucket has a unique tapered design and thin layer of closed cell foam enable the bag to stand up by itself and stay open. Learn More

A 1" Climbing Rope and/or a Swing Rope. We make our 1" Climbing/Swing Ropes with Multiline II Rope. Multiline II Rope is strong, durable and resistant to UV rays. Our 1-1/2" Ropes are made with Combo Rope, aka poly-dac rope, which is similar to Multiline. The 1" Nitro Swing Rope also have a Pear Shaped Sling Link on the thimble to make it possible to hang them with a Rapid Link. All of these ropes have a metal thimble at one end and a back-splice at the other end.We offer multiple lengths. If you require a length other than what we have listed; please give us a call at (877) 206-8967

Learn More

A 5/8" Climbing Rope and/or a Swing Rope. We make our 5/8"Climbing/Swing Ropes with Multiline II Rope. Multiline II Rope is strong, durable and resistant to UV rays. Our 1-1/2" Ropes are made with Combo Rope, aka poly-dac rope, which is similar to Multiline. All of these ropes have a metal thimble at one end and a back-splice at the other end.We offer multiple lengths. If you require a length other than what we have listed; please give us a call at (877) 206-8967

Learn More

The Head Rush Gorilla Rope is specially designed to work as a reduction line for zipSTOP zipline braking system. Brings high strength, a long life span, and minimal stretch to your zipline runs. Learn More

The 5.4 mm V-TX Cord is the ultra-lightweight, super low-stretch addition to our High Tenacity Cord series. Learn More

Looking to enhance your program offerings with some specialized equipment? ESI offers three different universal accessibility kits that come complete with a variety of equipment that will help serve the needs of climbers who need additional support. 

 

The UAK-1 comes complete with the following:

If you need additional components for a larger course, ask us about the UAK-2 and UAK-3.

 

• Misty Mountain Easy Seat - a specialized rigid yet padded seat that has an integrated rated harness system allowing lower body support without sacrificing upper body mobility.

 

• Handlebar Ascender (Wellman pull-up bar or similar)  - a traditional ascender mechanism that will grab the rope with the integrated cam while also providing a variety of hand hold options including the built in handlebars.
  
• 1M Mechanical Advantage System (Petzl JAG or similar) - this compact system provides mechanical advantage at your fingertips when climbing at height and needing assistance transferring from one cable to the other. 
  
  
• Trolley w/ anti-rollback cam (ISC Zippy or similar) - this trolley allows for smooth forward movement on a course and option to sit in the system and take a break without losing forward momentum.
  
  
• Bosun chair (Petzl Podium or similar) - a rigid chair that is stowed out of the way on the climber and dropped into position at any point along the climb as an extra seat providing quick lower body support and resting spot.
  
  
• ISC R-ALF Pulley System - this system creates a 5:1 mechanical advantage with integrated locking hub option for those climbers who need assistance ascending vertically into a course. It includes everything needed for the full system including the R-ALF hub, two double pulleys, rope, carabiners and a handy storage bag.

Learn More