Search results for: 'singing rock steel'
- Did you mean
- singing rock sleev
- singing rope steel
-
Singing Rock V Lanyard$42.07The Singing rock V safety zip line lanyard designed to keep you connected to your protection at all times. “V” design allows you to stay connected while passing protection points. Learn More
-
SINGING ROCK TARZAN HARNESS$279.95
Full adjustable full body harness intended for rope courses and adventure parks. Speed buckle on the shoulder straps for quick on and off.
- Weight: 1530 grams/54 oz
- Easy to put on and take off
- Shoulder straps connect with Speed Buckle
- Padded waist belt and legs
- Buckle with captive bar matches ANSI and CSA standards
- CE 1019, EN813, EN361
-
Singing Rock Technic Full Body Harness$176.95
A fully adjustable, full body harness for work positioning and fall-arrest. Padded hip belt and leg loops for comfort. Available in Easy Lock buckle or Speed Lock buckles. NFPA version includes Speed Lock buckles and all steel components and attachment points.
- Independently adjustable leg loops and shoulder straps
- Front and rear (dorsal) attachment point for descender placement or work positioning (EN813)
-
Lateral attachment points in accordance with EN 358
- Aluminum D-rings are movable into "parking position" avoiding being caught-up while in use
- Easy-Lock buckles enable fluent and fast adjustment to fit to users body
-
Slots designed to secure hanging equipment
- Identification and methodical label
- Chest attachment point according to EN 361
- D-ring, flat and padded dorsal attachment point according to EN 361
- Weight: 1620 grams / 57 oz
-
CE 1019, EN 358, EN 813, EN 361
-
SINGING ROCK ZAZA FULL BODY KIDS HARNESSSpecial Price $60.95 Regular Price $64.95Lightweight full body adjustable harness for kids without well-defined hips necessary for a standard waist belt harness.
- one size fits all children with a height of 95 -130 cm and a maximum weight of 40 kg (37 - 51 in / 88 lb)
- red color textile loops for correct attachment to the harness
- three fast buckles enable very quick and easy size adjustment
- elastic straps with a plastic buckle keep harness on the body when kids are playing on the ground
- rear padding of the harness keeps shoulder straps apart and makes dressing easier
- 40 mm wide webbing for leg loops to provide comfort when climbing
- Weight: 338g/11.9oz
- CE 1019, EN 12277, UIAA
-
SINGING ROCK PROFI WORKER 3D STANDARD HARNESS$234.95
Fully adjustable harness for work positioning withcontinuous adjustable webbing, SPEED buckles, padded wide waist belt, anatomicleg loops and shoulder straps.
- super comfortable wide waist belt padding provides maximum comfort when working at height
- strength webbing on the waist belt is stitched in the way that at normal working situation the body weight is absorbed by the padding only
- reflective strap and printing on the waist belt and a reflective strap on the shoulder padding increase the visibility in dark working conditions (the black version of the harness is not equipped with the reflective elements)
- anatomic leg loops and waist belt are covered with strong PES fabric providing high abrasion resistance
- standard easy lock buckles enable smooth adjustment
- narrowed padding and webbing on the shoulder straps in a neck area enhance comfortable work
- leg loops connection straps made from durable PES webbing for better abrasion resistance
- front and back attachment points for fall arrest according to EN 361 marked with additional “A“ marking
- flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus
- front lower attachment point for descender placement or work positioning according to EN 813
- 2 side attachment points for work positioning according to EN 358
- 4 ergonomic braided gear loops with a bearing capacity of 5 kg
- heavier items up to 35 kg can be attached to the webbing on the waist belt
- additional loops on the waist belt and leg loops with a bearing capacity of 5 kg offer additional space for the gear and better gear organization
- wide elastic band at left shoulder strap for the gear attachment (e.g. transmitter)
- slots at the waist belt for Porter tool holder to carry your industrial tools
- shoulder attachment points for confined space rescue according to EN 1497
- chest ascender smart fixation system (using an additional maillon), works best with Cam Clean
- all steel components finished with E-coating for higher corrosion resistance
- identification and methodical label
- Weight: 177g, 62.68oz
- Max Rated Load: 150 kg
- Certifications: EN 358, EN 361, EN 813, EN 1497, CE 1019
-
Singing Rock Universal Top HarnessSpecial Price $45.80 Regular Price $49.99
Fully adjustable harness with a single tie-in point. The top uses the Rock&Lock buckle system that improves fit and performance. Suited for challenge courses, indoor gym climbing or as a lightweight mountaineering harness.
- Weight: 366 grams 12.4 oz
- Number of buckles: 3
- Reinforced tie in
- Drop seat
- CE and UIAA Certified
-
SINGING ROCK RED BLOCK - SRDSpecial Price $62.50 Regular Price $64.99
-
ROCK MASTER HELMET$61.45ROCK MASTER HELMET, The new Rock Master helmet has a comfortable and durable harness system that will keep you cool and comfortable. Learn More
-
Rock Exotica Swivels$87.36Rock Exotica Swivels made the first high-quality swivels back in 1987 with high-efficiency bearings and machined bodies. Great for keeping rope straight and tangle free while you climb or zip line. Learn More
-
Rock Exotica enForcer Load Cell$1,142.40Rock Exotica enForcer Load Cell is a compact aluminum load cell that measures force up to 20 kN. Utilizing two sampling modes, the Enforcer is able to monitor systems, and log drop testing in high resolution. Learn More
-
Rock Exotica SwivaEye Carabiners$107.52Rock Exotica Swivel Ropes Course Zip Line Carabiners , The SwivaBiner features a high-strength bushing that will withstand greater abuse than a bearing. The SwivaBiner is designed to re-orient a load, and not provide high-speed rotation. Learn More
-
Steel Locking D Rescue CarabinersAs low as $40.00Designed to be the ultimate, general purpose rock climbing, rescue or ropes course carabiner, the CMC Rescue Steel Locking D combine CMC's experience in rescue with Omega Pacific's manufacturing expertise. Learn More
-
Thimbles: Stainless Steel ThimblesAs low as $1.20Stainless Steel Thimbles, When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More
-
Large Steel CarabinersAs low as $19.12Steel carabiners are referred in ropes course, zip line, and cable applications. Learn More
-
Liberty Large Steel "D" CarabinerAs low as $19.07Liberty Large Steel "D" Carabiner . Large gate opening (1"). Big basket! Great for clipping lots of things at once or clipping into bulky harnesses or large diameter ropes. Learn More
-
Cable Clamps: Stainless Steel Cable ClampsAs low as $9.50Stainless Steel Cable clamps are ideal for use in salty and acidic environments like zip lining close to oceans or salt lake. These are durable and outlast Drop Forged clamps in harsh environments. Learn More
-
-
Petzl Go Steel Oval Quick Link$8.34When closed with a wrench, this steel quick link becomes a semi-permanent anchor ring. Learn More
-
Liberty Steel Modified "D"As low as $9.96Liberty Modified "D" zip lining carabiners are heat-hardened to hold 50kN and nickle palted to withstand intense abuse. Screw gate, Twist Lock and our three-stage Auto lock versions give you the right tools to work and play safe. individually tested. Learn More
-
Steel Caving ladder$199.00
Steel cable with aluminum rungs. Can be used in ropes courses, caving, rope access work, or emergency preparedness kits.
- Length 32 feet
- Weight: 3 lbs 4 oz.
- Width: 6"
- Breaking Strength: 1324 lbs.
-
-
Liberty Steel Heavy Duty Key Lock Oval Carabiners$13.14Symmetrical heavy duty oval in hardened zinc plated steel. Larger size and better gate clearance than traditional oval carabiners. Keylock, catch free, gate system for enhanced safety and function. Learn More
-
Omega XXX-Large Steel D Carabiner$40.87This industrial size carabiner combines a wide gate opening and high strength, useful for attaching to rungs on aerial ladders, buckets and industrial rescue or rope access anchors points that are too big for the large rescue carabiners. Learn More
-
CMI RP117 2" Stainless Steel Service Line Pulley$66.50
Stainless steel sideplates, 2" aluminum sheave, needle bearing, and stainless steel axle.
MBS
Rope Capacity
Size
Weight
Efficiency
8000lbs
1/2"
5x2.5in
0.5lb
90.6%
-
Robertson Rope Belay SpoolAs low as $114.00This manual rescue belay can be used as a self belay or with a belayer. The side plates and drum are made from heat treated 6061 T6 Aluminum while the two stainless steel pins keep the rope seperated as it is reaved around the drum. Drum is Aircraft Hard Anodized for extended wear which cost more but makes for a superior product. Learn More
-
Franklin Work Positioning Harness$165.00
- The Franklin seat provides more long-term comfort over the course of a long workday than hanging in a harness does.
- Excellent additon for use with accessability and universal climbing programs
- It is intended for use with Singing Rock's fall arrest or work positioning harnesses or equivelant.
- It is easy to adjust with Rock and Lock buckles.
- Wide sitting area ensures good stability and allows for comfortable hanging, as well as standing work positions.
- Three D-rings (bearing capacity 50kg) for gear suspension.
- Weight: 1650 grams/58 oz
-
Ropewalker Ascenders: Rope AscendersAs low as $103.95Our enhancements include adjustable spring tension, a reversible cable and pin, and "mud vents" to help prevent dirt caked on rope from degrading ascender performance. Learn More
-
Fat Cat Zip Line Trolley-5/8", 3/4" CableAs low as $214.00The Fat Cat is from a line of proven performers for zip line operations: Robertson Mountaineering. This specialized design works great for the thicker and larger 1/2" - 3/4" cables used more and more by zip line tours and canopy tours. Learn More
-
CHANCE® 6449 Guy Clamp, 1/4 to 7/16 in Strand, 1/2 in Clamping Bolt, 4 in L x 1.56 in W, Steel$29.95
Width: 1.56 in Strand Size: 1/4 to 7/16 in Specifications: 100 ft-lb Minimum Bolt Torque Finish: Hot Dipped Galvanized Length: 4 in Material: Steel Clamping Bolt Size: 1/2 in Suitable For Use With: Loop Type Guy Dead End Order Interval: 1 Vendor SKU: 6449 Standard & Approvals: ARRA Compliant|Buy American Act Compliant|ASTM A153 Manufacturer: Hubbell Includes: (3) Bolts Brand: CHANCE® Features & Benefits: - Parallel grooves trap strand tightly without marring
- Each bolt has a shoulder to prevent turning while tightening
-
Universal Accessibility Kit (UAK-1)
Starting at $24.07
Looking to enhance your program offerings with some specialized equipment? ESI offers three different universal accessibility kits that come complete with a variety of equipment that will help serve the needs of climbers who need additional support.
The UAK-1 comes complete with the following:
If you need additional components for a larger course, ask us about the UAK-2 and UAK-3.
- Misty Mountain Easy Seat - a specialized rigid yet padded seat that has an integrated rated harness system allowing lower body support without sacrificing upper body mobility.
- Handlebar Ascender (Wellman pull-up bar or similar) - a traditional ascender mechanism that will grab the rope with the integrated cam while also providing a variety of hand hold options including the built in handlebars.
- 1M Mechanical Advantage System (Petzl JAG or similar) - this compact system provides mechanical advantage at your fingertips when climbing at height and needing assistance transferring from one cable to the other.
- Trolley w/ anti-rollback cam (ISC Zippy or similar) - this trolley allows for smooth forward movement on a course and option to sit in the system and take a break without losing forward momentum.
- Bosun chair (Petzl Podium or similar) - a rigid chair that is stowed out of the way on the climber and dropped into position at any point along the climb as an extra seat providing quick lower body support and resting spot.
- ISC R-ALF Pulley System - this system creates a 5:1 mechanical advantage with integrated locking hub option for those climbers who need assistance ascending vertically into a course. It includes everything needed for the full system including the R-ALF hub, two double pulleys, rope, carabiners and a handy storage bag.
-
RESCUE FIGURE 8Special Price $42.80 Regular Price $44.99
The Rescue Figure 8 is a special figure 8 for rescue situations and fast rappeling. It has a special shap for multiple rope locking, allows rappeling with heavy loads, has a high strength, and fits a wide range of rope diameters. Available in light alloy or stainlees steel.
- Weight: 154g, 5.43oz (alloy) 451g, 15.9 oz (stainless steel)
- Material: Light alloy or stainless steel
- Strength: 40kN
-
TECHNIC - ANSI FULLBODY HARNESS$179.95
A fully adjustable, full body harness for work positioning and fall-arrest. Padded hip belt and leg loops for comfort. Available in Easy Lock buckle or Speed Lock buckles. NFPA version includes Speed Lock buckles and all steel components and attachment points.
- Independently adjustable leg loops and shoulder straps
- Front and rear (dorsal) attachment point for descender placement or work positioning (EN813)
-
Lateral attachment points in accordance with EN 358
- Steel D-rings are movable into "parking position" avoiding being caught-up while in use
- Easy-Lock buckles enable fluent and fast adjustment to fit to users body
-
Slots designed to secure hanging equipment
- Identification and methodical label
- Chest attachment point according to EN 361
- D-ring, flat and padded dorsal attachment point according to EN 361
- Weight: 1620 grams / 57 oz
-
CE 1019, EN 358, EN 813, EN 361
-
Tarzan Economic Universal Full Body Harness$129.95
Fully adjustable full body harness intended for rope courses and adventure parks.
- CE 1019, EN12277, EN161
- front attachment point for belaying and rappeling according to EN 12277 type C
- waist belt and the leg loops without the padding enables to put the harness to every person
- rear steel D-ring with a bearing capacity of 15 kN according EN 361
- waist belt, shoulder straps and the leg loops are easily adjustable with easy lock buckles
- red webbing strap stitched into the buckles simplify handling with them
- all steel components are finished with E-coating technology for higher corrosion resistance
- left leg loop with red color helps to put the harness on
- waist belt webbing is in red as well for easier orientation in the harness
- dorsal plastic plate with different color according the size of the harness (S – yellow, UNI – red)
- construction ensures long-time operation and efficiency (easy releasing and fastening even when dirty and tough webbing)
- Rear dorsal plate for easy size identification. Yellow = Small. Red = Universal Sizing
- Weight: 1050g
- Size: S (110-150cm/43.3in -59in)/UNI (150cm-200cm/59in-79in)
-
Petzl Coudee Hanger$5.94Petzl's Coudee hanger holds the carabiner perpendicular to the rock face, holding the rope away from the rock. The hanger includes an 8mm bolt. Learn More
-
CONNEXION FIXE Anchor strapAs low as $31.55CONNEXION FIXE Anchor strap, Forged steel D-rings on the ends. The Connexion Fixe anchor strap is the climbers choice for top rope anchor systems. This anchor strap is the best for rock climbing rope systems. Learn More