Search results for: 'gate duti coil mount 3'

Lock washers are a critical component to through bolts on wood poles. Pole shrinkage mandates the use of double coil lock washers to keep pressure on the nut and bolt to prevent loosening. Learn More

Stainless Steel Thimbles, When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More

Symmetrical heavy duty oval in hardened zinc plated steel. Larger size and better gate clearance than traditional oval carabiners. Keylock, catch free, gate system for enhanced safety and function. Learn More

Stainless steel sideplates, 3"aluminum sheave, bushing, and stainless steel axle. 

 

MBS	Rope Capacity	Size	Weight	Efficiency
16000lbs	5/8"	6.5x4.25in	1.35lb	92.1%

Learn More

The Universal Mount is a mounting device designed specifically for use as a climbing anchor. Learn More

When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More

The Universal Mount is a simple and durable mounting point for auto belays and top rope anchors.

Learn More

William Carabiner, Available with manual locking system (SCREW-LOCK) or automatic locking system (BALL-LOCK, TRIACT-LOCK). Learn More

Liberty Large Steel "D" Carabiner . Large gate opening (1"). Big basket! Great for clipping lots of things at once or clipping into bulky harnesses or large diameter ropes. Learn More

The TRU-Mount Auto Belay mounting system is an elegant and cost-effective method to add the TRUBLUE Auto Belay to most climbing facilities.

Learn More

The zipSTOP Pivot Mount expands the mounting possibilities of your zipSTOP or zipSTOP IR Zip Line Brake, allowing the use of a gantry. Learn More

CMI Zip Line Trolley Lanyard makes zip lining a cinch. A rider should have two separate lanyards attached to the trolley for a safe and secure zip lining ride Learn More

Designed to be the ultimate, general purpose rock climbing, rescue or ropes course carabiner, the CMC Rescue Steel Locking D combine CMC's experience in rescue with Omega Pacific's manufacturing expertise. Learn More

Use this turnkey kit for single-point mounting of your TRUBLUE Auto Belay or QUICKjump Free Fall Device, as specified in the Operator Manuals. Learn More

Alu Harness Carabiner Learn More

These are great carabiners for clipping clients into zip line, rock climbs, ropes course and challenge course elements. These carabiners are light weight, strong and have a wide gate opening. Now made by SMC

Learn More

Contigua Straight Gate, Whether for emergency use--when light and fast truly matter--or just to keep on your key-chain, the Contigua is a perfect fit. Available in various colors Learn More

Steel carabiners are referred in ropes course, zip line, and cable applications. Learn More

Omni Semi-Circle Carabiner, The half-moon OMNI is used to close harnesses that have two attachment points that must be joined with a connector. Learn More

Liberty Modified "D" zip lining carabiners are heat-hardened to hold 50kN and nickle palted to withstand intense abuse. Screw gate, Twist Lock and our three-stage Auto lock versions give you the right tools to work and play safe. individually tested. Learn More

A simple way to reinforce the proper use of auto belay devices and minimize risk from climbing error.

Learn More

Learn More

This model of removable climbing holds installs a small wedge mount with two lag screws. Climbing hold can be placed on and removed from wedge.  wedge is small and uncomfortable to grip or climb on serving as basic access restriction.

Learn More

Petzl Am'D Carabiner - Add security to your climbing anchors with the Petzl Am'D Traict Locking Carabiner. Take your pick of Petzl's Screw-Lock, Ball-Lock, or Triact-Lock gate to perfectly match your preference. The Am'D Carabiner also has a snag-free keylock gate to assure it never snags on gear when you're building a solid anchor at the top of the pitch you just climbed. Learn More

This model of removable climbing holds installs a small wedge mount with two lag screws. Climbing hold can be placed on and removed from wedge.  wedge is small and uncomfortable to grip or climb on serving as basic access restriction.

Learn More

3/4" Timber Bolts, Super strong and easy to install, Timber bolts are used for pole to pole attachments, deck beam mounts, climbing towers, climbing walls, adventure towers, high ropes course elements and low ropes course elements Learn More

Removable climbing holds have been machined not to overlap the baseplate. Building this product is a complicated process using climbing holds intentionally designed for the baseplate and key. We recommend you purchase this fully assembled version. 

If a climbing hold overlaps the baseplate, it will not meet commercial playground standards. Other products in the industry have their climbing holds overlapping the baseplate. 

Once the base plate is attached to your wall, no tools are required to remove and reinstall the hold assembly. A removable climbing hold is ideal when your wall is not in use and you must prevent access to meet ACCT/CPSI standards. 

 

To install, screw the baseplate to the wall, insert the key/climbing hold into the top of the slot and slide the climbing hold down to the bottom of the bracket. 

 

• Plate dimensions are 4-3/4" at the widest x 6-1/2" tall.
• One rock climbing hold and bracket assembly included. 
• This product comes fully assembled and includes attachment screws.
• Insert into the slot and slide down to lock in place.
• Slide up and lift out of the slot for easy removal.
• Ten different designs, which are all jugs. 
• Large base plate to accommodate large holds and meet ASTM, ACCT, CPSI, and CSA standards.

Learn More

The SWIVEL OPEN gated swivel features a wide opening and thus can be attached to a range of products (pulleys, lanyards). It reduces the bulk and weight of component systems and solves the twisting and tangling problems of ropes and lanyards. Sealed ball bearings offer excellent performance and reliability.

Learn More

Our largest HMS designed for easy belay setup in any situation. The frame’s round bar stock works great with a variety of belay techniques including popular semi-auto locking devices, tube devices, and Munter hitch.

• CE EN12275 Certified
• Weight: 85g
• Strength (major axis): 25kN

Learn More

They fit securely on a wide range of flange widths and beam sizes, with a built-in suspension bar that provides for close mounting. The clamp jaw design reduces flange stress by distributing the load away from the flange edge. Learn More

The 1/4, 5/16, and 3/8 Swaging Tools are designed for crimping copper and aluminum oval sleeves and stop sleeves on zip lines, life lines,ropes course elements. Learn More

3 Strand Import Polydacron Rope combines filament and staple/spun polyester wrapped around a polyolefin core to produce a rope with considerably lower stretch, better wear life and superior handling characteristics.

• Color: White/Red
• Material: Polyester Blend
• Construction: 3 Strand
• Easy to splice
• Ideal for Element Construction

Learn More

Teufelbergers - New England Ropes 3 Strand Multiline II is a unique construction that combines filament and staple/spun polyester wrapped around a polyolefin core to produce a rope with considerably lower stretch, better wear life and superior handling characteristics.

• Color: White/Orange
• Material: Polyester Blend
• Construction: 3 Strand
• Easy to splice
• Ideal for rigging

Learn More

Lag Screw Lag Bolt - Galvanized, Typically used for LEAP anchors, deck constuction for zip lines and ropes courses. Hot Dipped Galvanized; Hex Head Lag Screw. 5/8" x 6" lags or 5/8" x 8" lags are recommended for Leap/Lead/Bolt hanger anchors where through bolts are not required Learn More

Looking to enhance your program offerings with some specialized equipment? ESI offers three different universal accessibility kits that come complete with a variety of equipment that will help serve the needs of climbers who need additional support. 

 

The UAK-1 comes complete with the following:

If you need additional components for a larger course, ask us about the UAK-2 and UAK-3.

 

• Misty Mountain Easy Seat - a specialized rigid yet padded seat that has an integrated rated harness system allowing lower body support without sacrificing upper body mobility.

 

• Handlebar Ascender (Wellman pull-up bar or similar)  - a traditional ascender mechanism that will grab the rope with the integrated cam while also providing a variety of hand hold options including the built in handlebars.
  
• 1M Mechanical Advantage System (Petzl JAG or similar) - this compact system provides mechanical advantage at your fingertips when climbing at height and needing assistance transferring from one cable to the other. 
  
  
• Trolley w/ anti-rollback cam (ISC Zippy or similar) - this trolley allows for smooth forward movement on a course and option to sit in the system and take a break without losing forward momentum.
  
  
• Bosun chair (Petzl Podium or similar) - a rigid chair that is stowed out of the way on the climber and dropped into position at any point along the climb as an extra seat providing quick lower body support and resting spot.
  
  
• ISC R-ALF Pulley System - this system creates a 5:1 mechanical advantage with integrated locking hub option for those climbers who need assistance ascending vertically into a course. It includes everything needed for the full system including the R-ALF hub, two double pulleys, rope, carabiners and a handy storage bag.

Learn More

Forged Nut Eye bolts are the backbone of ropes challenge course and zip line construction. Zip line and other cables are terminated to the eye bolt around a thimble to prevent cable deformation at the turn back. Learn More