Search results for: 'single lag tethers'

The Zip Line Tether was built to connect our Full Body harness to the Zip Line pulley Learn More

Lag Screw Lag Bolt - Galvanized, Typically used for LEAP anchors, deck constuction for zip lines and ropes courses. Hot Dipped Galvanized; Hex Head Lag Screw. 5/8" x 6" lags or 5/8" x 8" lags are recommended for Leap/Lead/Bolt hanger anchors where through bolts are not required Learn More

Lock washers are a critical component to through bolts on wood poles. Pole shrinkage mandates the use of double coil lock washers to keep pressure on the nut and bolt to prevent loosening. Learn More

Shoulder Eye Screw Lag, Use for connecting hand lines, spiders webs to trees, etc. on challenge courses. Do not use in life support applications. Also used when wrapping cable around a tree. Learn More

Zip Line LEAP Anchor, A high-strength, multi-purpose anchor that can be used equally well as self-belay anchors on staple climbs or as the ideal termination fitting on belay cables anywhere where the cable load is at 90° to the angle of the bolt Learn More

Just Perfect Pole Steps : JP Steps Removable utility pole and tree steps

Learn More

Just Perfect Pole Steps : JP Steps Removable utility pole and tree steps. This is the step only. These steps can replace common utility pole steps that have an upturned hook end.

Learn More

We offer three different style of pilot auger bits for 1/2" lags for ropes course decks, zip line decks and general deck construction for 1/2" & 5/8" lag bolts Learn More

Detachable Pole and Tree Step, These are the preferred security steps for ropes challenge courses either rin trees or poles. Lag bolt and plate are installed into a ropes course pole or tree. Learn More

Just Perfect Pole Steps : JP Step II

 

The JP Step I and JP Step II  are Pole/Tree steps and fall protection anchor in one (think integrated LEAD anchor). Installs with 5/8" x 6" lag in poles and 5/8" x 8" lag in trees for the JP I and II. The JP R uses a Specialty 4" Lag Bolt and plate that comes with it. Supports over 5,000 lbs when properly installed. A great alternative to traditional pole steps and staples.  These pole/tree steps are easily installed (about one minute). They also provide great positive climbing aids for hands, feet, and safety anchors. JP Steps for trees and poles are the best looking and safest integrated step - fall protection anchor for ropes courses, challenge courses, and zip line access.

Learn More

Our HyperBars, a solid anodized aluminum bar with a single lock-off pin, allow for easier and safer lock offs. The HyperRack includes a single HyperBar. Learn More

It provides increased friction for single ropes when rappelling or lowering, without extra gear or the need to open the carabiner Learn More

Innovative belay device with high braking performance for single ropes. The optimized Mega Jul geometry ensures easy and secure belaying even with thicker ropes. Learn More

CMI Twin Expedition Arborist Ascender, The Twin Expedition is the first single-handled dual ascender designed to meet the needs of industry leading arborist professionals. The EXPTWIN easily accommodates three rope techniques - 2:1 doubled rope technique (DdRT), 1:1 single rope technique (SRT), and 1:1 twin line ascent (DbRT). Learn More

Use this turnkey kit for single-point mounting of your TRUBLUE Auto Belay or QUICKjump Free Fall Device, as specified in the Operator Manuals. Learn More

The perfect size for light and tower rescues. Fits ropes from 8mm to 1/2". Features built in safety cam for use in "jigger" or "short haul" systems. Use with CMI micro single or double pulley 3:1 or 4:1 mechanical advantage systems. Features a centered bronze bushing. Strength: 7000 lbs. The CMI Single Micro Hauler is 154 mm. tall, 53 mm wide, and 40 mm. thick and 19 g. Learn More

Petzl Shunt Ascender, It locks onto either a single rope or double ropes of the same diameter and holds well on icy and muddy ropes. Learn More

The BUG backpack is designed for single-day multi-pitch rock climbing, and is perfect for everyday uses. Suitable for carrying gear on the approach and when climbing (hydration system, food, clothing, shoes). Learn More

Originally designed for single rope descents in caving, the Stop has become a standard tool for the rope access worker. The Stop is designed to automatically "stop" the descent when the red handle is not depressed. Learn More

Multiline 3-Strand Spliced Rope Zip Line Lanyards (tethers). Plastic teardrop shaped thimble on each end.

Learn More

Petzl P42 Caritool, A carabiner-shaped tool holder designed to organize gear attached to a harness. Ice-screws, pitons, cams, as well as small tools, can be arranged and accessed single-handedly Learn More

PANGA is a single-size helmet, durable and easy to use, designed for group and club use. Its FLIP&FIT system allows the headband size to be easily adjusted by an operator, or by the user. This system also offers protection for the headband during storage and transport. Learn More

The Finesse climbing/zipline harness is designed specifically for women. It is slightly narrower and lighter than our Silhouette harness, making it a great choice for single pitch or sport climbing applications or even zipline runs. Learn More

The Singing rock V safety zip line lanyard designed to keep you connected to your protection at all times. “V” design allows you to stay connected while passing protection points. Learn More

The Zorber Shock absorbing unit is compact and lightweight. When a 220 pound weight is dropped six feet, the maximum arresting force will be less than 900 pounds. Learn More

The Slim Ratcheting Lineman Wrench works on four different square sizes, covering all of the common utility pole hardware. The long handle provides plenty of leverage and a tight ratcheting mechanism increases efficiency. The high visibility yellow socket includes a bolt-through design, enabling use on long bolts. Handle is fully integrated for durability.

Features:

• Ratcheting Wrench features four sizes in one tool (4-in-1)
• 3/4-Inch, 13/16-Inch, 1-Inch and 1-1/8-Inch combination square socket sizes
• Works on most common utility pole hardware, such as lag bolts, C clamps and suspension bolts
• Bolt-through design allows bolts to pass through the socket
• Fully integrated handle for durability and non-slip grip for comfort
• Tether hole to keep it connected when working at height
• Bright yellow socket for easy visibility

Specifications:

Learn More

A great harness for group users such as clubs, schools and camps. A great value in a fully adjustable harness. Easily adjustable harness with a single tie in point.

• Weight: 400 grams
• Number of buckles: 3
• Gear loops: 0
• Single reinforced tie in
• Universal size fits up to 47" waist.
• CE and UIAA Certified

Learn More

Stainless Steel sideplates, two 2" Stainless Steel sheaves, Bearing, and Stainless Steel axle. Learn More

The Mighty Mini is the only zip line trolley that has 2" wheels which means full size bearings, fast zip line runs, a unbeatable longevity for a small frame trolley Learn More

CMI Trolley Brake Block, The striking surface is crafted from ultra-high molecular weight polyethylene, noted for it's exceptional wear resistance. Steel hardware and a galvanized eye bolt round out the package Learn More

Misty Mountain Challenge Harness – has quick adjust waist and leg buckles. Designed specifically for climbing gyms, ropes courses and challenge towers, the Challenge Harness is simple to use, safe and durable. It features a single reinforced tie-in point and pre threaded, quick adjust waist and leg loop buckles. The single tie in point, along with the quick adjust waist and leg buckles, provide for a quick set up and the durable components ensure much hard wear. Quick and convenient, the Challenge Harness is a great all around program harness.

Youth: Green tie-in point
Standard: Blue tie-in point
X-Large: Black tie-in point

Learn More

Dry treatment makes the rope more resistant to water, dirt and abrasion; handling, grip and other characteristics are retained longer in cold, wet conditions. Learn More

This model of removable climbing holds installs a small wedge mount with two lag screws. Climbing hold can be placed on and removed from wedge.  wedge is small and uncomfortable to grip or climb on serving as basic access restriction.

Learn More

This model of removable climbing holds installs a small wedge mount with two lag screws. Climbing hold can be placed on and removed from wedge.  wedge is small and uncomfortable to grip or climb on serving as basic access restriction.

Learn More

Fully adjustable harness with a single tie-in point. The top uses the Rock&Lock buckle system that improves fit and performance. Suited for challenge courses, indoor gym climbing or as a lightweight mountaineering harness.

• Weight: 366 grams 12.4 oz
• Number of buckles: 3
• Reinforced tie in
• Drop seat
• CE and UIAA Certified

Learn More

The Challenge harness is built for group-use activities like ropes courses, indoor and outdoor climbing as well as mountaineering. It is an adjustable unpadded harness with three auto locking buckles. A single visible attachment point, closing of the waist on the right side, and two different leg colors for ease and speed of use.

Learn More