Back to Top
Search results for: 'stainless step zip line coil 5 16'
-
Thimbles: Stainless Steel ThimblesAs low as $1.32Stainless Steel Thimbles, When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More -
Lock Washers: Single & Double Coil Lock WashersAs low as $0.33Lock washers are a critical component to through bolts on wood poles. Pole shrinkage mandates the use of double coil lock washers to keep pressure on the nut and bolt to prevent loosening. Learn More
-
JP Step II Pole Step / Tree Step$42.24
Just Perfect Pole Steps : JP Step II
The JP Step I and JP Step II are Pole/Tree steps and fall protection anchor in one (think integrated LEAD anchor). Installs with 5/8" x 6" lag in poles and 5/8" x 8" lag in trees for the JP I and II. The JP R uses a Specialty 4" Lag Bolt and plate that comes with it. Supports over 5,000 lbs when properly installed. A great alternative to traditional pole steps and staples. These pole/tree steps are easily installed (about one minute). They also provide great positive climbing aids for hands, feet, and safety anchors. JP Steps for trees and poles are the best looking and safest integrated step - fall protection anchor for ropes courses, challenge courses, and zip line access.
Learn More -
Thimbles: Zip Line Wire Rope ThimblesAs low as $0.79When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More
-
JP Steps Removable Pole Steps - With Lag and Plate$27.45
Just Perfect Pole Steps : JP Steps Removable utility pole and tree steps
Learn More -
JP Steps Removable Pole Steps- No Plate and Lag$20.35
Just Perfect Pole Steps : JP Steps Removable utility pole and tree steps. This is the step only. These steps can replace common utility pole steps that have an upturned hook end.
Learn More -
-
Fat Cat Zip Line Trolley-5/8", 3/4" CableAs low as $235.40The Fat Cat is from a line of proven performers for zip line operations: Robertson Mountaineering. This specialized design works great for the thicker and larger 1/2" - 3/4" cables used more and more by zip line tours and canopy tours. Learn More
-
Wire Rope_Ropes Course_Zipline Cable: 5/16" Wire RopeAs low as $0.68Our Galvanized Aircraft Zip Lining Cable is made in accordance with Federal Specification RR-W-410D, meeting the dimensional and strength requirements of MIL-W-83420D. Learn More
-
Cable Clamps: Stainless Steel Cable ClampsAs low as $10.45Stainless Steel Cable clamps are ideal for use in salty and acidic environments like zip lining close to oceans or salt lake. These are durable and outlast Drop Forged clamps in harsh environments. Learn More
-
Ropes Course Zip Line StaplesAs low as $3.25Ropes Course Zip Line Staples, Staples are the preferred way access ropes challenge course elements and zip line platforms: easy to install, easy to inspect, and easy to climb. If properly installed, the 8" staples can perform as fall protection anchors Learn More
-
Detachable Pole and Tree Steps$20.79Detachable Pole and Tree Step, These are the preferred security steps for ropes challenge courses either rin trees or poles. Lag bolt and plate are installed into a ropes course pole or tree. Learn More
-
Robertson SR71 Blackbird Zip Line TrolleyAs low as $209.00Unlike the competition it is assembled using machined axles which may cost more but give the SR-71 zip trolley unparalleled structural integrity. Learn More
-
Turnbuckles: Cable Zip Line TurnbuckleAs low as $16.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
7/16" - 9/16" AUGER BITS - Pilot bitsAs low as $17.00We offer three different style of pilot auger bits for 1/2" lags for ropes course decks, zip line decks and general deck construction for 1/2" & 5/8" lag bolts Learn More
-
Swaging Tools - 1/4" - 3/8" Cable CrimperAs low as $191.40The 1/4, 5/16, and 3/8 Swaging Tools are designed for crimping copper and aluminum oval sleeves and stop sleeves on zip lines, life lines,ropes course elements. Learn More
-
Machine BoltsAs low as $5.45Our Machine Bolts are hot dip galvanized, forged steel, quenched and tempered and are sold with hex nuts attached. Round or square washers and lock washers can be added separately. Learn More
-
Serving SleevesAs low as $2.26Serving Sleeves, These are usually in a 1x7 configuration: 1 bundle of 7 strands. Cable used in ropes courses and zip lines is usually 7x19 or 6x24: Much more flexible Learn More
-
CMI RP117 2" Stainless Steel Service Line Pulley$73.15
Stainless steel sideplates, 2" aluminum sheave, needle bearing, and stainless steel axle.
Learn MoreMBS
Rope Capacity
Size
Weight
Efficiency
8000lbs
1/2"
5x2.5in
0.5lb
90.6%
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Eye 5/8" x 6"$16.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Hook-Hook 5/8" x 6"$16.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Hook 5/8" x 6"$16.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Jaw 5/8" x 6"$16.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Jaw 5/8" x 6"$16.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Hook 5/8" x 6"$16.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Hook-Hook 5/8" x 12"$20.35Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Hook 5/8" x 12"$20.35Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Jaw 5/8" x 12"$20.35Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Jaw 5/8" x 12"$20.35Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Hook 5/8" x 12"$20.35Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Eye 5/8" x 9"$18.65Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Hook-Hook 5/8" x 9"$18.65Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Hook 5/8" x 9"$18.65Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Jaw 5/8" x 9"$18.65Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Jaw 5/8" x 9"$18.65Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
