Search results for: 'Rescue Lifeline Static Rope and 1=1'

The VERTIGO WIRE-LOCK carabiner is designed for use on via ferrata lanyards along with zipline systems and ropes courses. Learn More

Kong, one of the great names in outdoor adventure has put its zip line trolley on the market. The Kong Pamir Zip Line Trolley is a double pulley that can be used effectively with either cable or rope. Learn More

The Petzl Vrillee hanger is for direct aid. It holds the carabiner parallel to the rock face allowing the rope to run easily through the carabiner. With 8mm bolt Learn More

Petzl Rack Brake Bar Descender, The design and configuration of the bars makes it easy to set up and insert the rope. Compact and lightweight, the device allows the user to adjust the amount of friction during the descent to adapt to changing conditions Learn More

Our HyperBars, a solid anodized aluminum bar with a single lock-off pin, allow for easier and safer lock offs. The HyperRack includes a single HyperBar. Learn More

The RING OPEN gated ring is designed for the semi-permanent connection of equipment. Its round shape ensures optimal functioning in all directions. It has a wide opening that allows installation of ropes with sewn terminations. Learn More

With a maximum weight of 165 g, the SIROCCO helmet sets a new standard for lightness. The one-piece construction minimizes helmet weight while retaining excellent impact resistance, due to the mechanical properties of expanded polypropylene (EPP). Learn More

Rock Exotica Swivels made the first high-quality swivels back in 1987 with high-efficiency bearings and machined bodies. Great for keeping rope straight and tangle free while you climb or zip line. Learn More

The VERTIGO TWIST-LOCK carabiner is designed for use on progression lanyards. Its ergonomic design and automatic locking system facilitate manipulations when passing intermediate anchors. Learn More

Because small children do not have well-defined hips for a waist belt to latch onto, the full body design is necessary for safety on any zipline/ropes course. Learn More

Forged Nut Eye bolts are the backbone of ropes challenge course and zip line construction. Zip line and other cables are terminated to the eye bolt around a thimble to prevent cable deformation at the turn back. Learn More

Removable climbing holds have been machined not to overlap the baseplate. Building this product is a complicated process using climbing holds intentionally designed for the baseplate and key. We recommend you purchase this fully assembled version. 

If a climbing hold overlaps the baseplate, it will not meet commercial playground standards. Other products in the industry have their climbing holds overlapping the baseplate. 

Once the base plate is attached to your wall, no tools are required to remove and reinstall the hold assembly. A removable climbing hold is ideal when your wall is not in use and you must prevent access to meet ACCT/CPSI standards. 

 

To install, screw the baseplate to the wall, insert the key/climbing hold into the top of the slot and slide the climbing hold down to the bottom of the bracket. 

 

• Plate dimensions are 4-3/4" at the widest x 6-1/2" tall.
• One rock climbing hold and bracket assembly included. 
• This product comes fully assembled and includes attachment screws.
• Insert into the slot and slide down to lock in place.
• Slide up and lift out of the slot for easy removal.
• Ten different designs, which are all jugs. 
• Large base plate to accommodate large holds and meet ASTM, ACCT, CPSI, and CSA standards.

Learn More

CMI Sport Racks are formed from 5/16" diameter stainless steel and are fitted with oversize stainless steel bars. We chose stainless steel over aluminum because of its "wearever" qualities. Learn More

The Petzl Ouistiti Kids Climbing/Zipline Harness works for children from 4 to 9 years old and gives your future rock star/zipliner a safe start on top rope laps. Learn More

Robertson and Adventure Rope Gear introduces the Total Transfer PT harness system, a combined transfer and therapy harness system that offers patients a new way to sit, stand, and walk without complex therapy harness transfer setups Learn More

Can be put on in under 30 seconds!!! Innovative harness for high ropes courses and adventure parks. Its easy-to-use, uncomplicated design means that visitors can put it on/take it off on their own. Learn More

These splicing fids are used to make splicing rope easier. Fid is made from stainless steel and hardwood.  Comes in two sizes

Small: for rope sizes up to 58"

Large: for rope sizes 5/8" and larger

Learn More

Nut Eye bolts are the main bolts used in ropes challenge course and zip line construction. Zipline and other cables are terminated to the eye bolt around a thimble to prevent cable deformation at the turn back. Learn More

Durable and very versatile, the BOREO helmet is suitable for climbing, mountaineering, caving, via ferrata, canyoning... Thanks to its hybrid construction, the helmet is both compact and head-covering. Learn More

Petzl Paw Rigging Plate, Coming in three sizes for different set ups the PAW provides strong and lightweight organization for your rope set up. Learn More

A smooth feeding, controlled braking device that looks great. Notch on one side of the device provides additional braking friction for thinner ropes giving you controlled descents and belays. Use on 8mm to 12mm ropes.

• Weight: 54 grams
• Rope Diameter Range: 8mm - 12mm
• CE EN15151-2

Learn More

Steel cable with aluminum rungs. Can be used in ropes courses, caving, rope access work, or emergency preparedness kits.

• Length 32 feet
• Weight: 3 lbs 4 oz.
• Width: 6"
• Breaking Strength: 1324 lbs.

Learn More

Kong Futura Foot Ascender, the Futura system (hand ascender, chest ascender and foot ascender) will be the most compact SRT hardware available on the market - but it will not be the cheapest! The Futura is here. A radical new approach to climbing ropes. Designed by top cavers for tight places in the most remote areas on earth (or under it). Surprisingly simple the new designs are comfortable to use thanks to the ergonomic grips. Learn More

Learn More

It may be small, but don’t underestimate the Head Rush LightSpeed Micro Zip Line Trolley. Learn More

Multiline 3-Strand Spliced Rope Zip Line Lanyards (tethers). Plastic teardrop shaped thimble on each end.

Learn More

Robertson and Adventure Gear introduces the Total Transfer PT harness system, a combined transfer and therapy harness system that offers patients a new way to sit, stand, and walk without complex therapy harness transfer setups. Learn More

A proven winner for the ropes course. Double-back buckles on the legs and waist.

One Size Fits Most

Learn More

The original Adaptive Ropes Course harness, the ARC allows all participants to experience challenge courses and ziplines, without regard to physical ability. Designed especially for participants with physical challenges, the ARC features a thickly padded, rigid seat, with integrated chest and pelvic harnesses, secure four point attachment system and dorsal head panel, providing a safe, comfortable harness for experiencing modern ropes courses.

*ARC Spreader Bar sold separately*

Learn More

Fully adjustable harness for work positioning withcontinuous adjustable webbing, SPEED buckles, padded wide waist belt, anatomicleg loops and shoulder straps.

• super comfortable wide waist belt padding provides maximum comfort when working at height
• strength webbing on the waist belt is stitched in the way that at normal working situation the body weight is absorbed by the padding only
• reflective strap and printing on the waist belt and a reflective strap on the shoulder padding increase the visibility in dark working conditions (the black version of the harness is not equipped with the reflective elements)
• anatomic leg loops and waist belt are covered with strong PES fabric providing high abrasion resistance
• standard easy lock buckles enable smooth adjustment
• narrowed padding and webbing on the shoulder straps in a neck area enhance comfortable work
• leg loops connection straps made from durable PES webbing for better abrasion resistance
• front and back attachment points for fall arrest according to EN 361 marked with additional “A“ marking
• flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus
• front lower attachment point for descender placement or work positioning according to EN 813
• 2 side attachment points for work positioning according to EN 358
• 4 ergonomic braided gear loops with a bearing capacity of 5 kg
• heavier items up to 35 kg can be attached to the webbing on the waist belt
• additional loops on the waist belt and leg loops with a bearing capacity of 5 kg offer additional space for the gear and better gear organization
• wide elastic band at left shoulder strap for the gear attachment (e.g. transmitter)
• slots at the waist belt for Porter tool holder to carry your industrial tools
• shoulder attachment points for confined space rescue according to EN 1497
• chest ascender smart fixation system (using an additional maillon), works best with Cam Clean
• all steel components finished with E-coating for higher corrosion resistance
• identification and methodical label
• Weight: 177g, 62.68oz
• Max Rated Load: 150 kg
• Certifications: EN 358, EN 361, EN 813, EN 1497, CE 1019

Learn More

The Head Rush Lightspeed EZ Clip Zip Line Trolley’s split-second, one-handed installation (just press the trigger against the zip line) will make your guides happy and increase throughput. Learn More

Stainless steel sideplates, 3"aluminum sheave, bushing, and stainless steel axle. 

 

MBS	Rope Capacity	Size	Weight	Efficiency
16000lbs	5/8"	6.5x4.25in	1.35lb	92.1%

Learn More

Black anodized aluminum sideplates, 2 3/8" zinc coated steel sheave, bushing, and stainless steel axle. 

MBS	Cable/Rope Capacity	Size	Weight	Efficiency
6000lbs	5/8"	4.375x3.5in	0.75lb	91.4%

 

Learn More

By incorporating a rigid stem on this belay/rappel device, climbers go from full lock-off to whipping out rope in a single, smooth action. No more binding up as the device tries to free itself. The amount of friction can be easily adjusted to suit your particular need. Climbing with fat ropes, a skinny partner or on low-angle slabs? Belay with the U-Grooves and clip into the bottom hole of the XF Forge for less friction. For the ultimate control, wrap that skinny cord around the rigid stem and rappel, figure-8 style.

Learn More

Just Perfect Pole Steps : JP Step II

 

The JP Step I and JP Step II  are Pole/Tree steps and fall protection anchor in one (think integrated LEAD anchor). Installs with 5/8" x 6" lag in poles and 5/8" x 8" lag in trees for the JP I and II. The JP R uses a Specialty 4" Lag Bolt and plate that comes with it. Supports over 5,000 lbs when properly installed. A great alternative to traditional pole steps and staples.  These pole/tree steps are easily installed (about one minute). They also provide great positive climbing aids for hands, feet, and safety anchors. JP Steps for trees and poles are the best looking and safest integrated step - fall protection anchor for ropes courses, challenge courses, and zip line access.

Learn More

The SWIVEL OPEN gated swivel features a wide opening and thus can be attached to a range of products (pulleys, lanyards). It reduces the bulk and weight of component systems and solves the twisting and tangling problems of ropes and lanyards. Sealed ball bearings offer excellent performance and reliability.

Learn More