Search results for: 'gear high rope'

The HaulerBiner Compact Rescue Kit is a lightweight, compact and simple to use/deploy device. The HaulerBiner is fully rated for lifting people. The HaulerBiner has three pulley wheels incorporated into each carabiner, creating a compact and lightweight 6:1 or 7:1 (theoretical) mechanical advantage system. The HaulerBiner also has a purpose-designed progress capture cam with, an ‘on/off’ position.  The HaulerBiner utilises purpose-developed 6mm (1/4") rope, for strength and easy handling/best grip.  The kit is supplied in a two-pouch bag, for easy deployment. The HaulerBiner is load rated to 140kg (310lbs) but it has an MBS of at least 16kN/3500lbs tested as a complete system. The length of the system, when fully contracted is only 32cm (12"). EN 12278, EN 567 certifications

Learn More

Shoulder Eye Screw Lag, Use for connecting hand lines, spiders webs to trees, etc. on challenge courses. Do not use in life support applications. Also used when wrapping cable around a tree. Learn More

Kong Furtura Chest Acscender Learn More

Petzl Caterpillar Edge Protector, The Caterpillar Edge Protector can be positioned independently to adapt to whatever the terrain throws at you Learn More

Ready-to-use reversible rescue kit designed to easily pick off and lower a victim. Learn More

CMI Double Expedition Ascender, The cam is the same design as those in our now famous Ultrascenders and carries the same lifetime wear-out guarantee. Extra large handgrip opening easily accomodates gloved or mittened hands Learn More

This innovative, all-in-one Pulley/Auto belay for fall protection is lightweight and easy to use. Auto belay pulley Locks in either direction (right or left) while climbing up or down. Learn More

In a bind, this ultra-lightweight ascender can be used to build hauling systems or as a Prusik-replacement in self-rescue situations. Learn More

They fit securely on a wide range of flange widths and beam sizes, with a built-in suspension bar that provides for close mounting. The clamp jaw design reduces flange stress by distributing the load away from the flange edge. Learn More

The AIRLINE throw-line offers an excellent compromise between flexibility and rigidity, for an accurate throw without the formation of knots as it comes out of the bag. Learn More

The Head Rush quickFLIGHT Free Fall Device gives riders the sensation of a “free fall” while comfortably lowering them to the ground.

Learn More

Thanks to its compact shape and SCREW-LOCK locking system, the ATTACHE is designed for multiple uses related to belaying: connecting a belay system to a harness, belaying with a Munter hitch... Learn More

Petzl Djinn Carabiner, Rugged carabiner for crag climbing, available in straight and bent gate versions. Learn More

Stainless steel sideplates, 3" aluminum hard coated sheave, bushing, and stainless steel axle. Learn More

Fully adjustable full body harness intended for rope courses and adventure parks.

• CE 1019, EN12277, EN161
• front attachment point for belaying and rappeling according to EN 12277 type C
• waist belt and the leg loops without the padding enables to put the harness to every person
• rear steel D-ring with a bearing capacity of 15 kN according EN 361
• waist belt, shoulder straps and the leg loops are easily adjustable with easy lock buckles
• red webbing strap stitched into the buckles simplify handling with them
• all steel components are finished with E-coating technology for higher corrosion resistance
• left leg loop with red color helps to put the harness on
• waist belt webbing is in red as well for easier orientation in the harness
• dorsal plastic plate with different color according the size of the harness (S – yellow, UNI – red)
• construction ensures long-time operation and efficiency (easy releasing and fastening even when dirty and tough webbing)
• Rear dorsal plate for easy size identification. Yellow = Small. Red = Universal Sizing
• Weight: 1050g
• Size: S (110-150cm/43.3in -59in)/UNI (150cm-200cm/59in-79in)

Learn More

CMI RTTROLLEY Rapid Transit ZiplineTrolley, Stainless Steel sideplates, two 2" Stainless sheaves, Bearing, and Stainless Steel axle. Taking from the popularity of their velocity zipline trolley, CMI has launched a 2" wheel version, the RT zipline Trolley. Learn More

William Carabiner, Available with manual locking system (SCREW-LOCK) or automatic locking system (BALL-LOCK, TRIACT-LOCK). Learn More

Easy-to-operate semi-automatic belay device with assisted braking and maximum safety for sport and indoor climbing. Learn More

The Kong KKR Via Ferrata set comes complete with carabiners, and is simply attached to the harness using a lark's foot Learn More

The Kong "Y" Rescue Lark's Foot is an asymmetric security loop in Y-shape of 13mm tape for self-securing canyoning. Learn More

Used as spacers or supports under screw or bolt heads. Our washers are heat treated galvanized. Learn More

Voltige Chest Harness will also increase your "hang" comfort and keep your body in an upright position in case of a fall. Must use with a Sit Harness. Learn More

Ultra lightweight compact pulley designed for a variety of uses. Learn More

Deep Cut Pole Auger Bits Learn More

Kong Futura Hand Ascender, It is extremely small though easy to use, weighs only 125g, and comes with two different sized handles for ergonomic customisation Learn More

Haul kit for pickoffs, making a releasable anchor, or tensioning a system, thanks to its 4:1 mechanical advantage and excellent efficiency (sheaves with sealed ball bearings). Learn More

CMI Comtrolley Companion Trolley Pulley, Works best paired with the CMI Velocity Micro Trolley or Rapid Transit Trolley but it can be used by itself or as a companion for any of the other CMI cable trolleys. Learn More

Kong Eko Harness, Work and positioning harness espically designed for Fire Brigades but can be used for adventure parks, climbing and mountaineering via ferrata. Learn More

Can be combined with an ABSORBICA energy absorber to set up an energy-absorbing «I» or «Y» lanyard of less than two meters in length Learn More

KONG FUTURA MINI HAULER Low friction pulley fitted with a caming device to aid in hauling. Great for hauling on big walls, glacier rescue, or self rescue in the vertical world. Learn More

CMI "Beast" Tour Trolley Pulley, Designed for the fast lane of zip line tours, this trolley features a front bumper, reinforced 'crimped' side bars and forward facing design with drop down handles. Learn More

An excellent choice for shore-based responders, this cost-effective polypropylene throwline features hollow-braid construction, which makes it easy to handle and stuff into throw bags. Learn More

The Singing rock V safety zip line lanyard designed to keep you connected to your protection at all times. “V” design allows you to stay connected while passing protection points. Learn More

Lock washers are a critical component to through bolts on wood poles. Pole shrinkage mandates the use of double coil lock washers to keep pressure on the nut and bolt to prevent loosening. Learn More

Stainless Steel sideplates, two 2" Stainless Steel sheaves, Bearing, and Stainless Steel axle. Learn More

The symmetrical aluminum OK carabiner has an oval shape that allows optimal positioning of equipment with a wide section. Its Keylock system facilitates manipulations. Learn More