Back to Top
Search results for: 'Zip Line Trolley Braking System' AND 2*3*8=6*8 AND '9wXy'='9wXy'
-
Head Rush zipSTOP Brake Trolley Catch Accessory Kit Upgrade$150.48The Catch Accessory is designed to keep the Impact Trolley and zipSTOP Brake Trolley attached after contact with each other, making for easier rider retrieval. Learn More -
Maillon Rapid: Quick LinkAs low as $4.90Mailion Rapid Links (aka "Rapides" or "Quick-Links") are steel screw-links designed for fastening lengths of chain together on ropes courses and zip lining. They provide critical connections for trolleys, balay devices, cables and cable hardware on a zip line. Learn More
-
Machine BoltsAs low as $5.45Our Machine Bolts are hot dip galvanized, forged steel, quenched and tempered and are sold with hex nuts attached. Round or square washers and lock washers can be added separately. Learn More
-
5/8" Zip Pulley lanyardAs low as $24.53
Multiline 3-Strand Spliced Rope Zip Line Lanyards (tethers). Plastic teardrop shaped thimble on each end.
Learn More -
Canopy Tour Trolley: Zip Line Pulley$220.00Stainless Steel sideplates, two 2" Stainless Steel sheaves, Bearing, and Stainless Steel axle. Learn More
-
Head Rush zipSTOP Replacement Braking Line$211.20The zipSTOP Zip Line Brake is fitted with a braking line that can be replaced in the field easily by the owner using the Replacement Braking Line. Learn More
-
ELIA: Women's climbing and mountaineering helmetAs low as $84.65The ELIA helmet was designed and developed to respond specifically to the needs of women. The innovative OMEGA headband system (Petzl patent) allows the helmet to be put on and removed easily and offers maximum comfort. In addition to this exclusive feature, the helmet has a new headband adjustment mechanism. It allows the helmet to be precisely adjusted for different head shapes. Learn More
-
CMI UltrabrakeAs low as $224.40CMI Ultrabrake, Designed for hard use and maximum UV resistance, the material has a low friction coefficient and is self-lubricating with a non-adherent surface. Learn More
-
/12" Carriage Bolt w/Nut & WasherAs low as $1.82Carriage Bolt w/Nut & Washer, The square neck under the round head will seat into the hole in the wood to prevent the head from turning. Because they are used with wood, carriage bolts are rarely high strength and virtually always supplied in a standard ASTM A307 specification. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Eye 5/8" x 12"$20.35Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Hook-Hook 5/8" x 12"$20.35Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Hook 5/8" x 12"$20.35Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Jaw 5/8" x 12"$20.35Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Jaw 5/8" x 12"$20.35Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Hook 5/8" x 12"$20.35Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Eye 5/8" x 9"$18.65Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Hook 5/8" x 9"$18.65Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Jaw 5/8" x 9"$18.65Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Jaw 5/8" x 9"$18.65Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Hook 5/8" x 9"$18.65Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Hook-Hook 5/8" x 9"$18.65Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Thimbles: Stainless Steel ThimblesAs low as $1.32Stainless Steel Thimbles, When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More
-
Head Rush zipSTOP IR Replacement Braking Line$330.00The Head Rush zipSTOP IR Zip Line Brake is fitted with a braking line that can be replaced easily in the field by the owner using the Replacement Braking Line. Learn More
-
Petzl TRAC GUIDE Zip Line Trolley$208.95Learn More
The Petzl TRAC GUIDE is a trolley designed for adventure parks. Featuring an ergonomic captive carabiner, it allows the guide to quickly install the trolley on the cable with one hand. Because the carabiner pivots, the trolley remains in position on the cable when it makes contact with the end brake of the zip line. The ends are equipped with protective impact surfaces to reduce the risk of pinched fingers, and two connector support grooves to help avoid abrasion from the cable. The JOKO and AVENTEX lanyards (sold separately) are directly integrated in the carabiner, limiting the risk of separation or loss. The carabiner’s reinforced construction provides greater resistance to damp and salty environments. Product life is extended with highly durable bearings and removable impact surfaces available as spare parts.
- Ergonomic captive carabiner allows the guide to quickly install the trolley on the cable with one hand
- Two aligned sheaves provide excellent stability on the zip line
- Because the carabiner can pivot, the trolley remains in position on the cable when it makes contact with the end brake of the zip line
- Front and rear impact surfaces limit the risk of pinched fingers
- Two positioning support grooves for the connectors limit abrasion from the cable
- JOKO or AVENTEX lanyards are directly integrated in the carabiner, limiting the risk of separating or losing the trolley/lanyard unit (Sold separately)
- Connect easily to the harness with the CARITRAC stowing accessory (included)
- Double-row ball-bearings offer optimal durability
- Carabiner with reinforced construction and hard anodization for greater resistance to damp and salty environments
- Impact surfaces optimize contact between the trolley and the end brake of the zip line
- Carabiner and impact surfaces are completely removable and available as replacement parts to extend the life of the trolley
- Also available in 5-packs
Specifications
- Cable diameter: 9 to 13 mm (may also be used on ropes)
- Material(s): Aluminum frame and carabiner, stainless steel sheave, nylon
- Maximum speed: 25 m/s
- Certification(s): CE EN 17109, CE EN 12278, UIAA
- Weight per unit: 425 g
-
Round Washers: galvanized washersAs low as $0.33Used as spacers or supports under screw or bolt heads. Our washers are heat treated galvanized. Learn More
-
Shoulder Eye Screw LagAs low as $6.53Shoulder Eye Screw Lag, Use for connecting hand lines, spiders webs to trees, etc. on challenge courses. Do not use in life support applications. Also used when wrapping cable around a tree. Learn More
-
Bungee Cord Shock CordAs low as $27.50Nylon Shock Cord consists of a stranded rubber core covered with braided fiber resulting in an elastic cord with consistent stretch and strength. The durable "bungee type" cord is covered with nylon. Learn More
-
-
GUY ANCHORS- Helix Ground AnchorsAs low as $65.05GUY ANCHORS- Helix Ground Anchors, Multiple sizes and capacities allow precise designs for the adventure and zip line industry. There may be one or multiple guywires that can be resisted by one or multiple guy wire anchors, dictated by design and load requirements. Learn More
-
Adjustable Lobster Claws w/ Snap Hooks and Tri Fold and Girth Hitch$107.80Adjustable Lobster Claws w/ Snap Hooks and Tri Fold and Girth Hitch Learn More
-
NUTS: for 5/8" - 3/4" Eyebolts, Machine BoltsAs low as $2.20Forged Nut Eye bolts are the backbone of ropes challenge course and zip line construction. Zip line and other cables are terminated to the eye bolt around a thimble to prevent cable deformation at the turn back. Learn More
-
Thimble Eye BoltsAs low as $9.24Thimbleye® bolts are forged in two styles, straight and bent at a 45° angle. The broad radius of the eye provides an excellent attachment point to dead-end or guy messenger wire, guy strand or formed wire grips. Learn More
-
Wire Rope_Ropes Course_Zipline Cable: 3/8" Wire RopeAs low as $0.79Our Galvanized Aircraft Zip Lining Cable is made in accordance with Federal Specification RR-W-410D, meeting the dimensional and strength requirements of MIL-W-83420D. Learn More
-
Cypher ARC Rappel and Belay Device$19.79GREAT ECONOMICAL BELAY DEVICE. If you are looking for a good ATC style belay device, this is it: Cypher ARC Rappel and Belay Device. Crafted from high-density aircraft-grade aluminum, the ARC is engineered to keep your rope running smoothly through the device for quick payouts and long rappels. Learn More
-
CMI "Beast" Tour Trolley Pulley$501.55CMI "Beast" Tour Trolley Pulley, Designed for the fast lane of zip line tours, this trolley features a front bumper, reinforced 'crimped' side bars and forward facing design with drop down handles. Learn More
-
5/8 NUT EYE BOLTSAs low as $7.65Nut Eye bolts are the main bolts used in ropes challenge course and zip line construction. Zipline and other cables are terminated to the eye bolt around a thimble to prevent cable deformation at the turn back. Learn More
