Search results for: 'stapl carabiner sing'
- Did you mean
- small carabiner size
- sterl carabiner sing
-
LEAP Anchor -As low as $10.95Zip Line LEAP Anchor, A high-strength, multi-purpose anchor that can be used equally well as self-belay anchors on staple climbs or as the ideal termination fitting on belay cables anywhere where the cable load is at 90° to the angle of the bolt Learn More
-
Rope Ladders: Custom Rope Ladder$21.05
The Rope Ladder provides moderately challenging access to high elements or an alternative to staple climbs. Constructed of double lashed hardwood dowels with waxed nylon cord to increase durability. Professional installation required.
Cost is by: LINEAR FOOT
Learn More -
Franklin Work Positioning Harness$181.50
- The Franklin seat provides more long-term comfort over the course of a long workday than hanging in a harness does.
- Excellent additon for use with accessability and universal climbing programs
- It is intended for use with Singing Rock's fall arrest or work positioning harnesses or equivelant.
- It is easy to adjust with Rock and Lock buckles.
- Wide sitting area ensures good stability and allows for comfortable hanging, as well as standing work positions.
- Three D-rings (bearing capacity 50kg) for gear suspension.
- Weight: 1650 grams/58 oz
-
JP Step II Pole Step / Tree Step$42.24
Just Perfect Pole Steps : JP Step II
The JP Step I and JP Step II are Pole/Tree steps and fall protection anchor in one (think integrated LEAD anchor). Installs with 5/8" x 6" lag in poles and 5/8" x 8" lag in trees for the JP I and II. The JP R uses a Specialty 4" Lag Bolt and plate that comes with it. Supports over 5,000 lbs when properly installed. A great alternative to traditional pole steps and staples. These pole/tree steps are easily installed (about one minute). They also provide great positive climbing aids for hands, feet, and safety anchors. JP Steps for trees and poles are the best looking and safest integrated step - fall protection anchor for ropes courses, challenge courses, and zip line access.
Learn More -
Petzl Vrillee Hanger$7.85The Petzl Vrillee hanger is for direct aid. It holds the carabiner parallel to the rock face allowing the rope to run easily through the carabiner. With 8mm bolt Learn More
-
Edelrid HMS Strike Slider 5 Pack$131.67Innovative HMS carabiner with automatic locking mechanism. Learn More
-
ROPE: Three Strand Polydacron - Import RopeAs low as $1.21
3 Strand Import Polydacron Rope combines filament and staple/spun polyester wrapped around a polyolefin core to produce a rope with considerably lower stretch, better wear life and superior handling characteristics.
- Color: White/Red
- Material: Polyester Blend
- Construction: 3 Strand
- Easy to splice
- Ideal for Element Construction
-
Petzl Rollclip$52.73Pulley carabiner, available in versions with or without TRIACT-LOCK locking system. Learn More
-
Edelrid Mega Jul Belay Kit$85.73The Mega Jul Belay Kit with our Mega Jul belay device and the HMS Strike FG Carabiner. Learn More
-
Petzl Captiv$28.97The CAPTIV positioning bar favors loading of the carabiner along its major axis, limits flipping and keeps it integrated with the device or lanyard. Learn More
-
Petzl Trac Plus Zip Line Trolley$211.13TRAC PLUS Zip Line Trolley, They cannot be dropped, thanks to the VERTIGO WIRE-LOCK carabiner, simplifying their functionality Learn More
-
Petzl Kit Corax$131.93Climbing kit containing CORAX harness, belay system with Am'D carabiner and VERSO belay-rappel device, BANDI chalkbag and POWER BALL chalkball Learn More
-
Edelrid HMS Strike Screw 5 Pack$98.67Very compact and lightweight HMS carabiner. Ideal for alpine climbing. Learn More
-
PETZL FREINO$65.93It provides increased friction for single ropes when rappelling or lowering, without extra gear or the need to open the carabiner Learn More
-
Petzl AM'D Pin-Lock$40.85The Am'D PIN-LOCK asymmetrical aluminum carabiner is designed for use with groups. It secures the connection of the user thanks to its PIN-LOCK system, which can only be opened by the operator with a specific unlocking tool. Learn More
-
Petzl Coudee Hanger$6.53Petzl's Coudee hanger holds the carabiner perpendicular to the rock face, holding the rope away from the rock. The hanger includes an 8mm bolt. Learn More
-
A.L.F. AUTO BELAY/LOCKING PULLEYAs low as $471.90This innovative, all-in-one Pulley/Auto belay for fall protection is lightweight and easy to use. Auto belay pulley Locks in either direction (right or left) while climbing up or down. Learn More
-
ROPE: MULTILINE II Ropes Course RopeAs low as $1.21
Teufelbergers - New England Ropes 3 Strand Multiline II is a unique construction that combines filament and staple/spun polyester wrapped around a polyolefin core to produce a rope with considerably lower stretch, better wear life and superior handling characteristics.
- Color: White/Orange
- Material: Polyester Blend
- Construction: 3 Strand
- Easy to splice
- Ideal for rigging
-
Petzl P42 CaritoolAs low as $14.25Petzl P42 Caritool, A carabiner-shaped tool holder designed to organize gear attached to a harness. Ice-screws, pitons, cams, as well as small tools, can be arranged and accessed single-handedly Learn More
-
Large D Twistlock -ANSI$25.38This Large Twistlock carabiner has a key gate opening for smooth clips and unclips. No more snagging on ziplining harnesses, cables, gear or bolts. Learn More
-
Petzl Express SlingAs low as $7.85Petzl Express Sling, The ergonomic shape of the EXPRESS webbing offers excellent grip when working a route. The STRING allows the carabiner to be held in position and protects the webbing from wear. Learn More
-
Liberty Steel Modified "D"As low as $10.96Liberty Modified "D" zip lining carabiners are heat-hardened to hold 50kN and nickle palted to withstand intense abuse. Screw gate, Twist Lock and our three-stage Auto lock versions give you the right tools to work and play safe. individually tested. Learn More
-
Cable Drop PlateAs low as $12.93Cable Drop Plate, The lower 1" tie-in hole allows easy attachment of a carabiner or quicklinks. Hot dip galvanized for lasting durability. Cable drop plates are great for giant ladders, giant swings, rope climbs, tire crossings or just about any ropes course element Learn More
-
Kong K.K.R Via Ferrata$145.13The Kong KKR Via Ferrata set comes complete with carabiners, and is simply attached to the harness using a lark's foot Learn More
-
Petzl Basic Ascender$92.33Petzl Basic Ascender, The BASIC is a compact ascender that offers excellent grip for rope ascents. The lower attachment hole is large enough to hold the carabiners for the lanyard and the footloop. Learn More
-
CMI Rescue 8 Ring - Rescue Figure 8 - Large Figure 8$64.90The original all around Rescue 8! Handles multiple carabiners, large ropes, anti-lock ears, and duel clip in holes. Learn More
-
JP Steps Removable Pole Steps- No Plate and Lag$20.35
Just Perfect Pole Steps : JP Steps Removable utility pole and tree steps. This is the step only. These steps can replace common utility pole steps that have an upturned hook end.
Learn More -
Snap Hook - Industrial Snap Hooks$16.50Snap hooks are recommended as they are easier for small hands, more ergonomically friendly and are permanently attached to the lobster claws. Learn More
-
JP Steps Removable Pole Steps - With Lag and Plate$27.45
Just Perfect Pole Steps : JP Steps Removable utility pole and tree steps
Learn More -
First Aid Bag for Harnesses$26.35
Compact and light first aid bag with reflective zippers for increased visibility and easy access. The inside is designed with different size compartments and zippered mesh pocket. Velcro attachment loops allow easy and safe attachment to a harness or backpack. Includes an emergency whistle. First Aid contents are not included.
- Size: 13 cm x 10 cm x 5 cm
-
RESCUE FIGURE 8$49.49
The Rescue Figure 8 is a special figure 8 for rescue situations and fast rappeling. It has a special shap for multiple rope locking, allows rappeling with heavy loads, has a high strength, and fits a wide range of rope diameters. Available in light alloy or stainlees steel.
- Weight: 154g, 5.43oz (alloy) 451g, 15.9 oz (stainless steel)
- Material: Light alloy or stainless steel
- Strength: 40kN
-
Tarzan Economic Universal Full Body Harness$142.95
Fully adjustable full body harness intended for rope courses and adventure parks.
- CE 1019, EN12277, EN161
- front attachment point for belaying and rappeling according to EN 12277 type C
- waist belt and the leg loops without the padding enables to put the harness to every person
- rear steel D-ring with a bearing capacity of 15 kN according EN 361
- waist belt, shoulder straps and the leg loops are easily adjustable with easy lock buckles
- red webbing strap stitched into the buckles simplify handling with them
- all steel components are finished with E-coating technology for higher corrosion resistance
- left leg loop with red color helps to put the harness on
- waist belt webbing is in red as well for easier orientation in the harness
- dorsal plastic plate with different color according the size of the harness (S – yellow, UNI – red)
- construction ensures long-time operation and efficiency (easy releasing and fastening even when dirty and tough webbing)
- Rear dorsal plate for easy size identification. Yellow = Small. Red = Universal Sizing
- Weight: 1050g
- Size: S (110-150cm/43.3in -59in)/UNI (150cm-200cm/59in-79in)
-
TECHNIC - ANSI FULLBODY HARNESS$197.95
A fully adjustable, full body harness for work positioning and fall-arrest. Padded hip belt and leg loops for comfort. Available in Easy Lock buckle or Speed Lock buckles. NFPA version includes Speed Lock buckles and all steel components and attachment points.
Learn More- Independently adjustable leg loops and shoulder straps
- Front and rear (dorsal) attachment point for descender placement or work positioning (EN813)
-
Lateral attachment points in accordance with EN 358
- Steel D-rings are movable into "parking position" avoiding being caught-up while in use
- Easy-Lock buckles enable fluent and fast adjustment to fit to users body
-
Slots designed to secure hanging equipment
- Identification and methodical label
- Chest attachment point according to EN 361
- D-ring, flat and padded dorsal attachment point according to EN 361
- Weight: 1620 grams / 57 oz
-
CE 1019, EN 358, EN 813, EN 361
-
Edelrid HMS Strike Slider 5 Pack$131.93Innovative HMS carabiner with automatic locking mechanism. Learn More
-
Edelrid HMS Strike Screw 5 Pack$72.27Very compact and lightweight HMS carabiner. Ideal for alpine climbing. Learn More
-
Petzl TRAC GUIDE Zip Line Trolley$208.95Learn More
The Petzl TRAC GUIDE is a trolley designed for adventure parks. Featuring an ergonomic captive carabiner, it allows the guide to quickly install the trolley on the cable with one hand. Because the carabiner pivots, the trolley remains in position on the cable when it makes contact with the end brake of the zip line. The ends are equipped with protective impact surfaces to reduce the risk of pinched fingers, and two connector support grooves to help avoid abrasion from the cable. The JOKO and AVENTEX lanyards (sold separately) are directly integrated in the carabiner, limiting the risk of separation or loss. The carabiner’s reinforced construction provides greater resistance to damp and salty environments. Product life is extended with highly durable bearings and removable impact surfaces available as spare parts.
- Ergonomic captive carabiner allows the guide to quickly install the trolley on the cable with one hand
- Two aligned sheaves provide excellent stability on the zip line
- Because the carabiner can pivot, the trolley remains in position on the cable when it makes contact with the end brake of the zip line
- Front and rear impact surfaces limit the risk of pinched fingers
- Two positioning support grooves for the connectors limit abrasion from the cable
- JOKO or AVENTEX lanyards are directly integrated in the carabiner, limiting the risk of separating or losing the trolley/lanyard unit (Sold separately)
- Connect easily to the harness with the CARITRAC stowing accessory (included)
- Double-row ball-bearings offer optimal durability
- Carabiner with reinforced construction and hard anodization for greater resistance to damp and salty environments
- Impact surfaces optimize contact between the trolley and the end brake of the zip line
- Carabiner and impact surfaces are completely removable and available as replacement parts to extend the life of the trolley
- Also available in 5-packs
Specifications
- Cable diameter: 9 to 13 mm (may also be used on ropes)
- Material(s): Aluminum frame and carabiner, stainless steel sheave, nylon
- Maximum speed: 25 m/s
- Certification(s): CE EN 17109, CE EN 12278, UIAA
- Weight per unit: 425 g



































