Search results for: 'string 6mm auto bolt prusik'

Compact pulley offering a lightweight solution for setting up progress capture systems. Learn More

High-strength pulley designed for rescue professionals to set up progress capture systems. Learn More

Petzl Absorbica Fall Arrest Lanyard. The total length of the fall arrest system including the ABSORBICA must not be greater than 2 meters, as specified in the EN 354 and EN 355 standards Learn More

High-strength double pulley designed for rescue professionals to set up progress capture systems of high mechanical advantage. Learn More

Asymmetrical Y-shaped sewn lanyard made of flat webbing, * Used with an ASCENSION handled rope clamp for progression on a rope, * Asymmetrical Y-shape for ease of movement: Learn More

Petzl Cheville Autoforeuse 12 mm diameter for an 8 mm threaded bolt Bolt with integrated drill Learn More

Square Curved Washers for nut eye bolts and machine bolts. Galvanized Square washers designed for outdoor use in challenge courses, zip lines and other outdoor applications. Learn More

Snap hooks are recommended as they are easier for small hands, more ergonomically friendly and are permanently attached to the lobster claws. Learn More

EYE NUTS and EYELETS, Eyelets, also known as Bolt Eyes, are used under the head or nut of a bolt. All are compatible with the strength of the bolts used with them. Learn More

Lock washers are a critical component to through bolts on wood poles. Pole shrinkage mandates the use of double coil lock washers to keep pressure on the nut and bolt to prevent loosening. Learn More

Used as spacers or supports under screw or bolt heads. Our washers are heat treated galvanized. Learn More

Head Rush FlightLine is an extreme free fall ride for theme parks, adventure parks, and carnivals that takes jumpers to heights never before dreamed. Learn More

The Head Rush quickFLIGHT Free Fall Device gives riders the sensation of a “free fall” while comfortably lowering them to the ground.

Learn More

Nail Chipper Tri-Cut Auger Bits, Typically when drilling a hole for a through bolt as used in ropes course or zip line construction, you will need to drill a hole 1/16" bigger than the bolt you are using. 5/8" bolt requires a 11/16" hole. These are all 18" long bits. 7-1/2" are available by request. Learn More

Petzl Shunt Ascender, It locks onto either a single rope or double ropes of the same diameter and holds well on icy and muddy ropes. Learn More

Intended for high-load applications that normally call for a lifeline, but also require a rope that floats, Learn More

Designed to be the ultimate, general purpose rock climbing, rescue or ropes course carabiner, the CMC Rescue Steel Locking D combine CMC's experience in rescue with Omega Pacific's manufacturing expertise. Learn More

Petzl's Coudee hanger holds the carabiner perpendicular to the rock face, holding the rope away from the rock. The hanger includes an 8mm bolt. Learn More

This Large Twistlock carabiner has a key gate opening for smooth clips and unclips. No more snagging on ziplining harnesses, cables, gear or bolts. Learn More

The Petzl Vrillee hanger is for direct aid. It holds the carabiner parallel to the rock face allowing the rope to run easily through the carabiner. With 8mm bolt Learn More

If you plan to wrap the cable around a tree or post and not use bolt a tree wrap is what you need. Learn More

Liberty Large Steel "D" Carabiner . Large gate opening (1"). Big basket! Great for clipping lots of things at once or clipping into bulky harnesses or large diameter ropes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

CMI Trolley Brake Block, The striking surface is crafted from ultra-high molecular weight polyethylene, noted for it's exceptional wear resistance. Steel hardware and a galvanized eye bolt round out the package Learn More

Detachable Pole and Tree Step, These are the preferred security steps for ropes challenge courses either rin trees or poles. Lag bolt and plate are installed into a ropes course pole or tree. Learn More

Designed for use on Challenge ropes course/Zip Lining traverses, on cable or rope. Super strong with a 10,000 rating and a sheathed back up bolt. Stainless steel sides make this cable pulley bomb proof. Learn More

A very popular tactical spec carabiner that meets your requirement for a stealthy carabiner with a minimum weight and size. The nut locks on gate to prevent jamming. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More