Back to Top
Search results for: 'fusion adventur sterl tool'
- Did you mean
- fusion adventur steps tool
- fusion adventur stapl tool
-
Tarzan Economic Universal Full Body Harness$142.95Fully adjustable full body harness intended for rope courses and adventure parks.
- CE 1019, EN12277, EN161
- front attachment point for belaying and rappeling according to EN 12277 type C
- waist belt and the leg loops without the padding enables to put the harness to every person
- rear steel D-ring with a bearing capacity of 15 kN according EN 361
- waist belt, shoulder straps and the leg loops are easily adjustable with easy lock buckles
- red webbing strap stitched into the buckles simplify handling with them
- all steel components are finished with E-coating technology for higher corrosion resistance
- left leg loop with red color helps to put the harness on
- waist belt webbing is in red as well for easier orientation in the harness
- dorsal plastic plate with different color according the size of the harness (S – yellow, UNI – red)
- construction ensures long-time operation and efficiency (easy releasing and fastening even when dirty and tough webbing)
- Rear dorsal plate for easy size identification. Yellow = Small. Red = Universal Sizing
- Weight: 1050g
- Size: S (110-150cm/43.3in -59in)/UNI (150cm-200cm/59in-79in)
-
CMI Twin Expedition Arborist Ascender$226.55CMI Twin Expedition Arborist Ascender, The Twin Expedition is the first single-handled dual ascender designed to meet the needs of industry leading arborist professionals. The EXPTWIN easily accommodates three rope techniques - 2:1 doubled rope technique (DdRT), 1:1 single rope technique (SRT), and 1:1 twin line ascent (DbRT). Learn More
-
Removable Climbing Hold - Flush Mount -Removable Hold - With Bracket - Concrete$75.85
Removable climbing holds have been machined not to overlap the baseplate. Building this product is a complicated process using climbing holds intentionally designed for the baseplate and key. We recommend you purchase this fully assembled version.
If a climbing hold overlaps the baseplate, it will not meet commercial playground standards. Other products in the industry have their climbing holds overlapping the baseplate.
Once the base plate is attached to your wall, no tools are required to remove and reinstall the hold assembly. A removable climbing hold is ideal when your wall is not in use and you must prevent access to meet ACCT/CPSI standards.
To install, screw the baseplate to the wall, insert the key/climbing hold into the top of the slot and slide the climbing hold down to the bottom of the bracket.
- Plate dimensions are 4-3/4" at the widest x 6-1/2" tall.
- One rock climbing hold and bracket assembly included.
- This product comes fully assembled and includes attachment screws.
- Insert into the slot and slide down to lock in place.
- Slide up and lift out of the slot for easy removal.
- Ten different designs, which are all jugs.
- Large base plate to accommodate large holds and meet ASTM, ACCT, CPSI, and CSA standards.
-
-
Head Rush TRUBLUE Auto BelayAs low as $2,414.50An auto belay is an automatic belay device that eliminates the need for a human belayer. In the case of the Head Rush TRUBLUE Auto Belay, it uses Head Rush's patented self-regulating braking system, which is enabled by non-contacting magnetic braking technology. Learn More
-
Petzl TRAC GUIDE Zip Line Trolley$208.95Learn More
The Petzl TRAC GUIDE is a trolley designed for adventure parks. Featuring an ergonomic captive carabiner, it allows the guide to quickly install the trolley on the cable with one hand. Because the carabiner pivots, the trolley remains in position on the cable when it makes contact with the end brake of the zip line. The ends are equipped with protective impact surfaces to reduce the risk of pinched fingers, and two connector support grooves to help avoid abrasion from the cable. The JOKO and AVENTEX lanyards (sold separately) are directly integrated in the carabiner, limiting the risk of separation or loss. The carabiner’s reinforced construction provides greater resistance to damp and salty environments. Product life is extended with highly durable bearings and removable impact surfaces available as spare parts.
- Ergonomic captive carabiner allows the guide to quickly install the trolley on the cable with one hand
- Two aligned sheaves provide excellent stability on the zip line
- Because the carabiner can pivot, the trolley remains in position on the cable when it makes contact with the end brake of the zip line
- Front and rear impact surfaces limit the risk of pinched fingers
- Two positioning support grooves for the connectors limit abrasion from the cable
- JOKO or AVENTEX lanyards are directly integrated in the carabiner, limiting the risk of separating or losing the trolley/lanyard unit (Sold separately)
- Connect easily to the harness with the CARITRAC stowing accessory (included)
- Double-row ball-bearings offer optimal durability
- Carabiner with reinforced construction and hard anodization for greater resistance to damp and salty environments
- Impact surfaces optimize contact between the trolley and the end brake of the zip line
- Carabiner and impact surfaces are completely removable and available as replacement parts to extend the life of the trolley
- Also available in 5-packs
Specifications
- Cable diameter: 9 to 13 mm (may also be used on ropes)
- Material(s): Aluminum frame and carabiner, stainless steel sheave, nylon
- Maximum speed: 25 m/s
- Certification(s): CE EN 17109, CE EN 12278, UIAA
- Weight per unit: 425 g
-
-
