Search results for: 'cmc rescue rate pack'
- Did you mean
- cm rescue rope pack
- cm rescue rate pack
-
-
Petzl Demi Rond Quick Ling$35.57When closed with a wrench, this aluminum quick link is used to close harnesses that have two attachment points that must be joined with a connector. Learn More
-
Edlerid Shield Lite Helmet$131.93An ultra-light, In-Mold helmet with a robust webbing closure system. The lightweight design and excellent ventilation make it suitable for both sport climbing and mountaineering. Learn More
-
Square Curved and Square Flat WashersAs low as $2.20Square Curved Washers for nut eye bolts and machine bolts. Galvanized Square washers designed for outdoor use in challenge courses, zip lines and other outdoor applications. Learn More
-
CMI Swivel$135.25
Rescue Swivel helps to eliminate twisting in critical lines due to load rotation. Its 9000lb (40kN) MBS gives you piece of mind when moving the heaviest of loads, and its sealed ball bearing will keep it operating smoothly for years.
*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition. *Not Certified*
Size: 4 1/4" x 1 3/4"
Learn More
Weight: 5.6 oz
Breaking Strength: 9,000 pounds -
Edelrid Wing Harness$105.53Comfortable alpine harness with adjustable leg loops and laminated harness construction. Learn More
-
Aspir Adjustable Harness$92.33Aspir Adjustable Harness, Its low bulk and large range of adjustability also make it great for mountaineering and glacier travel. A great harness too for via ferrata and adventure parks. Learn More
-
Head Rush Impact Zip Line Trolley$196.68The Impact Trolley is the only trolley on the market engineered specifically for smooth and consistent impact braking with the zipSTOP Zip Line Brake system. Learn More
-
Petzl Delta Quick Link$9.17When closed with a wrench, this steel quick link becomes a semi-permanent anchor ring. Learn More
-
A.L.F. AUTO BELAY/LOCKING PULLEYAs low as $471.90This innovative, all-in-one Pulley/Auto belay for fall protection is lightweight and easy to use. Auto belay pulley Locks in either direction (right or left) while climbing up or down. Learn More
-
Petzl Vertigo Carabiner$32.93The VERTIGO TWIST-LOCK carabiner is designed for use on progression lanyards. Its ergonomic design and automatic locking system facilitate manipulations when passing intermediate anchors. Learn More
-
Petzl Kit Corax$131.93Climbing kit containing CORAX harness, belay system with Am'D carabiner and VERSO belay-rappel device, BANDI chalkbag and POWER BALL chalkball Learn More
-
Petzl Pandion Harness$76.95Petzl Pandion Harness, Adjustable leg loops allow size to be adjusted depending on comfort desired or layers of clothing worn and permit the harness to be put on when wearing skis or crampons Learn More
-
Petzl Corax Harness$79.13The CORAX is the versatile harness par excellence: easy to use and comfortable, it is designed for rock climbing, mountaineering or via ferrata. Learn More
-
-
AVAO BOD HarnessesAs low as $451.39AVAO BOD Harnesses, The harness also facilitates carrying and organization of tools with multiple equipment loops and retainers for attaching CARITOOL tool holders and TOOLBAG tool-holder pouches. Learn More
-
Petzl Jag System$395.93Haul kit for pickoffs, making a releasable anchor, or tensioning a system, thanks to its 4:1 mechanical advantage and excellent efficiency (sheaves with sealed ball bearings). Learn More
-
Head Rush zipSTOP IR/ zip STOP IR Zip Line Braking System$6,468.00The best brake for your zip line,Head Rush zipSTOP Zip Line Brake uses Head Rush's self-regulating eddy current magnetic braking system to brake zip line riders smoothly, comfortably, and consistently, even at high speeds. Learn More
-
SINGING ROCK PROFI WORKER 3D STANDARD HARNESS$258.45
Fully adjustable harness for work positioning withcontinuous adjustable webbing, SPEED buckles, padded wide waist belt, anatomicleg loops and shoulder straps.
- super comfortable wide waist belt padding provides maximum comfort when working at height
- strength webbing on the waist belt is stitched in the way that at normal working situation the body weight is absorbed by the padding only
- reflective strap and printing on the waist belt and a reflective strap on the shoulder padding increase the visibility in dark working conditions (the black version of the harness is not equipped with the reflective elements)
- anatomic leg loops and waist belt are covered with strong PES fabric providing high abrasion resistance
- standard easy lock buckles enable smooth adjustment
- narrowed padding and webbing on the shoulder straps in a neck area enhance comfortable work
- leg loops connection straps made from durable PES webbing for better abrasion resistance
- front and back attachment points for fall arrest according to EN 361 marked with additional “A“ marking
- flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus
- front lower attachment point for descender placement or work positioning according to EN 813
- 2 side attachment points for work positioning according to EN 358
- 4 ergonomic braided gear loops with a bearing capacity of 5 kg
- heavier items up to 35 kg can be attached to the webbing on the waist belt
- additional loops on the waist belt and leg loops with a bearing capacity of 5 kg offer additional space for the gear and better gear organization
- wide elastic band at left shoulder strap for the gear attachment (e.g. transmitter)
- slots at the waist belt for Porter tool holder to carry your industrial tools
- shoulder attachment points for confined space rescue according to EN 1497
- chest ascender smart fixation system (using an additional maillon), works best with Cam Clean
- all steel components finished with E-coating for higher corrosion resistance
- identification and methodical label
- Weight: 177g, 62.68oz
- Max Rated Load: 150 kg
- Certifications: EN 358, EN 361, EN 813, EN 1497, CE 1019
-
Petzl Djinn Carabiner$13.13Petzl Djinn Carabiner, Rugged carabiner for crag climbing, available in straight and bent gate versions. Learn More
-
Petzl CANYON Harness$186.95Whitewater cascades, rappelling, caving, spelunking, swimming, jumping, ziplining... this is the domain of the CANYON harness. Rugged, non-absorbent materials ensure lightweight longevity for all your aquatic adventures. Learn More
-
-
Head Rush QUICKFlight Free Fall$3,953.40
The Head Rush quickFLIGHT Free Fall Device gives riders the sensation of a “free fall” while comfortably lowering them to the ground.
Learn More -
Petzl Newton Harness$237.53Fall arrest harness that is comfortable for work and easy to use. It offers ergonomic stowage of MGO connectors and has fall indicators. It is certified to North American, European and Russian standards. Learn More
-
-
Petzl OXAN Carabiner$20.83Rugged and compact, the OXAN carabiner is particularly suited for use in difficult conditions where weight is not an issue: setting fixed anchors, connecting to metal structures... Learn More
-
Petzl RIG - Compact self-braking descenderAs low as $263.93Compact self-braking descender, Lock off and work with minimum gear to tangle. The Petzl Rig is a proven performer for the zip line and ropes course construction industry. Learn More
-
Petzl Pantin Ascender$105.53Petzl Pantin Ascender, A big advantage for long rope ascents. With the Pantin Ascender supporting the foot, the body is held in a more upright position thus making the ascent faster and less tiring for the arms. Learn More
-
CHAIN PULLERS - LEVER HOISTS - 5' lIFTAs low as $204.00
HIT Lever hoists have a rugged contruction and a cover to protect the gear case and the brake equipment. The drop forged and heat treated alloy hooks are equipped with safety latches to ensure safety at all times. The steel handle rotates 360 degrees for operation in any posistion. The chain is made from high quality alloy steel and has been specially heat treated for high breaking stress and durability. This hoist has been tested 1.5 times its rated capacity.
- Designed for construction and industrial lifting and pulling applications.
- Rugged steel body construction, lightweight, compact and portable.
- Powder coat painted to protect against rust and corrosion.
- High Tensile alloy steel chain is heat treated for safety and low-wear.
- Shock resistant gear case and brake cover.
-
Mio Cable Grab for 3/8" Wire Rope$235.40
atented cable grabs are designed to provide fall protection for workers ascending or descending from a variety of ladders or vertical structures. The stainless steel cable grab is easily removed or repositioned along a cable. If a fall occurs, the cable grab is designed to immediately lock onto the cable and prevent a free fall. Sold with an integrated shock absorber. Users should be familiar with all warnings and instructions and receive training in the proper use of this device. Product Specs: Universal design Auto traveling operation Durable, lightweight stainless steel design Meets applicable OSHA Standards and ANSI requirements. Recommended lifelines 3/8″ diameter stainless steel or galvanized 7×19 aircraft cable (non-lubed) with minimum tensile strength of 8,000 lbs.
MUST be attached to worker’s harness using ANSI rated autolocking carabiner (NOT included)
Learn More -
Petzl Am'D CarabinerAs low as $20.08Petzl Am'D Carabiner - Add security to your climbing anchors with the Petzl Am'D Traict Locking Carabiner. Take your pick of Petzl's Screw-Lock, Ball-Lock, or Triact-Lock gate to perfectly match your preference. The Am'D Carabiner also has a snag-free keylock gate to assure it never snags on gear when you're building a solid anchor at the top of the pitch you just climbed. Learn More
-
Zippy Clip N Zip Trolley$236.45
The Zippey Trolley is bi-directional, so there’s no wrong way to fit it. Zippey offers a one handed action with either a single or double locking mechanism for increased safety.
Zippey has a speed rating of 60mph (90kph), which is based on the use of the same high spec deep groove, double row ball bearings, as used in our Zipspeed range. The expected life of the bearings should be more than 1000 miles (1500km).
Accessories available for the Zippey Trolleys
ARC – Anti Roll Back Cam. This innovative add on solves many of the issues associated with modern zip lines. Riders who reach the egress platform can roll back out onto the line requiring staff intervention. The ARC ensures that the rider remains in position over the egress platform by camming against the zip line cable maintaining their position.
Handle Accessory – There is now an available handle accessory for the Zippey making it possible for riders to ‘steer’ into the arrival station.
Learn More -
Petzl Sama Harness$76.95The SAMA harness is ideal for sport climbing and zip lining . With its EndoFrame construction, it provides excellent weight distribution around the waist and legs to ensure greater comfort. Learn More
-
Adjama Climbing HarnessAs low as $98.93Adjama Climbing Harness, Lightweight and very flexible, thanks to the Delta System leg loop front panels and small dimension leg buckles. Learn More
-
Petzl Selena Harness$90.15The elastic leg loops remain adjusted and offer complete freedom of movement. The DoubleBack Light buckle on the waistbelt ensures quick and easy adjustment. Learn More
-
Petzl TRAC GUIDE Zip Line Trolley$208.95Learn More
The Petzl TRAC GUIDE is a trolley designed for adventure parks. Featuring an ergonomic captive carabiner, it allows the guide to quickly install the trolley on the cable with one hand. Because the carabiner pivots, the trolley remains in position on the cable when it makes contact with the end brake of the zip line. The ends are equipped with protective impact surfaces to reduce the risk of pinched fingers, and two connector support grooves to help avoid abrasion from the cable. The JOKO and AVENTEX lanyards (sold separately) are directly integrated in the carabiner, limiting the risk of separation or loss. The carabiner’s reinforced construction provides greater resistance to damp and salty environments. Product life is extended with highly durable bearings and removable impact surfaces available as spare parts.
- Ergonomic captive carabiner allows the guide to quickly install the trolley on the cable with one hand
- Two aligned sheaves provide excellent stability on the zip line
- Because the carabiner can pivot, the trolley remains in position on the cable when it makes contact with the end brake of the zip line
- Front and rear impact surfaces limit the risk of pinched fingers
- Two positioning support grooves for the connectors limit abrasion from the cable
- JOKO or AVENTEX lanyards are directly integrated in the carabiner, limiting the risk of separating or losing the trolley/lanyard unit (Sold separately)
- Connect easily to the harness with the CARITRAC stowing accessory (included)
- Double-row ball-bearings offer optimal durability
- Carabiner with reinforced construction and hard anodization for greater resistance to damp and salty environments
- Impact surfaces optimize contact between the trolley and the end brake of the zip line
- Carabiner and impact surfaces are completely removable and available as replacement parts to extend the life of the trolley
- Also available in 5-packs
Specifications
- Cable diameter: 9 to 13 mm (may also be used on ropes)
- Material(s): Aluminum frame and carabiner, stainless steel sheave, nylon
- Maximum speed: 25 m/s
- Certification(s): CE EN 17109, CE EN 12278, UIAA
- Weight per unit: 425 g




































