Search results for: 'course keeper off size'

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

The handy alternative for shorter drops or lighter loads. To reduce weight, the rack is drawn from 5/16" stainless steel, and the solid bars are formed from anodized aluminum. Learn More

The handy alternative for shorter drops or lighter loads. To reduce weight, the rack is drawn from 5/16" stainless steel, and the solid bars are formed from anodized aluminum. Learn More

Serving Sleeves, These are usually in a 1x7 configuration: 1 bundle of 7 strands. Cable used in ropes courses and zip lines is usually 7x19 or 6x24: Much more flexible Learn More

The Zip Line Evo pulley system is the latest in new ropes course and zip line tailored equipment by Kong. The evolution of our first pulley with integrated connector, that avoids every possibility of mistake. Learn More

Petzl Rope Bucket, The Petzl Rope Bucket has a unique tapered design and thin layer of closed cell foam enable the bag to stand up by itself and stay open. Learn More

Cable Drop Plate, The lower 1" tie-in hole allows easy attachment of a carabiner or quicklinks. Hot dip galvanized for lasting durability. Cable drop plates are great for giant ladders, giant swings, rope climbs, tire crossings or just about any ropes course element Learn More

When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More

GUY ANCHORS- Helix Ground Anchors, Multiple sizes and capacities allow precise designs for the adventure and zip line industry. There may be one or multiple guywires that can be resisted by one or multiple guy wire anchors, dictated by design and load requirements. Learn More

PANJI adventure park/zipline harness is a one size harness covering a very wide range of body sizes. Learn More

Shoulder Eye Screw Lag, Use for connecting hand lines, spiders webs to trees, etc. on challenge courses. Do not use in life support applications. Also used when wrapping cable around a tree. Learn More

The PICCHU helmet is designed for children who want to rock climb or cycle. It is very light and comfortable and constructed for durability. For night use, the PICCHU has a mount on the back of the helmet specially designed for attaching the SiGNAL red signalization light Learn More

The VERTIGO WIRE-LOCK carabiner is designed for use on via ferrata lanyards along with zipline systems and ropes courses. Learn More

Petzl Shunt Ascender, It locks onto either a single rope or double ropes of the same diameter and holds well on icy and muddy ropes. Learn More

Apex is the workhorse of the MAXIM® product line. Designed for big wall and trad climbing or for working projects and developing routes, Apex makes an excellent rope for challenge courses and fall protection for safety personnel. Learn More

Holds the connector in place and protects the webbing from abrasion. Available in two sizes. Learn More

PANGA is a single-size helmet, durable and easy to use, designed for group and club use. Its FLIP&FIT system allows the headband size to be easily adjusted by an operator, or by the user. This system also offers protection for the headband during storage and transport. Learn More

Just Perfect Pole Steps : JP Step II

 

The JP Step I and JP Step II  are Pole/Tree steps and fall protection anchor in one (think integrated LEAD anchor). Installs with 5/8" x 6" lag in poles and 5/8" x 8" lag in trees for the JP I and II. The JP R uses a Specialty 4" Lag Bolt and plate that comes with it. Supports over 5,000 lbs when properly installed. A great alternative to traditional pole steps and staples.  These pole/tree steps are easily installed (about one minute). They also provide great positive climbing aids for hands, feet, and safety anchors. JP Steps for trees and poles are the best looking and safest integrated step - fall protection anchor for ropes courses, challenge courses, and zip line access.

Learn More

Six-point crampons, adaptable to all shoe sizes, used for moving over talus and snow- and ice-covered slopes. Learn More

Anti-slip soles, adaptable to all shoe sizes, used for moving over snow and frozen or slippery surfaces. Learn More

The classic high ropes harness. Fully-adjustable webbing harness that covers all sizes thanks to its six Easy-Glider buckles. Learn More

CMI Double Expedition Ascender, The cam is the same design as those in our now famous Ultrascenders and carries the same lifetime wear-out guarantee. Extra large handgrip opening easily accomodates gloved or mittened hands Learn More

We chose stainless steel over aluminum because of its "wearever" qualities. In order to compensate for the reduced friction inherent in stainless bars, we increased the radius of the friction surface to a full 1/2". Learn More

Rock Exotica enForcer Load Cell is a compact aluminum load cell that measures force up to 20 kN. Utilizing two sampling modes, the Enforcer is able to monitor systems, and log drop testing in high resolution. Learn More

The Head Rush Brake Trolley is a replacement for the brake trolley that came with your Head Rush zipSTOP Zip Line Brake. Please ensure that you select the correct size for your zip line cable. Learn More

Petzl Pandion Harness, Adjustable leg loops allow size to be adjusted depending on comfort desired or layers of clothing worn and permit the harness to be put on when wearing skis or crampons Learn More

This professional heavy-duty cutter cuts and fuses ends of polyester and nylon ropes and web quickly. Learn More

Symmetrical heavy duty oval in hardened zinc plated steel. Larger size and better gate clearance than traditional oval carabiners. Keylock, catch free, gate system for enhanced safety and function. Learn More

Fully adjustable full body harness intended for rope courses and adventure parks.

• CE 1019, EN12277, EN161
• front attachment point for belaying and rappeling according to EN 12277 type C
• waist belt and the leg loops without the padding enables to put the harness to every person
• rear steel D-ring with a bearing capacity of 15 kN according EN 361
• waist belt, shoulder straps and the leg loops are easily adjustable with easy lock buckles
• red webbing strap stitched into the buckles simplify handling with them
• all steel components are finished with E-coating technology for higher corrosion resistance
• left leg loop with red color helps to put the harness on
• waist belt webbing is in red as well for easier orientation in the harness
• dorsal plastic plate with different color according the size of the harness (S – yellow, UNI – red)
• construction ensures long-time operation and efficiency (easy releasing and fastening even when dirty and tough webbing)
• Rear dorsal plate for easy size identification. Yellow = Small. Red = Universal Sizing
• Weight: 1050g
• Size: S (110-150cm/43.3in -59in)/UNI (150cm-200cm/59in-79in)

Learn More

Deep Cut Pole Auger Bits Learn More

By incorporating a rigid stem on this belay/rappel device, climbers go from full lock-off to whipping out rope in a single, smooth action. No more binding up as the device tries to free itself. The amount of friction can be easily adjusted to suit your particular need. Climbing with fat ropes, a skinny partner or on low-angle slabs? Belay with the U-Grooves and clip into the bottom hole of the XF Forge for less friction. For the ultimate control, wrap that skinny cord around the rigid stem and rappel, figure-8 style.

Learn More

Lock washers are a critical component to through bolts on wood poles. Pole shrinkage mandates the use of double coil lock washers to keep pressure on the nut and bolt to prevent loosening. Learn More