Back to Top
Search results for: 'joko carabiners climbing carabiner 2 small autolock'
- Did you mean
- joko carabiners climbing carabiner 2 stapl autolock
-
Kong K.K.R Via Ferrata$145.13The Kong KKR Via Ferrata set comes complete with carabiners, and is simply attached to the harness using a lark's foot Learn More -
Large D Twistlock -ANSI$25.38This Large Twistlock carabiner has a key gate opening for smooth clips and unclips. No more snagging on ziplining harnesses, cables, gear or bolts. Learn More
-
/12" Carriage Bolt w/Nut & WasherAs low as $1.82Carriage Bolt w/Nut & Washer, The square neck under the round head will seat into the hole in the wood to prevent the head from turning. Because they are used with wood, carriage bolts are rarely high strength and virtually always supplied in a standard ASTM A307 specification. Learn More
-
A.L.F. AUTO BELAY/LOCKING PULLEYAs low as $471.90This innovative, all-in-one Pulley/Auto belay for fall protection is lightweight and easy to use. Auto belay pulley Locks in either direction (right or left) while climbing up or down. Learn More
-
Petzl Basic Ascender$92.33Petzl Basic Ascender, The BASIC is a compact ascender that offers excellent grip for rope ascents. The lower attachment hole is large enough to hold the carabiners for the lanyard and the footloop. Learn More
-
Robertson Cobra Zip Line TrolleyAs low as $266.20The "COBRA" cable pulley zip line trolley represents the most advanced design work using state of the art engineering techniques to build the safest and finest zip line trolley for the ropes course industry. Learn More
-
Beam Clamps: I-Beam ClampsAs low as $85.80They fit securely on a wide range of flange widths and beam sizes, with a built-in suspension bar that provides for close mounting. The clamp jaw design reduces flange stress by distributing the load away from the flange edge. Learn More
-
Petzl Express SlingAs low as $7.85Petzl Express Sling, The ergonomic shape of the EXPRESS webbing offers excellent grip when working a route. The STRING allows the carabiner to be held in position and protects the webbing from wear. Learn More
-
Round Washers: galvanized washersAs low as $0.33Used as spacers or supports under screw or bolt heads. Our washers are heat treated galvanized. Learn More
-
Rope Thimbles:As low as $12.65Rope thimbles protect the rope from wear whenever you have a fixed loop in the end of the rope, whether the rope is tied, spliced, or swaged. Learn More
-
Lag Screws: Lag BoltsAs low as $1.76Lag Screw Lag Bolt - Galvanized, Typically used for LEAP anchors, deck constuction for zip lines and ropes courses. Hot Dipped Galvanized; Hex Head Lag Screw. 5/8" x 6" lags or 5/8" x 8" lags are recommended for Leap/Lead/Bolt hanger anchors where through bolts are not required Learn More
-
CMI Micro Ropes Course Pulley$37.39Designed for rescue, it is great for portable ropes courses, ski & mountain rescue, tyrolean back ups, rescue kits, Rescue training programs, and hauling up access nets and ladders to challenge courses and climbing towers. Learn More
-
Edelrid Orion Harness$158.33A very comfortable all-round harness with 3D-Vent Technology and adjustable leg loops for sport climbing and mountaineering. Learn More
-
Edelrid Jay II Harness$79.13The Jay is the perfect all-rounder with adjustable leg loops for all types of climbing. Learn More
-
Edelrid HMS Strike Screw 5 Pack$72.27Very compact and lightweight HMS carabiner. Ideal for alpine climbing. Learn More
-
Kong Futura Hand AscenderAs low as $118.80Kong Futura Hand Ascender, It is extremely small though easy to use, weighs only 125g, and comes with two different sized handles for ergonomic customisation Learn More
-
-
CHANCE® 6449 Guy Clamp, 1/4 to 7/16 in Strand, 1/2 in Clamping Bolt, 4 in L x 1.56 in W, Steel$32.95
Learn MoreWidth: 1.56 in Strand Size: 1/4 to 7/16 in Specifications: 100 ft-lb Minimum Bolt Torque Finish: Hot Dipped Galvanized Length: 4 in Material: Steel Clamping Bolt Size: 1/2 in Suitable For Use With: Loop Type Guy Dead End Order Interval: 1 Vendor SKU: 6449 Standard & Approvals: ARRA Compliant|Buy American Act Compliant|ASTM A153 Manufacturer: Hubbell Includes: (3) Bolts Brand: CHANCE® Features & Benefits: - Parallel grooves trap strand tightly without marring
- Each bolt has a shoulder to prevent turning while tightening
-
Petzl TRAC GUIDE Zip Line Trolley$208.95Learn More
The Petzl TRAC GUIDE is a trolley designed for adventure parks. Featuring an ergonomic captive carabiner, it allows the guide to quickly install the trolley on the cable with one hand. Because the carabiner pivots, the trolley remains in position on the cable when it makes contact with the end brake of the zip line. The ends are equipped with protective impact surfaces to reduce the risk of pinched fingers, and two connector support grooves to help avoid abrasion from the cable. The JOKO and AVENTEX lanyards (sold separately) are directly integrated in the carabiner, limiting the risk of separation or loss. The carabiner’s reinforced construction provides greater resistance to damp and salty environments. Product life is extended with highly durable bearings and removable impact surfaces available as spare parts.
- Ergonomic captive carabiner allows the guide to quickly install the trolley on the cable with one hand
- Two aligned sheaves provide excellent stability on the zip line
- Because the carabiner can pivot, the trolley remains in position on the cable when it makes contact with the end brake of the zip line
- Front and rear impact surfaces limit the risk of pinched fingers
- Two positioning support grooves for the connectors limit abrasion from the cable
- JOKO or AVENTEX lanyards are directly integrated in the carabiner, limiting the risk of separating or losing the trolley/lanyard unit (Sold separately)
- Connect easily to the harness with the CARITRAC stowing accessory (included)
- Double-row ball-bearings offer optimal durability
- Carabiner with reinforced construction and hard anodization for greater resistance to damp and salty environments
- Impact surfaces optimize contact between the trolley and the end brake of the zip line
- Carabiner and impact surfaces are completely removable and available as replacement parts to extend the life of the trolley
- Also available in 5-packs
Specifications
- Cable diameter: 9 to 13 mm (may also be used on ropes)
- Material(s): Aluminum frame and carabiner, stainless steel sheave, nylon
- Maximum speed: 25 m/s
- Certification(s): CE EN 17109, CE EN 12278, UIAA
- Weight per unit: 425 g
-
Serving SleevesAs low as $2.26Serving Sleeves, These are usually in a 1x7 configuration: 1 bundle of 7 strands. Cable used in ropes courses and zip lines is usually 7x19 or 6x24: Much more flexible Learn More
-
CLICK-UP PLUS BELAY DEVICE WITH HMS$98.99
CLICK UP + is an innovative belay device with manual assisted-braking, designed for indoor and crag climbing. It can be used with 8.5-11mm single ropes. The CLICK UP + is compact and lightweight. Allows for the belayer to keep both hands on the rope while belaying or lowering the climber. The V-Proof System (patent pending) reduces the chance of error due to an incorrect handling of the rope when braking. CLICK UP + is supplied, and must be used together, with the specific HMS carabiner CONCEPT SGL HC. The wear-resistant anodizing and ACL system of the carabiners prevents the possibility of minor-axis cross-loading.
- Weight: 110 grams
- Rope diameter range: 8.5mm - 11mm
- CE and UIAA Certified EN15151-2:2012 type 2
Learn More -
Petzl Pirana Descender$51.78The PIRANA descender offers multiple braking options and can be installed on the rope without removing it from the harness. Designed for use with canyoning descent techniques. Learn More
-
2 3/4 Snap Shackle - Quick Release with no Swivel$151.75Snap shackles are hot drop forged from high resistance stainless steel. Only forging creates a superior steel product, by Increasing its elasticity and maximizing its internal strength. Learn More
-
Edelrid Mega Jul$47.45Our most versatile belay and abseil device made of solid stainless steel for durability. Learn More
-
-
Edelrid Micro Jul$47.45A compact, ultra-light belay and abseil device for half ropes and twin ropes. The only suitable device for use with the Flycatcher 6.9 mm. Learn More
-
Edelrid Cyrus Harness$145.13Probably the most comfortable harness money can buy, with 3D-Vent Technology for unparalleled wear comfort. Whether sport routes or longer alpine climbs, the Cyrus is suitable for all conditions. Learn More
-
Professional Canopy Tour Trolley: Zip Line Pulley$369.55Stainless Steel sideplates, two 2" Stainless Steel sheaves, Bearing, and Stainless Steel axle. Learn More
-
-
CMI MICROTROLLEY PULLEY$142.95The CMI Velocity Micro Zipline trolley is a fast zip line trolley that is small and light weight. Stainless steel side plates assure long life and minimal wear. Learn More
-
The CMI ZIP LINE TROLLEY$296.95Probably the most common zip line trolley in use. Super heavy duty steel sheaves and sideplates for long lasting zip line and ropes course use. 1/2" or 3/8" cable. Learn More
-
Head Rush zipSTOP Brake Trolley$262.68The Head Rush Brake Trolley is a replacement for the brake trolley that came with your Head Rush zipSTOP Zip Line Brake. Please ensure that you select the correct size for your zip line cable. Learn More
-
Bungee Cord Shock CordAs low as $27.50Nylon Shock Cord consists of a stranded rubber core covered with braided fiber resulting in an elastic cord with consistent stretch and strength. The durable "bungee type" cord is covered with nylon. Learn More
-
Robertson Zip Tour Trolley - Professional Zip Line TrolleyAs low as $330.00A practical zip line tour trolley for professional zip line tours and canopy tours. The ultra-long design provides superior stability and travel on any zip line at any speed. Learn More
-
Cable Clamps: Drop Forged Cable ClampsAs low as $1.93Great for ropes courses, zip line, high elements, and low ropes challenge courses. Cable Clamps, sometimes called cable stops or cable clips, are tools that are used to clamp down on wire rope commonly used in industrial applications as well as in zip lining and ropes course construction. Learn More
-
CHAIN PULLERS - LEVER HOISTS - 5' lIFTAs low as $204.00
HIT Lever hoists have a rugged contruction and a cover to protect the gear case and the brake equipment. The drop forged and heat treated alloy hooks are equipped with safety latches to ensure safety at all times. The steel handle rotates 360 degrees for operation in any posistion. The chain is made from high quality alloy steel and has been specially heat treated for high breaking stress and durability. This hoist has been tested 1.5 times its rated capacity.
- Designed for construction and industrial lifting and pulling applications.
- Rugged steel body construction, lightweight, compact and portable.
- Powder coat painted to protect against rust and corrosion.
- High Tensile alloy steel chain is heat treated for safety and low-wear.
- Shock resistant gear case and brake cover.
