Search results for: 'small good tool'

Removable climbing holds have been machined not to overlap the baseplate. Building this product is a complicated process using climbing holds intentionally designed for the baseplate and key. We recommend you purchase this fully assembled version. 

If a climbing hold overlaps the baseplate, it will not meet commercial playground standards. Other products in the industry have their climbing holds overlapping the baseplate. 

Once the base plate is attached to your wall, no tools are required to remove and reinstall the hold assembly. A removable climbing hold is ideal when your wall is not in use and you must prevent access to meet ACCT/CPSI standards. 

 

To install, screw the baseplate to the wall, insert the key/climbing hold into the top of the slot and slide the climbing hold down to the bottom of the bracket. 

 

• Plate dimensions are 4-3/4" at the widest x 6-1/2" tall.
• One rock climbing hold and bracket assembly included. 
• This product comes fully assembled and includes attachment screws.
• Insert into the slot and slide down to lock in place.
• Slide up and lift out of the slot for easy removal.
• Ten different designs, which are all jugs. 
• Large base plate to accommodate large holds and meet ASTM, ACCT, CPSI, and CSA standards.

Learn More

An auto belay is an automatic belay device that eliminates the need for a human belayer. In the case of the Head Rush TRUBLUE Auto Belay, it uses Head Rush's patented self-regulating braking system, which is enabled by non-contacting magnetic braking technology. Learn More

Crosby Fist Grip Cable Clamps Learn More

Get the best selection and best quality of Cargo Climbing and Ropes Course Nets. Our nets and ladder are constructed of high quality materials and even higher quality workmanship. Learn More

The Singing rock V safety zip line lanyard designed to keep you connected to your protection at all times. “V” design allows you to stay connected while passing protection points. Learn More

Stainless Steel sideplates, two 2" Stainless Steel sheaves, Bearing, and Stainless Steel axle. Learn More

A very popular tactical spec carabiner that meets your requirement for a stealthy carabiner with a minimum weight and size. The nut locks on gate to prevent jamming. Learn More

Robertson and Adventure Rope Gear introduces the Total Transfer PT harness system, a combined transfer and therapy harness system that offers patients a new way to sit, stand, and walk without complex therapy harness transfer setups Learn More

Robertson and Adventure Gear introduces the Total Transfer PT harness system, a combined transfer and therapy harness system that offers patients a new way to sit, stand, and walk without complex therapy harness transfer setups Learn More

The Zorber Shock absorbing unit is compact and lightweight. When a 220 pound weight is dropped six feet, the maximum arresting force will be less than 900 pounds. Learn More

The RC-800 Wire Rope Cutters are used for cutting 1/16 to 5/8 inch cable. Learn More

A practical zip line tour trolley for professional zip line tours and canopy tours. The ultra-long design provides superior stability and travel on any zip line at any speed. Learn More

STARGATE SRD -Shear Reduction Device, The 4" aluminum sheave is hard anodized and pared from any excess weight, while the stainless frame surrounds the sheave with minimal surface contact Learn More

Petzl Vertex Vent Helmet, With its strong chin strap, the VERTEX VENT helmet sets the standard in head protection for workers at height. Ventilation holes with adjustable sliding shutters allow air to circulate in the helmet when needed Learn More

Petzl Vertex Best Helmet A10B, Its unventilated shell ensures protection against electrical risks and molten metal splash. Its six-point mesh headband ensures comfort, and its CenterFit adjustment system adjusts the headband and keeps it centered on the head Learn More

Serving Sleeves, These are usually in a 1x7 configuration: 1 bundle of 7 strands. Cable used in ropes courses and zip lines is usually 7x19 or 6x24: Much more flexible Learn More

This manual rescue belay can be used as a self belay or with a belayer. The side plates and drum are made from heat treated 6061 T6 Aluminum while the two stainless steel pins keep the rope seperated as it is reaved around the drum. Drum is Aircraft Hard Anodized for extended wear which cost more but makes for a superior product. Learn More

Robertson Zipline Pick Off Strap works well for positioning the victim for a lowering off a zipline or rappel-based pick off or for an assisted rappel. We added a loop to the end for a more positive grip when pulling to adjust Learn More

Trapeze bar designed for use on ropes challenge courses: leap of faith. Our Trapeze Bar is made from 1-1/2" solid high density PVC. Learn More

Voltige Chest Harness will also increase your "hang" comfort and keep your body in an upright position in case of a fall. Must use with a Sit Harness. Learn More

Torse Shoulder Strap, The TORSE shoulder strap allows the CROLL ventral rope clamp to remain correctly positioned in order to optimize efficiency and comfort during rope ascents. Learn More

William Carabiner, Available with manual locking system (SCREW-LOCK) or automatic locking system (BALL-LOCK, TRIACT-LOCK). Learn More

The Petzl Vrillee hanger is for direct aid. It holds the carabiner parallel to the rock face allowing the rope to run easily through the carabiner. With 8mm bolt Learn More

Yates Gym Harness, "New" Light weight "Cam Lock" quick adjust leg and waist buckle option allows the Gym Harness to be easily adjusted with added security. Learn More

Yates Figure Eight Chest Harness, Great for use on zip line operations. Attachment points at waist and between shoulders. Safety attachment at rear of waist. Padded waist belt. Super easy to get on and adjust. Learn More

Yates Double Locking Ladder Hooks, self locking, drop forged - alloy steel. Learn More

Yates Big Wall Ladder, Big Wall Ladders offer the simplicity of traditional 1" Etriers with the comfort of 2" Wall Etries. Built in spreader bar insures that steps remain open without causing foot pinching. Learn More

Yates Speed Wall Ladders are designed with the same configuration as the Big Wall Ladders but have 1" wide steps to reduce bulk and weight. Learn More

Yates Adjustable Daisy Strap, The buckle axle is riveted for added security and strength. Contoured webbing eye at carabiner clip attachment end. This configuration allows the strap more rotation, thus reducing jamming in corners. Learn More

Yates Adjustable Daisy Strap W/ Screamer, Designed to reduce shock loading during aid climbing situations where protection fails result in a direct fall onto the lower daisy. Learn More

Yates Nylon & Dyneema Daisy Chains, Classic designed daisy chain made of 11/16" Nylon Super Tape or 12 & 14 mm Dymeema webbing. Learn More

Shoulder Eye Screw Lag, Use for connecting hand lines, spiders webs to trees, etc. on challenge courses. Do not use in life support applications. Also used when wrapping cable around a tree. Learn More

Thimbleye® bolts are forged in two styles, straight and bent at a 45° angle. The broad radius of the eye provides an excellent attachment point to dead-end or guy messenger wire, guy strand or formed wire grips. Learn More

The Rope Ladder provides moderately challenging access to high elements or an alternative to staple climbs. Constructed of double lashed hardwood dowels with waxed nylon cord to increase durability. Professional installation required.

 

Cost is by: LINEAR FOOT 

Learn More

Petzl ZigZag Prusik The linked rings provide precision and fluidity when moving around. The pulley is mounted on ball bearings to allow the slack to be taken up easily. Learn More

The Zip Line Tether was built to connect our Full Body harness to the Zip Line pulley Learn More