Stainless steel sideplates, 3"aluminum sheave, bushing, and stainless steel axle. 

 

MBS	Rope Capacity	Size	Weight	Efficiency
16000lbs	5/8"	6.5x4.25in	1.35lb	92.1%

Learn More

Stainless steel sideplates, 2" aluminum sheave, needle bearing, and stainless steel axle.

 

MBS	Rope Capacity	Size	Weight	Efficiency
8000lbs	1/2"	5x2.5in	0.5lb	90.6%

Learn More

Fully adjustable full body harness intended for rope courses and adventure parks.

• CE 1019, EN12277, EN161
• front attachment point for belaying and rappeling according to EN 12277 type C
• waist belt and the leg loops without the padding enables to put the harness to every person
• rear steel D-ring with a bearing capacity of 15 kN according EN 361
• waist belt, shoulder straps and the leg loops are easily adjustable with easy lock buckles
• red webbing strap stitched into the buckles simplify handling with them
• all steel components are finished with E-coating technology for higher corrosion resistance
• left leg loop with red color helps to put the harness on
• waist belt webbing is in red as well for easier orientation in the harness
• dorsal plastic plate with different color according the size of the harness (S – yellow, UNI – red)
• construction ensures long-time operation and efficiency (easy releasing and fastening even when dirty and tough webbing)
• Rear dorsal plate for easy size identification. Yellow = Small. Red = Universal Sizing
• Weight: 1050g
• Size: S (110-150cm/43.3in -59in)/UNI (150cm-200cm/59in-79in)

Learn More

Black anodized aluminum sideplates, 2 3/8" zinc coated steel sheave, bushing, and stainless steel axle. 

MBS	Cable/Rope Capacity	Size	Weight	Efficiency
6000lbs	5/8"	4.375x3.5in	0.75lb	91.4%

 

Learn More

Width:	1.56 in
Strand Size:	1/4 to 7/16 in
Specifications:	100 ft-lb Minimum Bolt Torque
Finish:	Hot Dipped Galvanized
Length:	4 in
Material:	Steel
Clamping Bolt Size:	1/2 in
Suitable For Use With:	Loop Type Guy Dead End
Order Interval:	1
Vendor SKU:	6449
Standard & Approvals:	ARRA Compliant|Buy American Act Compliant|ASTM A153
Manufacturer:	Hubbell
Includes:	(3) Bolts
Brand:	CHANCE®
Features & Benefits:	Parallel grooves trap strand tightly without marring Each bolt has a shoulder to prevent turning while tightening

Learn More

Stainless steel sideplates, 3" red anodized aluminum sheave, bushing, and stainless steel axle. 

*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition. 

 

MBS	Rope Capacity	Size	Weight	Efficiency
16000lbs	1/2"	6.75x5.25in	1.65lb	91.7%

 

 

 

Learn More

Red/Black anodized aluminum sideplates, two 3" aluminum sheaves, bushing, and stainless steel axle. 

 *Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition.  *Not Certified*

 

MBS	Rope Capacity	Size	Weight	Efficiency
12000lbs	1/2"	10x4in	2.6lb	184%

Learn More

A great harness for group users such as clubs, schools and camps. A great value in a fully adjustable harness. Easily adjustable harness with a single tie in point.

• Weight: 400 grams
• Number of buckles: 3
• Gear loops: 0
• Single reinforced tie in
• Universal size fits up to 47" waist.
• CE and UIAA Certified

Learn More

Learn More

An auto belay is an automatic belay device that eliminates the need for a human belayer. In the case of the Head Rush TRUBLUE Auto Belay, it uses Head Rush's patented self-regulating braking system, which is enabled by non-contacting magnetic braking technology. Learn More

If the nozzle on your TRUBLUE Auto Belay, zipSTOP Zip Line Brake or QUICKjump Free Fall Device shows signs of wear, you must replace it immediately. Nozzle Clip not included. Learn More

 Rescue Swivel helps to eliminate twisting in critical lines due to load rotation. Its 9000lb (40kN) MBS gives you piece of mind when moving the heaviest of loads, and its sealed ball bearing will keep it operating smoothly for years.

*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition.  *Not Certified*

Size: 4 1/4" x 1 3/4"
Weight: 5.6 oz
Breaking Strength: 9,000 pounds

Learn More

An ultra-light, In-Mold helmet with a robust webbing closure system. The lightweight design and excellent ventilation make it suitable for both sport climbing and mountaineering. Learn More

Aspir Adjustable Harness, Its low bulk and large range of adjustability also make it great for mountaineering and glacier travel. A great harness too for via ferrata and adventure parks. Learn More

Because small children do not have well-defined hips for a waist belt to latch onto, the full body design is necessary for safety on any zipline/ropes course. Learn More

With a maximum weight of 165 g, the SIROCCO helmet sets a new standard for lightness. The one-piece construction minimizes helmet weight while retaining excellent impact resistance, due to the mechanical properties of expanded polypropylene (EPP). Learn More

Our Machine Bolts are hot dip galvanized, forged steel, quenched and tempered and are sold with hex nuts attached. Round or square washers and lock washers can be added separately. Learn More

Nail Chipper Tri-Cut Auger Bits, Typically when drilling a hole for a through bolt as used in ropes course or zip line construction, you will need to drill a hole 1/16" bigger than the bolt you are using. 5/8" bolt requires a 11/16" hole. These are all 18" long bits. 7-1/2" are available by request. Learn More

When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More

Carriage Bolt w/Nut & Washer, The square neck under the round head will seat into the hole in the wood to prevent the head from turning. Because they are used with wood, carriage bolts are rarely high strength and virtually always supplied in a standard ASTM A307 specification. Learn More

These lightweight belay/rappel gloves combine the durability of a work glove with the precise fit and dexterity of a thinner glove. Double-layered leather protects the palm and other high-wear areas. Learn More

These medium weight belay/rappel gloves offer extra protection without sacrificing dexterity. Double-layer leather and padding protect the palm from heat generated during long rappels or lowers. Learn More

Zip Line Super Swaged Compacted Cable / Wire Rope - Zip Line Super cable aka Swaged galvanized cable or compacted wire rope is now available! This incredible cable has at least five times the life of ordinary cable, 25% more strength, 10% faster, and runs 50-70% quieter than traditional cable! This is the wire rope to use for a smoth zipline ride.

Learn More

CMI Trolley Brake Block, The striking surface is crafted from ultra-high molecular weight polyethylene, noted for it's exceptional wear resistance. Steel hardware and a galvanized eye bolt round out the package Learn More

Comfortable alpine harness with adjustable leg loops and laminated harness construction. Learn More

CMI Ultrabrake, Designed for hard use and maximum UV resistance, the material has a low friction coefficient and is self-lubricating with a non-adherent surface. Learn More

The smallest and strongest knot passing pulley on the market today! With an incredible MBS of 15,000 lbs and high strength stainless steel, our knot passing pulley puts the others to shame. Learn More

The CORAX is the versatile harness par excellence: easy to use and comfortable, it is designed for rock climbing, mountaineering or via ferrata. Learn More

The Kask Super Plasma Rescue Helmets have been specifically designed for professional rescue and work-at-height applications. Learn More

Fist Grip Cable Clamp - Import Learn More

The Kask Super Plasma Hi-Vix Helmets have been specifically designed for professional rescue and work-at-height applications. Learn More

CMI EXPEDITION ASCENDER, The Expedition Ascender is a perfect choice for big wall or mountaineering endeavors. Engineered for comfort, the handle opening is extra wide to accommodate gloved hands. Works with 7mm-12mm ropes. Sold individually. Learn More

Serving Sleeves, These are usually in a 1x7 configuration: 1 bundle of 7 strands. Cable used in ropes courses and zip lines is usually 7x19 or 6x24: Much more flexible Learn More

Anodized aluminum sideplates, 2 3/4" aluminum sheave, ball bearing and stainless steel axle. Learn More

Stainless steel sideplates, 3" aluminum hard coated sheave, bushing, and stainless steel axle. Learn More

Durable and very versatile, the BOREO helmet is suitable for climbing, mountaineering, caving, via ferrata, canyoning... Thanks to its hybrid construction, the helmet is both compact and head-covering. Learn More