Back to Top
Search results for: 'carabiner steel locking d 16,186 lbs and 1 1'
- Did you mean
- carabiner stapl locking d 16,186 lbs and 1 1
- carabiner sleev locking d 16,186 lbs and 1 1
-
CMI SHRB$145.20Stainless steel sideplates, 3" aluminum hard coated sheave, bushing, and stainless steel axle. Learn More -
Mio Cable Grab for 3/8" Wire Rope$235.40
atented cable grabs are designed to provide fall protection for workers ascending or descending from a variety of ladders or vertical structures. The stainless steel cable grab is easily removed or repositioned along a cable. If a fall occurs, the cable grab is designed to immediately lock onto the cable and prevent a free fall. Sold with an integrated shock absorber. Users should be familiar with all warnings and instructions and receive training in the proper use of this device. Product Specs: Universal design Auto traveling operation Durable, lightweight stainless steel design Meets applicable OSHA Standards and ANSI requirements. Recommended lifelines 3/8″ diameter stainless steel or galvanized 7×19 aircraft cable (non-lubed) with minimum tensile strength of 8,000 lbs.
MUST be attached to worker’s harness using ANSI rated autolocking carabiner (NOT included)
Learn More -
Petzl Kit Corax$131.93Climbing kit containing CORAX harness, belay system with Am'D carabiner and VERSO belay-rappel device, BANDI chalkbag and POWER BALL chalkball Learn More
-
PETZL FREINO$65.93It provides increased friction for single ropes when rappelling or lowering, without extra gear or the need to open the carabiner Learn More
-
CMI EXPEDITION ASCENDERAs low as $118.76CMI EXPEDITION ASCENDER, The Expedition Ascender is a perfect choice for big wall or mountaineering endeavors. Engineered for comfort, the handle opening is extra wide to accommodate gloved hands. Works with 7mm-12mm ropes. Sold individually. Learn More
-
Para-Cord / P-Cord Rainbow - 3000' Spool$240.90
This rainbow para cord is ideal for lazy lines (or haul lines) on ropes courses and climbing walls, as well as general use. Kernmantle construction for high strength and low stretch. 350 lb strength rating. 1/8" (3mm). Made in the Mexico.
Learn More -
Mini Rack Rappelling Descender$74.80The handy alternative for shorter drops or lighter loads. To reduce weight, the rack is drawn from 5/16" stainless steel, and the solid bars are formed from anodized aluminum. Learn More
-
Canopy Tour Trolley: Zip Line Pulley$220.00Stainless Steel sideplates, two 2" Stainless Steel sheaves, Bearing, and Stainless Steel axle. Learn More
-
CMI MICROTROLLEY PULLEY$142.95The CMI Velocity Micro Zipline trolley is a fast zip line trolley that is small and light weight. Stainless steel side plates assure long life and minimal wear. Learn More
-
TECHNIC - ANSI FULLBODY HARNESS$197.95
A fully adjustable, full body harness for work positioning and fall-arrest. Padded hip belt and leg loops for comfort. Available in Easy Lock buckle or Speed Lock buckles. NFPA version includes Speed Lock buckles and all steel components and attachment points.
Learn More- Independently adjustable leg loops and shoulder straps
- Front and rear (dorsal) attachment point for descender placement or work positioning (EN813)
-
Lateral attachment points in accordance with EN 358
- Steel D-rings are movable into "parking position" avoiding being caught-up while in use
- Easy-Lock buckles enable fluent and fast adjustment to fit to users body
-
Slots designed to secure hanging equipment
- Identification and methodical label
- Chest attachment point according to EN 361
- D-ring, flat and padded dorsal attachment point according to EN 361
- Weight: 1620 grams / 57 oz
-
CE 1019, EN 358, EN 813, EN 361
-
Wire Rope - Zipline Cable Copper Ferrule -3/8"$5.50Ferrules must be properly crimped to achieve holding strength. Properly swaged ferrules can hold 90% of cable strength. Two ferrules are required for life support and ziplining applications (ACCT Standards). Learn More
-
Edelrid HMS Strike Slider 5 Pack$131.93Innovative HMS carabiner with automatic locking mechanism. Learn More
-
Robertson SR71 Hammer Zip Line Trolley$227.04Using machined axles which may cost more but give the SR-71 Hammer zip line trolley unparalleled structural integrity. Learn More
-
Professional Canopy Tour Trolley: Zip Line Pulley$369.55Stainless Steel sideplates, two 2" Stainless Steel sheaves, Bearing, and Stainless Steel axle. Learn More
-
Petzl I'D Belay Device DescenderAs low as $351.95The Petzl ID is a self-braking descender with an anti-panic function built in. Learn More
-
Singing Rock Technic Full Body Harness$194.65Learn More
A fully adjustable, full body harness for work positioning and fall-arrest. Padded hip belt and leg loops for comfort. Available in Easy Lock buckle or Speed Lock buckles. NFPA version includes Speed Lock buckles and all steel components and attachment points.
- Independently adjustable leg loops and shoulder straps
- Front and rear (dorsal) attachment point for descender placement or work positioning (EN813)
-
Lateral attachment points in accordance with EN 358
- Aluminum D-rings are movable into "parking position" avoiding being caught-up while in use
- Easy-Lock buckles enable fluent and fast adjustment to fit to users body
-
Slots designed to secure hanging equipment
- Identification and methodical label
- Chest attachment point according to EN 361
- D-ring, flat and padded dorsal attachment point according to EN 361
- Weight: 1620 grams / 57 oz
-
CE 1019, EN 358, EN 813, EN 361
-
Rope ID Markers$42.90Write, type, or stamp information on the ¾ x 1 inch white area. Clear self-laminating portion wraps around to protect writing. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Eye 3/4" x 12"$29.70Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Hook-Hook 3/4" x 12"$29.70Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Hook 3/4" x 12"$29.70Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Jaw 3/4" x 12"$29.70Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Jaw 3/4" x 12"$29.70Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Hook 3/4" x 12"$29.70Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Eye 5/8" x 6"$16.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Hook-Hook 5/8" x 6"$16.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Hook 5/8" x 6"$16.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Jaw 5/8" x 6"$16.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Jaw 5/8" x 6"$16.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Hook 5/8" x 6"$16.50Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Eye 5/8" x 12"$20.35Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Hook-Hook 5/8" x 12"$20.35Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Hook 5/8" x 12"$20.35Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Jaw 5/8" x 12"$20.35Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Eye-Jaw 5/8" x 12"$20.35Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
-
Turnbuckles: Cable Zip Line Turnbuckle : Jaw-Hook 5/8" x 12"$20.35Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More
