Search results for: 'cmi cable pull'

The handy alternative for shorter drops or lighter loads. To reduce weight, the rack is drawn from 5/16" stainless steel, and the solid bars are formed from anodized aluminum. Learn More

Our HyperBars, a solid anodized aluminum bar with a single lock-off pin, allow for easier and safer lock offs. The HyperRack includes a single HyperBar. Learn More

The handy alternative for shorter drops or lighter loads. To reduce weight, the rack is drawn from 5/16" stainless steel, and the solid bars are formed from anodized aluminum. Learn More

Learn More

The Petzl ID is a self-braking descender with an anti-panic function built in. Learn More

The Y Tail - Participant Ropes Course Lanyard is manufactured from 1/2" high quality US manufactured PolyDacron 3-strand rope. The lanyard has a loop for girth hitch attachment to the harness and two ANSI rated double-locking snap hooks for connection to the lifeline (belay cable). Lanyards are adjustable from 4' (48") to 6'5" (77").

Learn More

This manual rescue belay can be used as a self belay or with a belayer. The side plates and drum are made from heat treated 6061 T6 Aluminum while the two stainless steel pins keep the rope seperated as it is reaved around the drum. Drum is Aircraft Hard Anodized for extended wear which cost more but makes for a superior product. Learn More

HIT Lever hoists have a rugged contruction and a cover to protect the gear case and the brake equipment. The drop forged and heat treated alloy hooks are equipped with safety latches to ensure safety at all times. The steel handle rotates 360 degrees for operation in any posistion. The chain is made from high quality alloy steel and has been specially heat treated for high breaking stress and durability. This hoist has been tested 1.5 times its rated capacity.

• Designed for construction and industrial lifting and pulling applications.
• Rugged steel body construction, lightweight, compact and portable.
• Powder coat painted to protect against rust and corrosion.
• High Tensile alloy steel chain is heat treated for safety and low-wear.
• Shock resistant gear case and brake cover.

Learn More

The classic high ropes harness. Fully-adjustable webbing harness that covers all sizes thanks to its six Easy-Glider buckles. Learn More

Easy-to-operate semi-automatic belay device with assisted braking and maximum safety for sport and indoor climbing. Learn More

Rock Exotica Swivel Ropes Course Zip Line Carabiners , The SwivaBiner features a high-strength bushing that will withstand greater abuse than a bearing. The SwivaBiner is designed to re-orient a load, and not provide high-speed rotation. Learn More

This is a simplified version of the PANDION without a equipment loop for climbing rental programs, zipline programs etc. Learn More

Aspir Adjustable Harness, Its low bulk and large range of adjustability also make it great for mountaineering and glacier travel. A great harness too for via ferrata and adventure parks. Learn More

Petzl Pandion Harness, Adjustable leg loops allow size to be adjusted depending on comfort desired or layers of clothing worn and permit the harness to be put on when wearing skis or crampons Learn More

The Felco C112 Cutter features maximum force transmission which applies the maximum leverage at just the right moment. This coupled with Swiss precision blades make this cutter very easy to use. Learn More

Nail Chipper Tri-Cut Auger Bits, Typically when drilling a hole for a through bolt as used in ropes course or zip line construction, you will need to drill a hole 1/16" bigger than the bolt you are using. 5/8" bolt requires a 11/16" hole. These are all 18" long bits. 7-1/2" are available by request. Learn More

The KAA is a self contained mechanical advantage system for tensioning lines or lifting people during rescues. In addition, as the KAA is certified to EN 354, it can be used for workplace stabilization, as a restraint system (open/closed), and for controlled lowering. Its strap-based construction makes it the most compact and lightweight system on the market. Depending on the orientation, it offers a 4:1 or 5:1 lifting ratio with an efficiency of 91%. The KAA is packaged compactly and ready for immediate use, so that no valuable time is lost when it is required. A swivel is provided at each end to prevent the system from twisting. The hand lever on the draw cord makes it easier to pull and can also be used as a lowering lever.

 

Weight: 500g (1.1lbs)

MBS: 22kN

Certification: EN 354

Efficiency: 91%

• Compact and lightweight due to strap-based construction
• 4:1 or 5:1 mechanical advantage
• Can be set up in seconds
• Swivels on both ends

Learn More

Used as spacers or supports under screw or bolt heads. Our washers are heat treated galvanized. Learn More

Lock washers are a critical component to through bolts on wood poles. Pole shrinkage mandates the use of double coil lock washers to keep pressure on the nut and bolt to prevent loosening. Learn More

Square Curved Washers for nut eye bolts and machine bolts. Galvanized Square washers designed for outdoor use in challenge courses, zip lines and other outdoor applications. Learn More

The Zip Line Evo pulley system is the latest in new ropes course and zip line tailored equipment by Kong. The evolution of our first pulley with integrated connector, that avoids every possibility of mistake. Learn More

The Impact Trolley is the only trolley on the market engineered specifically for smooth and consistent impact braking with the zipSTOP Zip Line Brake system. Learn More

We offer three different style of pilot auger bits for 1/2" lags for ropes course decks, zip line decks and general deck construction for 1/2" & 5/8" lag bolts Learn More

Stainless Steel Thimbles, When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More

Unlike the competition it is assembled using machined axles which may cost more but give the SR-71 zip trolley unparalleled structural integrity. Learn More

Thimbleye® bolts are forged in two styles, straight and bent at a 45° angle. The broad radius of the eye provides an excellent attachment point to dead-end or guy messenger wire, guy strand or formed wire grips. Learn More

The VERTIGO WIRE-LOCK carabiner is designed for use on via ferrata lanyards along with zipline systems and ropes courses. Learn More

This innovative, all-in-one Pulley/Auto belay for fall protection is lightweight and easy to use. Auto belay pulley Locks in either direction (right or left) while climbing up or down. Learn More

Using machined axles which may cost more but give the SR-71 Hammer zip line trolley unparalleled structural integrity. Learn More

TRAC PLUS Zip Line Trolley, They cannot be dropped, thanks to the VERTIGO WIRE-LOCK carabiner, simplifying their functionality Learn More

Certified according to EN 17109 (class D)! The Smart Belay X is a redesign of our legendary Smart Belay - now with innovative magnetic technology for continuous safety and maximum freedom of movement in your high ropes course. Certified according to EN 17109 (class D).

 

• Quick registration and effective management thanks to RFID technology
• communicating, interconnected pulley carabiners prevent accidental detachment from the safety cable
• safety lock with magnet technology for maximum security and protection against careless use
• intuitive operation even for children
• steel pulleys integrated in the carabiner for use on zip lines replace the double pulley
• PILOT BAR minimizes the risk of strangulation and provides support for difficult elements in the course
• modular system allows the use of different connectors and different lengths of tie-in loops
• quick and easy evacuation made possible by opener or steel carabiner (not included in delivery)
• SBX HOLSTER included

Learn More

The Head Rush Lightspeed EZ Clip Zip Line Trolley’s split-second, one-handed installation (just press the trigger against the zip line) will make your guides happy and increase throughput. Learn More

The Head Rush Brake Trolley is a replacement for the brake trolley that came with your zipSTOP Zip Line Brake. Learn More

The Zippey Trolley is bi-directional, so there’s no wrong way to fit it. Zippey offers a one handed action with either a single or double locking mechanism for increased safety.

Zippey has a speed rating of 60mph (90kph), which is based on the use of the same high spec deep groove, double row ball bearings, as used in our Zipspeed range. The expected life of the bearings should be more than 1000 miles (1500km).

Accessories available for the Zippey Trolleys

ARC – Anti Roll Back Cam. This innovative add on solves many of the issues associated with modern zip lines. Riders who reach the egress platform can roll back out onto the line requiring staff intervention. The ARC ensures that the rider remains in position over the egress platform by camming against the zip line cable maintaining their position.

Handle Accessory – There is now an available handle accessory for the Zippey making it possible for riders to ‘steer’ into the arrival station.

Learn More

These lobster Claws are a unique, non-adjustable set of positioning / safety lanyards designed specifically for program high ropes courses. Learn More

Ready-to-use reversible rescue kit designed to easily pick off and lower a victim. Learn More