Search results for: 'coil size and speed'

Nail Chipper Tri-Cut Auger Bits, Typically when drilling a hole for a through bolt as used in ropes course or zip line construction, you will need to drill a hole 1/16" bigger than the bolt you are using. 5/8" bolt requires a 11/16" hole. These are all 18" long bits. 7-1/2" are available by request. Learn More

When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More

Carriage Bolt w/Nut & Washer, The square neck under the round head will seat into the hole in the wood to prevent the head from turning. Because they are used with wood, carriage bolts are rarely high strength and virtually always supplied in a standard ASTM A307 specification. Learn More

These lightweight belay/rappel gloves combine the durability of a work glove with the precise fit and dexterity of a thinner glove. Double-layered leather protects the palm and other high-wear areas. Learn More

These medium weight belay/rappel gloves offer extra protection without sacrificing dexterity. Double-layer leather and padding protect the palm from heat generated during long rappels or lowers. Learn More

The adjustable leg loops of the LUNA harness make it an ideal piece of equipment for mountaineering, ziplining, and ice climbing. Learn More

Zip Line Super Swaged Compacted Cable / Wire Rope - Zip Line Super cable aka Swaged galvanized cable or compacted wire rope is now available! This incredible cable has at least five times the life of ordinary cable, 25% more strength, 10% faster, and runs 50-70% quieter than traditional cable! This is the wire rope to use for a smoth zipline ride.

Learn More

CMI Trolley Brake Block, The striking surface is crafted from ultra-high molecular weight polyethylene, noted for it's exceptional wear resistance. Steel hardware and a galvanized eye bolt round out the package Learn More

Comfortable alpine harness with adjustable leg loops and laminated harness construction. Learn More

The SAMA harness is ideal for sport climbing and zip lining . With its EndoFrame construction, it provides excellent weight distribution around the waist and legs to ensure greater comfort. Learn More

Ferrules must be properly crimped to achieve holding strength. Properly swaged ferrules can hold 90% of cable strength. Two ferrules are required for life support and ziplining applications (ACCT Standards). Learn More

Ferrules must be properly crimped to achieve holding strength. Properly swaged ferrules can hold 90% of cable strength. Two ferrules are required for life support and ziplining applications (ACCT Standards). Learn More

Ferrules must be properly crimped to achieve holding strength. Properly swaged ferrules can hold 90% of cable strength. Two ferrules are required for life support and ziplining applications (ACCT Standards). Learn More

CMI Ultrabrake, Designed for hard use and maximum UV resistance, the material has a low friction coefficient and is self-lubricating with a non-adherent surface. Learn More

The smallest and strongest knot passing pulley on the market today! With an incredible MBS of 15,000 lbs and high strength stainless steel, our knot passing pulley puts the others to shame. Learn More

The CORAX is the versatile harness par excellence: easy to use and comfortable, it is designed for rock climbing, mountaineering or via ferrata. Learn More

Fist Grip Cable Clamp - Import Learn More

The Kask Super Plasma Rescue Helmets have been specifically designed for professional rescue and work-at-height applications. Learn More

The Kask Super Plasma Hi-Vix Helmets have been specifically designed for professional rescue and work-at-height applications. Learn More

CMI EXPEDITION ASCENDER, The Expedition Ascender is a perfect choice for big wall or mountaineering endeavors. Engineered for comfort, the handle opening is extra wide to accommodate gloved hands. Works with 7mm-12mm ropes. Sold individually. Learn More

Crosby Fist Grip Cable Clamps Learn More

Zipline Cable Ferrule - Zinc Plated, Two ferrules are required for life support and ziplining applications (ACCT Standards). The extra ferrule serves as a backup in case of primary ferrule failure due to defects or improper swaging. A 12 ton crimper/compression tool is required for 1/4" - 1/2" ferrules Learn More

Durable and very versatile, the BOREO helmet is suitable for climbing, mountaineering, caving, via ferrata, canyoning... Thanks to its hybrid construction, the helmet is both compact and head-covering. Learn More

Anodized aluminum sideplates, 2 3/4" aluminum sheave, ball bearing and stainless steel axle. Learn More

Stainless steel sideplates, 3" aluminum hard coated sheave, bushing, and stainless steel axle. Learn More

Deep Cut telephone Pole Auger Bits: 24", Super long 24" Pole Auger Bits for telephone poles, utility poles, treated poles, ropes course and zip line poles. Designed for making deep cuts in utility poles, pressure treated lumber, railroad ties, and wet or frozen lumber. Learn More

We offer three different style of pilot auger bits for 1/2" lags for ropes course decks, zip line decks and general deck construction for 1/2" & 5/8" lag bolts Learn More

Purple Anodized Aluminum sideplates, 1 1/4" Aluminum sheave, Bushing, and Stainless Steel axle. Learn More

Joko I & Y Lanyards, These are used in traditional via feratta settings as well for park staff. For participants, however, we recommend the use of an "Always On" system. Learn More

Whitewater cascades, rappelling, caving, spelunking, swimming, jumping, ziplining... this is the domain of the CANYON harness. Rugged, non-absorbent materials ensure lightweight longevity for all your aquatic adventures. Learn More

The Klein Haven Cable Grip is designed for use when a light, compact grip is desired and where zipline or other cable damage is not a factor. Gripping pressure of the knurled jaw s applied to ¼” of zipline cable area. Learn More

Innovative HMS carabiner with automatic locking mechanism. Learn More

CMI RTTROLLEY Rapid Transit ZiplineTrolley, Stainless Steel sideplates, two 2" Stainless sheaves, Bearing, and Stainless Steel axle. Taking from the popularity of their velocity zipline trolley, CMI has launched a 2" wheel version, the RT zipline Trolley. Learn More

Headwall Universal Harness, The headwall is a 'double back' harness. This style takes longer to put on but will not loosen over time as parachute buckle harnesses can do Learn More

The pack of four BOREO CLUB helmets is designed for groups and clubs. It is very versatile, and adapts to climbing, mountaineering, caving, via ferrata, and canyoning... Learn More

Fully adjustable harness for work positioning withcontinuous adjustable webbing, SPEED buckles, padded wide waist belt, anatomicleg loops and shoulder straps.

• super comfortable wide waist belt padding provides maximum comfort when working at height
• strength webbing on the waist belt is stitched in the way that at normal working situation the body weight is absorbed by the padding only
• reflective strap and printing on the waist belt and a reflective strap on the shoulder padding increase the visibility in dark working conditions (the black version of the harness is not equipped with the reflective elements)
• anatomic leg loops and waist belt are covered with strong PES fabric providing high abrasion resistance
• standard easy lock buckles enable smooth adjustment
• narrowed padding and webbing on the shoulder straps in a neck area enhance comfortable work
• leg loops connection straps made from durable PES webbing for better abrasion resistance
• front and back attachment points for fall arrest according to EN 361 marked with additional “A“ marking
• flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus
• front lower attachment point for descender placement or work positioning according to EN 813
• 2 side attachment points for work positioning according to EN 358
• 4 ergonomic braided gear loops with a bearing capacity of 5 kg
• heavier items up to 35 kg can be attached to the webbing on the waist belt
• additional loops on the waist belt and leg loops with a bearing capacity of 5 kg offer additional space for the gear and better gear organization
• wide elastic band at left shoulder strap for the gear attachment (e.g. transmitter)
• slots at the waist belt for Porter tool holder to carry your industrial tools
• shoulder attachment points for confined space rescue according to EN 1497
• chest ascender smart fixation system (using an additional maillon), works best with Cam Clean
• all steel components finished with E-coating for higher corrosion resistance
• identification and methodical label
• Weight: 177g, 62.68oz
• Max Rated Load: 150 kg
• Certifications: EN 358, EN 361, EN 813, EN 1497, CE 1019

Learn More