Back to Top
Search results for: 'your triple locking steel carabiner'
-
Head Rush TRUBLUE XL Replacement Webbing$330.00The Head Rush TRUBLUE XL Auto Belay is fitted with a webbing that can be replaced in the field by the owner using the Replacement Webbing. Learn More -
TRUBLUE Replacement Webbing$211.20The TRUBLUE Auto Belay is fitted with a webbing that can be replaced in the field by the owner using the Replacement Webbing. Learn More
-
Petzl Pro Traxion$191.33The PRO TRAXION progress capture pulley is designed to allow rope installation while the pulley is connected to the anchor. With its large diameter sheave and great efficiency, it is particularly appropriate for hauling heavy loads. Learn More
-
CMI ROPE PULLEY RP104$129.36High strength in a compact design. Stainless Steel sideplates, 2 3/8" Aluminum sheave, Bearing, and Stainless Steel axle. Learn More
-
Petzl ZigZag Prusik$369.53Petzl ZigZag Prusik The linked rings provide precision and fluidity when moving around. The pulley is mounted on ball bearings to allow the slack to be taken up easily. Learn More
-
XF FORGE BELAY DEVICE$21.99
By incorporating a rigid stem on this belay/rappel device, climbers go from full lock-off to whipping out rope in a single, smooth action. No more binding up as the device tries to free itself. The amount of friction can be easily adjusted to suit your particular need. Climbing with fat ropes, a skinny partner or on low-angle slabs? Belay with the U-Grooves and clip into the bottom hole of the XF Forge for less friction. For the ultimate control, wrap that skinny cord around the rigid stem and rappel, figure-8 style.
Learn More -
Felco C112 Wire Rope Cutter$781.00The Felco C112 Cutter features maximum force transmission which applies the maximum leverage at just the right moment. This coupled with Swiss precision blades make this cutter very easy to use. Learn More
-
Edelrid HMS Strike Screw 5 Pack$72.27Very compact and lightweight HMS carabiner. Ideal for alpine climbing. Learn More
-
2 3/4 Snap Shackle - Quick Release with no Swivel$151.75Snap shackles are hot drop forged from high resistance stainless steel. Only forging creates a superior steel product, by Increasing its elasticity and maximizing its internal strength. Learn More
-
Snap Shackle - Quick Release Snap Shackle w/Swivel$158.35Snap shackles are hot drop forged from high resistance stainless steel. Only forging creates a superior steel product, by Increasing its elasticity and maximizing its internal strength. Learn More
-
5/8 NUT EYE BOLTSAs low as $7.65Nut Eye bolts are the main bolts used in ropes challenge course and zip line construction. Zipline and other cables are terminated to the eye bolt around a thimble to prevent cable deformation at the turn back. Learn More
-
Petzl Falcon Rescue/Zipline HarnessAs low as $225.89Petzl Falcon Rescue/Zipline Harness, The two lateral attachment points transfer the weight evenly around the waistbelt for comfortable surface-supported work/ziplining Learn More
-
Petzl Corax Harness$79.13The CORAX is the versatile harness par excellence: easy to use and comfortable, it is designed for rock climbing, mountaineering or via ferrata. Learn More
-
CMI RTTROLLEY Rapid Transit ZiplineTrolley$230.95CMI RTTROLLEY Rapid Transit ZiplineTrolley, Stainless Steel sideplates, two 2" Stainless sheaves, Bearing, and Stainless Steel axle. Taking from the popularity of their velocity zipline trolley, CMI has launched a 2" wheel version, the RT zipline Trolley. Learn More
-
Petzl Swan Easy-Fit Full Body Harness$186.95
Durable, easy-to-use full-body harness for adventure parks
Learn MoreSWAN® EASYFIT STEEL is a full-body harness designed for adventure parks. Its straps are color-coded to make donning easier. It is equipped with a FAST LT PIN-LOCK buckle to secure harness fastening; the PIN-LOCK locking system can only be opened by the guide with a special tool. The raised position of the connection point limits the risk of the client flipping. Its durability makes for easy maintenance and extended product life. Its single size and identification areas simplify equipment inventory management.
Detailed description
- Very easy to use full-body harness designed for adventure parks:
- Easy to install on the client, with FAST buckles at the rear of the harness
- Right/left color coding makes it easier to give donning instructions to clients
- Self-locking DOUBLEBACK buckles for quick and easy adjustment
- Excellent grip on webbing ends facilitates adjustment, even with gloves - Protects the client during progression:
- FAST LT PIN-LOCK waistbelt buckle can only be unlocked with a special tool, limiting the risk of the participant opening the buckle
- Wide ventral attachment point is color-coded green, making it easier to install the JOKO or AVENTEX lanyards and allowing for a quick visual check; the raised position of the attachment point limits the risk of the client flipping
- Anatomical design is close-fitting yet allows optimal freedom of movement
- Two side equipment loops make it easy to carry lanyard connectors - Excellent durability for easy maintenance and extended product life:
- Durable metal attachment point
- Webbing designed for intensive use and smooth adjustment - Easy equipment management for guide or monitor:
- Single size, adapts to most body types
- Marking area on the outside of the harness for easy identification when stored
- Identification panel integrated in the harness to track the equipment throughout its lifespan
- Easy to clean - Accessories to adapt the harness according to need:
- Leg loop foam for greater comfort when hanging for long periods of time
- CARITRAC stowing accessory to easily stow TRAC trolleys - Comes with an unlocking tool for the FAST LT PIN-LOCK buckle which can be easily carried on the guide’s harness
- Available individually or in packs of five
Specifications
- Material(s): Polyester webbing, aluminum attachment point, steel buckles, nylon
- Certification(s): CE EN 12277 type A, UIAA
- Weight per unit: 1125 g
- Waist belt: <120 cm
- Leg loops: <75 cm
- Stature: <200 cm
- Very easy to use full-body harness designed for adventure parks:
-
Petzl Rescucender Ascender$118.73Simple to use and ergonomic, the RESCUCENDER is an openable cam-loaded rope clamp designed for use in haul systems as a tractor or progress capture device. Learn More
-
Beam Clamps: I-Beam ClampsAs low as $85.80They fit securely on a wide range of flange widths and beam sizes, with a built-in suspension bar that provides for close mounting. The clamp jaw design reduces flange stress by distributing the load away from the flange edge. Learn More
-
Petzl TOP Harness$145.13The TOP chest harness transforms the AVAO SIT, FALCON and SEQUOIA SRT seat harnesses into fall arrest harnesses. The foam shoulder straps are widely spaced to reduce neck chafing. Learn More
-
Rock Exotica enForcer Load Cell$1,256.64Rock Exotica enForcer Load Cell is a compact aluminum load cell that measures force up to 20 kN. Utilizing two sampling modes, the Enforcer is able to monitor systems, and log drop testing in high resolution. Learn More
-
Petzl Delta Quick Link$9.17When closed with a wrench, this steel quick link becomes a semi-permanent anchor ring. Learn More
-
CMI EXPEDITION ASCENDERAs low as $118.76CMI EXPEDITION ASCENDER, The Expedition Ascender is a perfect choice for big wall or mountaineering endeavors. Engineered for comfort, the handle opening is extra wide to accommodate gloved hands. Works with 7mm-12mm ropes. Sold individually. Learn More
-
Petzl I'D Belay Device DescenderAs low as $351.95The Petzl ID is a self-braking descender with an anti-panic function built in. Learn More
-
GriGri 2 Belay Device$109.95The GRIGRI 2 belay device with assisted braking is designed to facilitate belay maneuvers. Learn More
-
CYPHER HELIOS SCREW GATE HMS$15.39
Our largest HMS designed for easy belay setup in any situation. The frame’s round bar stock works great with a variety of belay techniques including popular semi-auto locking devices, tube devices, and Munter hitch.
- CE EN12275 Certified
- Weight: 85g
- Strength (major axis): 25kN
-
CMI MICROTROLLEY PULLEY$142.95The CMI Velocity Micro Zipline trolley is a fast zip line trolley that is small and light weight. Stainless steel side plates assure long life and minimal wear. Learn More
-
Petzl Newton Harness$237.53Fall arrest harness that is comfortable for work and easy to use. It offers ergonomic stowage of MGO connectors and has fall indicators. It is certified to North American, European and Russian standards. Learn More
-
CMI RP103BB Ropes Course Pulley$109.10Anodized aluminum sideplates, 2 3/4" aluminum sheave, ball bearing and stainless steel axle. Learn More
-
CMI RP137 Rope Pulley$72.60Purple Anodized Aluminum sideplates, 1 1/4" Aluminum sheave, Bushing, and Stainless Steel axle. Learn More
-
CMI ROPE PULLEY RP103$100.10For hostile environments and maximum service life. Blue Anodized Aluminum sideplates, 2 3/8" Aluminum sheave, Bearing, and Stainless Steel axle. Learn More
-
Removable Climbing Hold - Flush Mount -Removable Hold - With Bracket - Concrete$75.85
Removable climbing holds have been machined not to overlap the baseplate. Building this product is a complicated process using climbing holds intentionally designed for the baseplate and key. We recommend you purchase this fully assembled version.
If a climbing hold overlaps the baseplate, it will not meet commercial playground standards. Other products in the industry have their climbing holds overlapping the baseplate.
Once the base plate is attached to your wall, no tools are required to remove and reinstall the hold assembly. A removable climbing hold is ideal when your wall is not in use and you must prevent access to meet ACCT/CPSI standards.
To install, screw the baseplate to the wall, insert the key/climbing hold into the top of the slot and slide the climbing hold down to the bottom of the bracket.
- Plate dimensions are 4-3/4" at the widest x 6-1/2" tall.
- One rock climbing hold and bracket assembly included.
- This product comes fully assembled and includes attachment screws.
- Insert into the slot and slide down to lock in place.
- Slide up and lift out of the slot for easy removal.
- Ten different designs, which are all jugs.
- Large base plate to accommodate large holds and meet ASTM, ACCT, CPSI, and CSA standards.
-
Edelweiss Challenge Sit Harness$54.45
The Challenge harness is built for group-use activities like ropes courses, indoor and outdoor climbing as well as mountaineering. It is an adjustable unpadded harness with three auto locking buckles. A single visible attachment point, closing of the waist on the right side, and two different leg colors for ease and speed of use.
Learn More -
Petzl Croll Ascender$92.33Petzl Croll Ascender, The CROLL chest ascender is unmatched for efficiency on fixed lines. Compact and lightweight, it does not interfere with progression. The stainless steel wear plate improves durability by reinforcing the rope friction zone. Learn More
-
Petzl Rocher Mixte$26.33Petzl Rocher Mixte, Piton for thin, parallel-sided cracks in limestone or granite. Conforms to the shape of the crack (semi-hardened steel, not heat treated) Learn More
-
CMI Highline Knot Passing Pulley$268.35The smallest and strongest knot passing pulley on the market today! With an incredible MBS of 15,000 lbs and high strength stainless steel, our knot passing pulley puts the others to shame. Learn More
-
Y Tail - Participant Ropes Course Lanyard$62.65
The Y Tail - Participant Ropes Course Lanyard is manufactured from 1/2" high quality US manufactured PolyDacron 3-strand rope. The lanyard has a loop for girth hitch attachment to the harness and two ANSI rated double-locking snap hooks for connection to the lifeline (belay cable). Lanyards are adjustable from 4' (48") to 6'5" (77").
Learn More -
Petzl Stop Descender Device$186.95Originally designed for single rope descents in caving, the Stop has become a standard tool for the rope access worker. The Stop is designed to automatically "stop" the descent when the red handle is not depressed. Learn More
