Search results for: 'adjustable lobster claw with steel steel holds'
- Did you mean
- adjustable lobster claw with sterl sterl holds
- adjustable lobster clamp with sleev stapl holds
-
Beam Clamps: I-Beam ClampsAs low as $85.80They fit securely on a wide range of flange widths and beam sizes, with a built-in suspension bar that provides for close mounting. The clamp jaw design reduces flange stress by distributing the load away from the flange edge. Learn More
-
Petzl Panga 5 Pack Helmets$354.13PANGA is a single-size helmet, durable and easy to use, designed for group and club use. Its FLIP&FIT system allows the headband size to be easily adjusted by an operator, or by the user. This system also offers protection for the headband during storage and transport. Learn More
-
RC 102 Cable Able Pulley$91.85
Black anodized aluminum sideplates, 2 3/8" zinc coated steel sheave, bushing, and stainless steel axle.
MBS
Cable/Rope Capacity
Size
Weight
Efficiency
6000lbs
5/8"
4.375x3.5in
0.75lb
91.4%
-
CMI Twin Expedition Arborist Ascender$226.55CMI Twin Expedition Arborist Ascender, The Twin Expedition is the first single-handled dual ascender designed to meet the needs of industry leading arborist professionals. The EXPTWIN easily accommodates three rope techniques - 2:1 doubled rope technique (DdRT), 1:1 single rope technique (SRT), and 1:1 twin line ascent (DbRT). Learn More
-
RESCUE FIGURE 8$49.49
The Rescue Figure 8 is a special figure 8 for rescue situations and fast rappeling. It has a special shap for multiple rope locking, allows rappeling with heavy loads, has a high strength, and fits a wide range of rope diameters. Available in light alloy or stainlees steel.
- Weight: 154g, 5.43oz (alloy) 451g, 15.9 oz (stainless steel)
- Material: Light alloy or stainless steel
- Strength: 40kN
-
Petzl TOP Harness$145.13The TOP chest harness transforms the AVAO SIT, FALCON and SEQUOIA SRT seat harnesses into fall arrest harnesses. The foam shoulder straps are widely spaced to reduce neck chafing. Learn More
-
Wire Rope - Zipline Cable Ferrule - Zinc PlatedAs low as $2.48Zipline Cable Ferrule - Zinc Plated, Two ferrules are required for life support and ziplining applications (ACCT Standards). The extra ferrule serves as a backup in case of primary ferrule failure due to defects or improper swaging. A 12 ton crimper/compression tool is required for 1/4" - 1/2" ferrules Learn More
-
RP 129 NFPA rescue Pulley$172.15
Stainless steel sideplates, 3" red anodized aluminum sheave, bushing, and stainless steel axle.
*Exceeds tests for national fire protection association standard on fire service life safety rope and system components NFPA 1983-2006 edition.
MBS
Rope Capacity
Size
Weight
Efficiency
16000lbs
1/2"
6.75x5.25in
1.65lb
91.7%
-
Petzl Pantin Ascender$105.53Petzl Pantin Ascender, A big advantage for long rope ascents. With the Pantin Ascender supporting the foot, the body is held in a more upright position thus making the ascent faster and less tiring for the arms. Learn More
-
Petzl Falcon Rescue/Zipline HarnessAs low as $225.89Petzl Falcon Rescue/Zipline Harness, The two lateral attachment points transfer the weight evenly around the waistbelt for comfortable surface-supported work/ziplining Learn More
-
CHAIN PULLERS - LEVER HOISTS - 5' lIFTAs low as $204.00
HIT Lever hoists have a rugged contruction and a cover to protect the gear case and the brake equipment. The drop forged and heat treated alloy hooks are equipped with safety latches to ensure safety at all times. The steel handle rotates 360 degrees for operation in any posistion. The chain is made from high quality alloy steel and has been specially heat treated for high breaking stress and durability. This hoist has been tested 1.5 times its rated capacity.
- Designed for construction and industrial lifting and pulling applications.
- Rugged steel body construction, lightweight, compact and portable.
- Powder coat painted to protect against rust and corrosion.
- High Tensile alloy steel chain is heat treated for safety and low-wear.
- Shock resistant gear case and brake cover.
-
Edelrid Mega Jul Belay Kit$85.73The Mega Jul Belay Kit with our Mega Jul belay device and the HMS Strike FG Carabiner. Learn More
-
Petzl SPELEGYCA$49.45Asymmetrical Y-shaped sewn lanyard made of flat webbing, * Used with an ASCENSION handled rope clamp for progression on a rope, * Asymmetrical Y-shape for ease of movement: Learn More
-
CMI Double Expedition Ascender$189.15CMI Double Expedition Ascender, The cam is the same design as those in our now famous Ultrascenders and carries the same lifetime wear-out guarantee. Extra large handgrip opening easily accomodates gloved or mittened hands Learn More
-
Petzl Newton Harness$237.53Fall arrest harness that is comfortable for work and easy to use. It offers ergonomic stowage of MGO connectors and has fall indicators. It is certified to North American, European and Russian standards. Learn More
-
BEAL BIRDIE SEMI-AUTO BELAY DEVICE$98.99
Compact belay device with assisted braking for lead climbing or top rope. All metal construction with cam and friction components in stainless steel for great durability. The rope exits following the device’s axis to avoid twisting. The BIRDIE can be used with all dynamic single ropes from 8.5mm to 11mm.
- All steel construction
- Compatible with ropes from 8.5mm to 10.5mm
- Weight: 210g 7.4 oz
-
Edelrid Joker III Harness$69.54An adjustable harness for climbing centers, guided courses and training events. Learn More
-
Edelrid Joker Junior III Harness$69.54An adjustable harness for climbing centers, guided courses and training events. Learn More
-
Felco C16 Wire Rope Cutter$575.52The Felco C16 Wire Cutter has a capacity of 5/8 in. diameter and smaller. This is the GO-TO zipline cable cutter in the industry. Felco cutters keep cutting for years longer than other cable cutters. Learn More
-
Petzl CANYON Harness$186.95Whitewater cascades, rappelling, caving, spelunking, swimming, jumping, ziplining... this is the domain of the CANYON harness. Rugged, non-absorbent materials ensure lightweight longevity for all your aquatic adventures. Learn More
-
Mio Cable Grab for 3/8" Wire Rope$235.40
atented cable grabs are designed to provide fall protection for workers ascending or descending from a variety of ladders or vertical structures. The stainless steel cable grab is easily removed or repositioned along a cable. If a fall occurs, the cable grab is designed to immediately lock onto the cable and prevent a free fall. Sold with an integrated shock absorber. Users should be familiar with all warnings and instructions and receive training in the proper use of this device. Product Specs: Universal design Auto traveling operation Durable, lightweight stainless steel design Meets applicable OSHA Standards and ANSI requirements. Recommended lifelines 3/8″ diameter stainless steel or galvanized 7×19 aircraft cable (non-lubed) with minimum tensile strength of 8,000 lbs.
MUST be attached to worker’s harness using ANSI rated autolocking carabiner (NOT included)
Learn More -
Machine BoltsAs low as $5.45Our Machine Bolts are hot dip galvanized, forged steel, quenched and tempered and are sold with hex nuts attached. Round or square washers and lock washers can be added separately. Learn More
-
EDELWEISS MYGALE Universal Sit Harness$49.45
A great harness for group users such as clubs, schools and camps. A great value in a fully adjustable harness. Easily adjustable harness with a single tie in point.
- Weight: 400 grams
- Number of buckles: 3
- Gear loops: 0
- Single reinforced tie in
- Universal size fits up to 47" waist.
- CE and UIAA Certified
-
EYE NUTS and EYELETS$10.56EYE NUTS and EYELETS, Eyelets, also known as Bolt Eyes, are used under the head or nut of a bolt. All are compatible with the strength of the bolts used with them. Learn More
-
CMI "Beast" Tour Trolley Pulley$501.55CMI "Beast" Tour Trolley Pulley, Designed for the fast lane of zip line tours, this trolley features a front bumper, reinforced 'crimped' side bars and forward facing design with drop down handles. Learn More
-
Large UltrascendersAs low as $212.25Our new Ultrascenders are designed to be the most convenient and easy to use ascenders around. We've added a new ergonomically designed safety mechanism which is integrated into the handle channel for maximum ease of use in those long "over the lip" stretches. Learn More
-
Small UltrascendersAs low as $198.00Our new Ultrascenders are designed to be the most convenient, easiest to use and most comfortable ascenders around. We've added a new ergonomically designed safety mechanism which is integrated into the handle channel for maximum ease. Learn More
-
Splicing FidsAs low as $16.78
These splicing fids are used to make splicing rope easier. Fid is made from stainless steel and hardwood. Comes in two sizes
Small: for rope sizes up to 58"
Large: for rope sizes 5/8" and larger
Learn More -
SINGING ROCK PROFI WORKER 3D STANDARD HARNESS$258.45
Fully adjustable harness for work positioning withcontinuous adjustable webbing, SPEED buckles, padded wide waist belt, anatomicleg loops and shoulder straps.
- super comfortable wide waist belt padding provides maximum comfort when working at height
- strength webbing on the waist belt is stitched in the way that at normal working situation the body weight is absorbed by the padding only
- reflective strap and printing on the waist belt and a reflective strap on the shoulder padding increase the visibility in dark working conditions (the black version of the harness is not equipped with the reflective elements)
- anatomic leg loops and waist belt are covered with strong PES fabric providing high abrasion resistance
- standard easy lock buckles enable smooth adjustment
- narrowed padding and webbing on the shoulder straps in a neck area enhance comfortable work
- leg loops connection straps made from durable PES webbing for better abrasion resistance
- front and back attachment points for fall arrest according to EN 361 marked with additional “A“ marking
- flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus
- front lower attachment point for descender placement or work positioning according to EN 813
- 2 side attachment points for work positioning according to EN 358
- 4 ergonomic braided gear loops with a bearing capacity of 5 kg
- heavier items up to 35 kg can be attached to the webbing on the waist belt
- additional loops on the waist belt and leg loops with a bearing capacity of 5 kg offer additional space for the gear and better gear organization
- wide elastic band at left shoulder strap for the gear attachment (e.g. transmitter)
- slots at the waist belt for Porter tool holder to carry your industrial tools
- shoulder attachment points for confined space rescue according to EN 1497
- chest ascender smart fixation system (using an additional maillon), works best with Cam Clean
- all steel components finished with E-coating for higher corrosion resistance
- identification and methodical label
- Weight: 177g, 62.68oz
- Max Rated Load: 150 kg
- Certifications: EN 358, EN 361, EN 813, EN 1497, CE 1019
-
Head Rush zipSTOP Brake Trolley with Catch$316.80The Head Rush Brake Trolley is a replacement for the brake trolley that came with your zipSTOP Zip Line Brake. Learn More
-
Petzl I'D Belay Device DescenderAs low as $351.95The Petzl ID is a self-braking descender with an anti-panic function built in. Learn More
-
Robertson Stargate Spinstatic SRD$117.70STARGATE SRD -Shear Reduction Device, The 4" aluminum sheave is hard anodized and pared from any excess weight, while the stainless frame surrounds the sheave with minimal surface contact Learn More
-
Petzl Express SlingAs low as $7.85Petzl Express Sling, The ergonomic shape of the EXPRESS webbing offers excellent grip when working a route. The STRING allows the carabiner to be held in position and protects the webbing from wear. Learn More
-
3/4" Nut Eye Bolts$12.54Nut Eye bolts are the main bolts used in ropes challenge course and zip line construction. Zipline and other cables are terminated to the eye bolt around a thimble to prevent cable deformation at the turn back. Learn More
-
Petzl Tibloc Ascender$38.45In a bind, this ultra-lightweight ascender can be used to build hauling systems or as a Prusik-replacement in self-rescue situations. Learn More
-
Petzl Gym Climbing/Zipline Harness$81.35This is a simplified version of the PANDION without a equipment loop for climbing rental programs, zipline programs etc. Learn More