Search results for: 'can I ask you a-1 waitfor delay '0:0:15' --'

For hostile environments and maximum service life. Blue Anodized Aluminum sideplates, 2 3/8" Aluminum sheave, Bearing, and Stainless Steel axle. Learn More

A smooth feeding, controlled braking device that looks great. Notch on one side of the device provides additional braking friction for thinner ropes giving you controlled descents and belays. Use on 8mm to 12mm ropes.

• Weight: 54 grams
• Rope Diameter Range: 8mm - 12mm
• CE EN15151-2

Learn More

Holds the connector in place and protects the webbing from abrasion. Available in two sizes. Learn More

CMI Double Expedition Ascender, The cam is the same design as those in our now famous Ultrascenders and carries the same lifetime wear-out guarantee. Extra large handgrip opening easily accomodates gloved or mittened hands Learn More

GUY ANCHORS- Helix Ground Anchors : 6" x 3/4" x 66" Learn More

GUY ANCHORS- Helix Ground Anchors : 4" x 3/4" x 54" Learn More

A compact, ultra-light belay and abseil device for half ropes and twin ropes. The only suitable device for use with the Flycatcher 6.9 mm. Learn More

Kong Futura Foot Ascender, the Futura system (hand ascender, chest ascender and foot ascender) will be the most compact SRT hardware available on the market - but it will not be the cheapest! The Futura is here. A radical new approach to climbing ropes. Designed by top cavers for tight places in the most remote areas on earth (or under it). Surprisingly simple the new designs are comfortable to use thanks to the ergonomic grips. Learn More

The HaulerBiner Compact Rescue Kit is a lightweight, compact and simple to use/deploy device. The HaulerBiner is fully rated for lifting people. The HaulerBiner has three pulley wheels incorporated into each carabiner, creating a compact and lightweight 6:1 or 7:1 (theoretical) mechanical advantage system. The HaulerBiner also has a purpose-designed progress capture cam with, an ‘on/off’ position.  The HaulerBiner utilises purpose-developed 6mm (1/4") rope, for strength and easy handling/best grip.  The kit is supplied in a two-pouch bag, for easy deployment. The HaulerBiner is load rated to 140kg (310lbs) but it has an MBS of at least 16kN/3500lbs tested as a complete system. The length of the system, when fully contracted is only 32cm (12"). EN 12278, EN 567 certifications

Learn More

Whitewater cascades, rappelling, caving, spelunking, swimming, jumping, ziplining... this is the domain of the CANYON harness. Rugged, non-absorbent materials ensure lightweight longevity for all your aquatic adventures. Learn More

CMI Zip Line Trolley Lanyard makes zip lining a cinch. A rider should have two separate lanyards attached to the trolley for a safe and secure zip lining ride Learn More

CMC now offers the standard utility scissors with titanium bonded blades. Using a patented process, titanium is bonded to a stainless steel core to produce a sharper, more corrosion resistant, longer lasting edge. Learn More

Steel carabiners are referred in ropes course, zip line, and cable applications. Learn More

The Ascension Ascender by Petzl is the benchmark for handled ascenders and has been refined to provide greater comfort; efficiency, ease of use. Learn More

Detachable Pole and Tree Step, These are the preferred security steps for ropes challenge courses either rin trees or poles. Lag bolt and plate are installed into a ropes course pole or tree. Learn More

3D-Vent women’s harness. Our fully-adjustable Solaris women’s harness features EDELRID 3D-Vent Technology and is specially designed to fit the female anatomy. Learn More

Our new Ultrascenders are designed to be the most convenient and easy to use ascenders around. We've added a new ergonomically designed safety mechanism which is integrated into the handle channel for maximum ease of use in those long "over the lip" stretches. Learn More

Fully adjustable full body harness intended for rope courses and adventure parks.

• CE 1019, EN12277, EN161
• front attachment point for belaying and rappeling according to EN 12277 type C
• waist belt and the leg loops without the padding enables to put the harness to every person
• rear steel D-ring with a bearing capacity of 15 kN according EN 361
• waist belt, shoulder straps and the leg loops are easily adjustable with easy lock buckles
• red webbing strap stitched into the buckles simplify handling with them
• all steel components are finished with E-coating technology for higher corrosion resistance
• left leg loop with red color helps to put the harness on
• waist belt webbing is in red as well for easier orientation in the harness
• dorsal plastic plate with different color according the size of the harness (S – yellow, UNI – red)
• construction ensures long-time operation and efficiency (easy releasing and fastening even when dirty and tough webbing)
• Rear dorsal plate for easy size identification. Yellow = Small. Red = Universal Sizing
• Weight: 1050g
• Size: S (110-150cm/43.3in -59in)/UNI (150cm-200cm/59in-79in)

Learn More

A unique full body harness with jointed padding for the children up to 40 kg. Learn More

The Rope Ladder provides moderately challenging access to high elements or an alternative to staple climbs. Constructed of double lashed hardwood dowels with waxed nylon cord to increase durability. Professional installation required.

 

Cost is by: LINEAR FOOT 

Learn More

The SWIVEL OPEN gated swivel features a wide opening and thus can be attached to a range of products (pulleys, lanyards). It reduces the bulk and weight of component systems and solves the twisting and tangling problems of ropes and lanyards. Sealed ball bearings offer excellent performance and reliability.

Learn More

Our new Ultrascenders are designed to be the most convenient, easiest to use and most comfortable ascenders around. We've added a new ergonomically designed safety mechanism which is integrated into the handle channel for maximum ease. Learn More

When closed with a wrench, this steel quick link becomes a semi-permanent anchor ring. Learn More

Customize your KASK rescue helmet while adding increased night visibility. Decals are manufactured from high-quality 3M reflective material and die-cut for easy installation. Learn More

Petzl Rope Bucket, The Petzl Rope Bucket has a unique tapered design and thin layer of closed cell foam enable the bag to stand up by itself and stay open. Learn More

This model of removable climbing holds installs a small wedge mount with two lag screws. Climbing hold can be placed on and removed from wedge.  wedge is small and uncomfortable to grip or climb on serving as basic access restriction.

Learn More

This model of removable climbing holds installs a small wedge mount with two lag screws. Climbing hold can be placed on and removed from wedge.  wedge is small and uncomfortable to grip or climb on serving as basic access restriction.

Learn More

These lightweight belay/rappel gloves combine the durability of a work glove with the precise fit and dexterity of a thinner glove. Double-layered leather protects the palm and other high-wear areas. Learn More

Our larger cords have a very durable sheath and high MBS which makes them great for prusik cords, cordelettes, ice threads, and lightweight low-stretch fixing and hauling "tag" lines. Learn More

Asymmetrical Y-shaped sewn lanyard made of flat webbing, * Used with an ASCENSION handled rope clamp for progression on a rope, * Asymmetrical Y-shape for ease of movement: Learn More

The ELIA helmet was designed and developed to respond specifically to the needs of women. The innovative OMEGA headband system (Petzl patent) allows the helmet to be put on and removed easily and offers maximum comfort. In addition to this exclusive feature, the helmet has a new headband adjustment mechanism. It allows the helmet to be precisely adjusted for different head shapes. Learn More

The NEST litter was developed in partnership with the French national caving rescue organization. It allows a victim to be transported horizontally, vertically or at an angle. Learn More

Petzl Basic Ascender, The BASIC is a compact ascender that offers excellent grip for rope ascents. The lower attachment hole is large enough to hold the carabiners for the lanyard and the footloop. Learn More

CMI Sport Racks are formed from 5/16" diameter stainless steel and are fitted with oversize stainless steel bars. We chose stainless steel over aluminum because of its "wearever" qualities. Learn More

Compact self-braking descender, Lock off and work with minimum gear to tangle. The Petzl Rig is a proven performer for the zip line and ropes course construction industry. Learn More

When closed with a wrench, this steel quick link becomes a semi-permanent anchor ring. Learn More