Search results for: 'cmi protect double rescue pulley'
- Did you mean
- cm protect double rescue pulley
-
GUY ANCHORS- Helix Ground Anchors : 10" x 1-1/4" x 96"$197.95GUY ANCHORS- Helix Ground Anchors : 10" x 1-1/4" x 96" Learn More
-
GUY ANCHORS- Helix Ground Anchors : 8" x 1" x 66"$104.65GUY ANCHORS- Helix Ground Anchors : 8" x 1" x 66" Learn More
-
GUY ANCHORS- Helix Ground Anchors : 6" x 3/4" x 66"$75.61GUY ANCHORS- Helix Ground Anchors : 6" x 3/4" x 66" Learn More
-
GUY ANCHORS- Helix Ground Anchors : 4" x 3/4" x 54"$65.05GUY ANCHORS- Helix Ground Anchors : 4" x 3/4" x 54" Learn More
-
Petzl P58 SO Open Gated Swivel with Sealed Ball Bearings, Yellow/Black$87.95
The SWIVEL OPEN gated swivel features a wide opening and thus can be attached to a range of products (pulleys, lanyards). It reduces the bulk and weight of component systems and solves the twisting and tangling problems of ropes and lanyards. Sealed ball bearings offer excellent performance and reliability.
Learn More -
Detachable Pole and Tree Steps$20.79Detachable Pole and Tree Step, These are the preferred security steps for ropes challenge courses either rin trees or poles. Lag bolt and plate are installed into a ropes course pole or tree. Learn More
-
Petzl OK Carabiner$19.75The symmetrical aluminum OK carabiner has an oval shape that allows optimal positioning of equipment with a wide section. Its Keylock system facilitates manipulations. Learn More
-
-
Petzl TRAC GUIDE Zip Line Trolley$208.95Learn More
The Petzl TRAC GUIDE is a trolley designed for adventure parks. Featuring an ergonomic captive carabiner, it allows the guide to quickly install the trolley on the cable with one hand. Because the carabiner pivots, the trolley remains in position on the cable when it makes contact with the end brake of the zip line. The ends are equipped with protective impact surfaces to reduce the risk of pinched fingers, and two connector support grooves to help avoid abrasion from the cable. The JOKO and AVENTEX lanyards (sold separately) are directly integrated in the carabiner, limiting the risk of separation or loss. The carabiner’s reinforced construction provides greater resistance to damp and salty environments. Product life is extended with highly durable bearings and removable impact surfaces available as spare parts.
- Ergonomic captive carabiner allows the guide to quickly install the trolley on the cable with one hand
- Two aligned sheaves provide excellent stability on the zip line
- Because the carabiner can pivot, the trolley remains in position on the cable when it makes contact with the end brake of the zip line
- Front and rear impact surfaces limit the risk of pinched fingers
- Two positioning support grooves for the connectors limit abrasion from the cable
- JOKO or AVENTEX lanyards are directly integrated in the carabiner, limiting the risk of separating or losing the trolley/lanyard unit (Sold separately)
- Connect easily to the harness with the CARITRAC stowing accessory (included)
- Double-row ball-bearings offer optimal durability
- Carabiner with reinforced construction and hard anodization for greater resistance to damp and salty environments
- Impact surfaces optimize contact between the trolley and the end brake of the zip line
- Carabiner and impact surfaces are completely removable and available as replacement parts to extend the life of the trolley
- Also available in 5-packs
Specifications
- Cable diameter: 9 to 13 mm (may also be used on ropes)
- Material(s): Aluminum frame and carabiner, stainless steel sheave, nylon
- Maximum speed: 25 m/s
- Certification(s): CE EN 17109, CE EN 12278, UIAA
- Weight per unit: 425 g
-
JP Steps Removable Pole Steps - With Lag and Plate$27.45
Just Perfect Pole Steps : JP Steps Removable utility pole and tree steps
Learn More -
-
Petzl Caterpillar Edge Protector$197.93Petzl Caterpillar Edge Protector, The Caterpillar Edge Protector can be positioned independently to adapt to whatever the terrain throws at you Learn More
-
Petzl RIG - Compact self-braking descenderAs low as $263.93Compact self-braking descender, Lock off and work with minimum gear to tangle. The Petzl Rig is a proven performer for the zip line and ropes course construction industry. Learn More
-
Kong Futura Hand AscenderAs low as $118.80Kong Futura Hand Ascender, It is extremely small though easy to use, weighs only 125g, and comes with two different sized handles for ergonomic customisation Learn More
-
Petzl Selena Harness$90.15The elastic leg loops remain adjusted and offer complete freedom of movement. The DoubleBack Light buckle on the waistbelt ensures quick and easy adjustment. Learn More
-
Petzl Paw Rigging PlateAs low as $39.53Petzl Paw Rigging Plate, Coming in three sizes for different set ups the PAW provides strong and lightweight organization for your rope set up. Learn More
-
Petzl SPELEGYCA$49.45Asymmetrical Y-shaped sewn lanyard made of flat webbing, * Used with an ASCENSION handled rope clamp for progression on a rope, * Asymmetrical Y-shape for ease of movement: Learn More
-
Thimbles: Stainless Steel ThimblesAs low as $1.32Stainless Steel Thimbles, When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More
-
Petzl Pantin Ascender$105.53Petzl Pantin Ascender, A big advantage for long rope ascents. With the Pantin Ascender supporting the foot, the body is held in a more upright position thus making the ascent faster and less tiring for the arms. Learn More
-
Petzl Luna HarnessAs low as $87.95The adjustable leg loops of the LUNA harness make it an ideal piece of equipment for mountaineering, ziplining, and ice climbing. Learn More
-
-
Petzl Vertigo Carabiner$32.93The VERTIGO TWIST-LOCK carabiner is designed for use on progression lanyards. Its ergonomic design and automatic locking system facilitate manipulations when passing intermediate anchors. Learn More
-
Zip Line - Super Swage Compacted Cable / Wire Rope$3.23
Zip Line Super Swaged Compacted Cable / Wire Rope - Zip Line Super cable aka Swaged galvanized cable or compacted wire rope is now available! This incredible cable has at least five times the life of ordinary cable, 25% more strength, 10% faster, and runs 50-70% quieter than traditional cable! This is the wire rope to use for a smoth zipline ride.
Learn More -
Petzl Sama Harness$76.95The SAMA harness is ideal for sport climbing and zip lining . With its EndoFrame construction, it provides excellent weight distribution around the waist and legs to ensure greater comfort. Learn More
-
Head Rush zipSTOP Brake Trolley$262.68The Head Rush Brake Trolley is a replacement for the brake trolley that came with your Head Rush zipSTOP Zip Line Brake. Please ensure that you select the correct size for your zip line cable. Learn More
-
Head Rush zipSTOP Zip Line Braking System$5,940.00The Head Rush zipSTOP Braking System. This zipSTOP Brake Trolley is engineered for a fine balance. It is able to handle the abuse of heavy impact collisions, yet light enough to increase the odds of reliable reset. Learn More
-
Robertson Lobster Claws$39.82These lobster Claws are a unique, non-adjustable set of positioning / safety lanyards designed specifically for program high ropes courses. Learn More
-
Petzl AVAO Sit Work harnessAs low as $297.39PetzlAVAO SIT Zipline/Work harness, With a ventral attachment point that distributes the load between the waistbelt and the leg loops during suspended work Learn More
-
Petzl AM'D Pin-Lock$40.85The Am'D PIN-LOCK asymmetrical aluminum carabiner is designed for use with groups. It secures the connection of the user thanks to its PIN-LOCK system, which can only be opened by the operator with a specific unlocking tool. Learn More
-
Mio Cable Grab for 3/8" Wire Rope$235.40
atented cable grabs are designed to provide fall protection for workers ascending or descending from a variety of ladders or vertical structures. The stainless steel cable grab is easily removed or repositioned along a cable. If a fall occurs, the cable grab is designed to immediately lock onto the cable and prevent a free fall. Sold with an integrated shock absorber. Users should be familiar with all warnings and instructions and receive training in the proper use of this device. Product Specs: Universal design Auto traveling operation Durable, lightweight stainless steel design Meets applicable OSHA Standards and ANSI requirements. Recommended lifelines 3/8″ diameter stainless steel or galvanized 7×19 aircraft cable (non-lubed) with minimum tensile strength of 8,000 lbs.
MUST be attached to worker’s harness using ANSI rated autolocking carabiner (NOT included)
Learn More -
Head Rush zipSTOP IR/ zip STOP IR Zip Line Braking System$6,468.00The best brake for your zip line,Head Rush zipSTOP Zip Line Brake uses Head Rush's self-regulating eddy current magnetic braking system to brake zip line riders smoothly, comfortably, and consistently, even at high speeds. Learn More
-
SINGING ROCK PROFI WORKER 3D STANDARD HARNESS$258.45
Fully adjustable harness for work positioning withcontinuous adjustable webbing, SPEED buckles, padded wide waist belt, anatomicleg loops and shoulder straps.
- super comfortable wide waist belt padding provides maximum comfort when working at height
- strength webbing on the waist belt is stitched in the way that at normal working situation the body weight is absorbed by the padding only
- reflective strap and printing on the waist belt and a reflective strap on the shoulder padding increase the visibility in dark working conditions (the black version of the harness is not equipped with the reflective elements)
- anatomic leg loops and waist belt are covered with strong PES fabric providing high abrasion resistance
- standard easy lock buckles enable smooth adjustment
- narrowed padding and webbing on the shoulder straps in a neck area enhance comfortable work
- leg loops connection straps made from durable PES webbing for better abrasion resistance
- front and back attachment points for fall arrest according to EN 361 marked with additional “A“ marking
- flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus
- front lower attachment point for descender placement or work positioning according to EN 813
- 2 side attachment points for work positioning according to EN 358
- 4 ergonomic braided gear loops with a bearing capacity of 5 kg
- heavier items up to 35 kg can be attached to the webbing on the waist belt
- additional loops on the waist belt and leg loops with a bearing capacity of 5 kg offer additional space for the gear and better gear organization
- wide elastic band at left shoulder strap for the gear attachment (e.g. transmitter)
- slots at the waist belt for Porter tool holder to carry your industrial tools
- shoulder attachment points for confined space rescue according to EN 1497
- chest ascender smart fixation system (using an additional maillon), works best with Cam Clean
- all steel components finished with E-coating for higher corrosion resistance
- identification and methodical label
- Weight: 177g, 62.68oz
- Max Rated Load: 150 kg
- Certifications: EN 358, EN 361, EN 813, EN 1497, CE 1019
-
Edelrid KAA Haul System - 150CmSpecial Price $249.98 Regular Price $277.20
The KAA is a self contained mechanical advantage system for tensioning lines or lifting people during rescues. In addition, as the KAA is certified to EN 354, it can be used for workplace stabilization, as a restraint system (open/closed), and for controlled lowering. Its strap-based construction makes it the most compact and lightweight system on the market. Depending on the orientation, it offers a 4:1 or 5:1 lifting ratio with an efficiency of 91%. The KAA is packaged compactly and ready for immediate use, so that no valuable time is lost when it is required. A swivel is provided at each end to prevent the system from twisting. The hand lever on the draw cord makes it easier to pull and can also be used as a lowering lever.
Weight: 500g (1.1lbs)
MBS: 22kN
Certification: EN 354
Efficiency: 91%
- Compact and lightweight due to strap-based construction
- 4:1 or 5:1 mechanical advantage
- Can be set up in seconds
- Swivels on both ends
-
Petzl Swan Easy-Fit Full Body Harness$186.95
Durable, easy-to-use full-body harness for adventure parks
Learn MoreSWAN® EASYFIT STEEL is a full-body harness designed for adventure parks. Its straps are color-coded to make donning easier. It is equipped with a FAST LT PIN-LOCK buckle to secure harness fastening; the PIN-LOCK locking system can only be opened by the guide with a special tool. The raised position of the connection point limits the risk of the client flipping. Its durability makes for easy maintenance and extended product life. Its single size and identification areas simplify equipment inventory management.
Detailed description
- Very easy to use full-body harness designed for adventure parks:
- Easy to install on the client, with FAST buckles at the rear of the harness
- Right/left color coding makes it easier to give donning instructions to clients
- Self-locking DOUBLEBACK buckles for quick and easy adjustment
- Excellent grip on webbing ends facilitates adjustment, even with gloves - Protects the client during progression:
- FAST LT PIN-LOCK waistbelt buckle can only be unlocked with a special tool, limiting the risk of the participant opening the buckle
- Wide ventral attachment point is color-coded green, making it easier to install the JOKO or AVENTEX lanyards and allowing for a quick visual check; the raised position of the attachment point limits the risk of the client flipping
- Anatomical design is close-fitting yet allows optimal freedom of movement
- Two side equipment loops make it easy to carry lanyard connectors - Excellent durability for easy maintenance and extended product life:
- Durable metal attachment point
- Webbing designed for intensive use and smooth adjustment - Easy equipment management for guide or monitor:
- Single size, adapts to most body types
- Marking area on the outside of the harness for easy identification when stored
- Identification panel integrated in the harness to track the equipment throughout its lifespan
- Easy to clean - Accessories to adapt the harness according to need:
- Leg loop foam for greater comfort when hanging for long periods of time
- CARITRAC stowing accessory to easily stow TRAC trolleys - Comes with an unlocking tool for the FAST LT PIN-LOCK buckle which can be easily carried on the guide’s harness
- Available individually or in packs of five
Specifications
- Material(s): Polyester webbing, aluminum attachment point, steel buckles, nylon
- Certification(s): CE EN 12277 type A, UIAA
- Weight per unit: 1125 g
- Waist belt: <120 cm
- Leg loops: <75 cm
- Stature: <200 cm
- Very easy to use full-body harness designed for adventure parks:






























