Search results for: 'fasten zip trolley and 30 567 hold'
-
Head Rush zipSTOP IR Replacement Braking Line$330.00The Head Rush zipSTOP IR Zip Line Brake is fitted with a braking line that can be replaced easily in the field by the owner using the Replacement Braking Line. Learn More
-
Robertson Superman Harness$378.17Commercial grade harness acceptable for use in engineered zip line tours, canopy tours, and aerial adventure/trekking parks Learn More
-
Deep Cut Pole Auger Bits: 24"As low as $46.70Deep Cut telephone Pole Auger Bits: 24", Super long 24" Pole Auger Bits for telephone poles, utility poles, treated poles, ropes course and zip line poles. Designed for making deep cuts in utility poles, pressure treated lumber, railroad ties, and wet or frozen lumber. Learn More
-
Yates Figure Eight Chest Harness$54.95Yates Figure Eight Chest Harness, Great for use on zip line operations. Attachment points at waist and between shoulders. Safety attachment at rear of waist. Padded waist belt. Super easy to get on and adjust. Learn More
-
Adjama Climbing HarnessAs low as $98.93Adjama Climbing Harness, Lightweight and very flexible, thanks to the Delta System leg loop front panels and small dimension leg buckles. Learn More
-
3/4" Nut Eye Bolts$12.54Nut Eye bolts are the main bolts used in ropes challenge course and zip line construction. Zipline and other cables are terminated to the eye bolt around a thimble to prevent cable deformation at the turn back. Learn More
-
Petzl CANYON Harness$186.95Whitewater cascades, rappelling, caving, spelunking, swimming, jumping, ziplining... this is the domain of the CANYON harness. Rugged, non-absorbent materials ensure lightweight longevity for all your aquatic adventures. Learn More
-
Lag Screws: Lag BoltsAs low as $1.76Lag Screw Lag Bolt - Galvanized, Typically used for LEAP anchors, deck constuction for zip lines and ropes courses. Hot Dipped Galvanized; Hex Head Lag Screw. 5/8" x 6" lags or 5/8" x 8" lags are recommended for Leap/Lead/Bolt hanger anchors where through bolts are not required Learn More
-
CARGO NETS: Climbing Cargo Nets$1,102.20Get the best selection and best quality of Cargo Climbing and Ropes Course Nets. Our nets and ladder are constructed of high quality materials and even higher quality workmanship. Learn More
-
Petzl RIG - Compact self-braking descenderAs low as $263.93Compact self-braking descender, Lock off and work with minimum gear to tangle. The Petzl Rig is a proven performer for the zip line and ropes course construction industry. Learn More
-
GUY ANCHORS- Helix Ground AnchorsAs low as $65.05GUY ANCHORS- Helix Ground Anchors, Multiple sizes and capacities allow precise designs for the adventure and zip line industry. There may be one or multiple guywires that can be resisted by one or multiple guy wire anchors, dictated by design and load requirements. Learn More
-
Petzl Rope Bucket$67.25Petzl Rope Bucket, The Petzl Rope Bucket has a unique tapered design and thin layer of closed cell foam enable the bag to stand up by itself and stay open. Learn More
-
Edelrid Mega Jul$47.45Our most versatile belay and abseil device made of solid stainless steel for durability. Learn More
-
Petzl Jane Lanyard$39.53Can be combined with an ABSORBICA energy absorber to set up an energy-absorbing «I» or «Y» lanyard of less than two meters in length Learn More
-
Nail Chipper Tri-Cut Auger BitsAs low as $48.32Nail Chipper Tri-Cut Auger Bits, Typically when drilling a hole for a through bolt as used in ropes course or zip line construction, you will need to drill a hole 1/16" bigger than the bolt you are using. 5/8" bolt requires a 11/16" hole. These are all 18" long bits. 7-1/2" are available by request. Learn More
-
Edelrid Mega Jul Belay Kit$85.73The Mega Jul Belay Kit with our Mega Jul belay device and the HMS Strike FG Carabiner. Learn More
-
Edelrid Jul2$43.49Innovative belay device with high braking performance for single ropes. The optimized Mega Jul geometry ensures easy and secure belaying even with thicker ropes. Learn More
-
Petzl SPELEGYCA$49.45Asymmetrical Y-shaped sewn lanyard made of flat webbing, * Used with an ASCENSION handled rope clamp for progression on a rope, * Asymmetrical Y-shape for ease of movement: Learn More
-
Petzl Express SlingAs low as $7.85Petzl Express Sling, The ergonomic shape of the EXPRESS webbing offers excellent grip when working a route. The STRING allows the carabiner to be held in position and protects the webbing from wear. Learn More
-
Kong - Medale - Via Ferrata$195.80
Via Ferrata set made with 20 mm tubular webbing lanyards with inner elastic and Tango alu alloy connectors with double gate safety system.
Learn More
Fitted with high strength stitching and an energy absorber housed in a bag with zip for easy inspection.
Conforms to the safety requirements of the new revision of EN 958:2017, which includes a load between 40 and 120 kg.
Total length of the set: min. 85 cm - max. 120 cm. -
Zipline Brake Barrell Spring$143.00
These patented barrel springs reduce initial impact by stopping the rider more gradually than traditional springs.
Determining how many springs you will need is easy! Simply take the incoming speed of your rider and for each mph, you need that many springs. (e.g., a 20-MPH zipline needs 20 springs for a 230-lb zipliner).
All spring systems REQUIRE TESTING to the maximum anticipated speed and load as per ACCT. Can be completed with a minimum of 250 lb. weights, sandbags, or bagged rock salt.
These Zipline Brakes install in minutes, NOT hours.
Made in the USA.
Each spring array includes a bumper at the beginning for trolley strikes.
Learn More -
Teufelberger (New England) KM III 5/16"$186.12A superior handling rescue rope, Teufelberger (New England) Ropes KM III static, kernmantle rope features a composite construction of nylon and polyester fibers. Learn More
-
Teufelberger (New England) KM III 5/8"$351.12A superior handling rescue rope, Teufelberger (New England) Ropes KM III static, kernmantle rope features a composite construction of nylon and polyester fibers. Learn More
-
Finesse Zipline Harness$105.53The Finesse climbing/zipline harness is designed specifically for women. It is slightly narrower and lighter than our Silhouette harness, making it a great choice for single pitch or sport climbing applications or even zipline runs. Learn More
-
Teufelberger (New England) KM III 3/8"$196.68A superior handling rescue rope, Teufelberger (New England) Ropes KM III static, kernmantle rope features a composite construction of nylon and polyester fibers. Learn More
-
Petzl Stop Descender Device$186.95Originally designed for single rope descents in caving, the Stop has become a standard tool for the rope access worker. The Stop is designed to automatically "stop" the descent when the red handle is not depressed. Learn More
-
Teufelberger (New England) KM III 1/2"$254.76A superior handling rescue rope, Teufelberger (New England) Ropes KM III static, kernmantle rope features a composite construction of nylon and polyester fibers. Learn More
-
GriGri 2 Belay Device$109.95The GRIGRI 2 belay device with assisted braking is designed to facilitate belay maneuvers. Learn More
-
-
/12" Carriage Bolt w/Nut & WasherAs low as $1.82Carriage Bolt w/Nut & Washer, The square neck under the round head will seat into the hole in the wood to prevent the head from turning. Because they are used with wood, carriage bolts are rarely high strength and virtually always supplied in a standard ASTM A307 specification. Learn More
-
Tarzan Economic Universal Full Body Harness$142.95
Fully adjustable full body harness intended for rope courses and adventure parks.
- CE 1019, EN12277, EN161
- front attachment point for belaying and rappeling according to EN 12277 type C
- waist belt and the leg loops without the padding enables to put the harness to every person
- rear steel D-ring with a bearing capacity of 15 kN according EN 361
- waist belt, shoulder straps and the leg loops are easily adjustable with easy lock buckles
- red webbing strap stitched into the buckles simplify handling with them
- all steel components are finished with E-coating technology for higher corrosion resistance
- left leg loop with red color helps to put the harness on
- waist belt webbing is in red as well for easier orientation in the harness
- dorsal plastic plate with different color according the size of the harness (S – yellow, UNI – red)
- construction ensures long-time operation and efficiency (easy releasing and fastening even when dirty and tough webbing)
- Rear dorsal plate for easy size identification. Yellow = Small. Red = Universal Sizing
- Weight: 1050g
- Size: S (110-150cm/43.3in -59in)/UNI (150cm-200cm/59in-79in)
-
CMI Micro Haul Pulleys$209.37The perfect size for light and tower rescues. Fits ropes from 8mm to 1/2". Features built in safety cam for use in "jigger" or "short haul" systems. Use with CMI micro single or double pulley 3:1 or 4:1 mechanical advantage systems. Features a centered bronze bushing. Strength: 7000 lbs. The CMI Single Micro Hauler is 154 mm. tall, 53 mm wide, and 40 mm. thick and 19 g. Learn More
-
Thimbles: Stainless Steel ThimblesAs low as $1.32Stainless Steel Thimbles, When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More
-
Petzl Sequoia HarnessAs low as $516.95The SEQUOIA is a seat harness for tree care. It is designed for the arborist's comfort. The extra-wide, semi-rigid waist belt and leg loops give excellent support. Learn More
-
Universal Accessibility Kit (UAK-1)
Starting at $23.78
Looking to enhance your program offerings with some specialized equipment? ESI offers three different universal accessibility kits that come complete with a variety of equipment that will help serve the needs of climbers who need additional support.
The UAK-1 comes complete with the following:
If you need additional components for a larger course, ask us about the UAK-2 and UAK-3.
- Misty Mountain Easy Seat - a specialized rigid yet padded seat that has an integrated rated harness system allowing lower body support without sacrificing upper body mobility.
- Handlebar Ascender (Wellman pull-up bar or similar) - a traditional ascender mechanism that will grab the rope with the integrated cam while also providing a variety of hand hold options including the built in handlebars.
- 1M Mechanical Advantage System (Petzl JAG or similar) - this compact system provides mechanical advantage at your fingertips when climbing at height and needing assistance transferring from one cable to the other.
- Trolley w/ anti-rollback cam (ISC Zippy or similar) - this trolley allows for smooth forward movement on a course and option to sit in the system and take a break without losing forward momentum.
- Bosun chair (Petzl Podium or similar) - a rigid chair that is stowed out of the way on the climber and dropped into position at any point along the climb as an extra seat providing quick lower body support and resting spot.
- ISC R-ALF Pulley System - this system creates a 5:1 mechanical advantage with integrated locking hub option for those climbers who need assistance ascending vertically into a course. It includes everything needed for the full system including the R-ALF hub, two double pulleys, rope, carabiners and a handy storage bag.
-